| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fallocate updates from Christian Brauner:
"This contains work to try and cleanup some the fallocate mode
handling. Currently, it confusingly mixes operation modes and an
optional flag.
The work here tries to better define operation modes and optional
flags allowing the core and filesystem code to use switch statements
to switch on the operation mode"
* tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: refactor xfs_file_fallocate
xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space
xfs: call xfs_flush_unmap_range from xfs_free_file_space
fs: sort out the fallocate mode vs flag mess
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
block: remove checks for FALLOC_FL_NO_HIDE_STALE
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
A recent commit added support for copying registered buffers from one
ring to another. But that term is a bit confusing, as no copying of
buffer data is done here. What is being done is simply cloning the
buffer registrations from one ring to another.
Rename it while we still can, so that it's more descriptive. No
functional changes in this patch.
Fixes: 7cc2a6eadcd7 ("io_uring: add IORING_REGISTER_COPY_BUFFERS method")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The FIB rule TOS selector is implemented differently between IPv4 and
IPv6. In IPv4 it is used to match on the three "Type of Services" bits
specified in RFC 791, while in IPv6 is it is used to match on the six
DSCP bits specified in RFC 2474.
Add a new FIB rule attribute to allow matching on DSCP. The attribute
will be used to implement a 'dscp' selector in ip-rule with a consistent
behavior between IPv4 and IPv6.
For now, set the type of the attribute to 'NLA_REJECT' so that user
space will not be able to configure it. This restriction will be lifted
once both IPv4 and IPv6 support the new attribute.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The uAPI headers for IPX were deleted 3 years ago in
commit 6c9b40844751 ("net: Remove net/ipx.h and uapi/linux/ipx.h header files")
Delete the leftover defines from libc-compat.h
Link: https://patch.msgid.link/20240911002142.1508694-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Buffers can get registered with io_uring, which allows to skip the
repeated pin_pages, unpin/unref pages for each O_DIRECT operation. This
reduces the overhead of O_DIRECT IO.
However, registrering buffers can take some time. Normally this isn't an
issue as it's done at initialization time (and hence less critical), but
for cases where rings can be created and destroyed as part of an IO
thread pool, registering the same buffers for multiple rings become a
more time sensitive proposition. As an example, let's say an application
has an IO memory pool of 500G. Initial registration takes:
Got 500 huge pages (each 1024MB)
Registered 500 pages in 409 msec
or about 0.4 seconds. If we go higher to 900 1GB huge pages being
registered:
Registered 900 pages in 738 msec
which is, as expected, a fully linear scaling.
Rather than have each ring pin/map/register the same buffer pool,
provide an io_uring_register(2) opcode to simply duplicate the buffers
that are registered with another ring. Adding the same 900GB of
registered buffers to the target ring can then be accomplished in:
Copied 900 pages in 17 usec
While timing differs a bit, this provides around a 25,000-40,000x
speedup for this use case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A patch for Qualcomm depends on some fixes.
|
|
Internal PHY is initialized as per the PHY register capability supported
by the MAC-PHY. Direct PHY Register Access Capability indicates if PHY
registers are directly accessible within the SPI register memory space.
Indirect PHY Register Access Capability indicates if PHY registers are
indirectly accessible through the MDIO/MDC registers MDIOACCn defined in
OPEN Alliance specification. Currently the direct register access is only
supported.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-7-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add dmabuf information to page_pool stats:
$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump page-pool-get
...
{'dmabuf': 10,
'id': 456,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 455,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 454,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 453,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 452,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 451,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 450,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 449,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
And queue stats:
$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump queue-get
...
{'dmabuf': 10, 'id': 8, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 9, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 10, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 11, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 12, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 13, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 14, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 15, 'ifindex': 3, 'type': 'rx'},
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-14-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an interface for the user to notify the kernel that it is done
reading the devmem dmabuf frags returned as cmsg. The kernel will
drop the reference on the frags to make them available for reuse.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910171458.219195-11-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In tcp_recvmsg_locked(), detect if the skb being received by the user
is a devmem skb. In this case - if the user provided the MSG_SOCK_DEVMEM
flag - pass it to tcp_recvmsg_devmem() for custom handling.
tcp_recvmsg_devmem() copies any data in the skb header to the linear
buffer, and returns a cmsg to the user indicating the number of bytes
returned in the linear buffer.
tcp_recvmsg_devmem() then loops over the unaccessible devmem skb frags,
and returns to the user a cmsg_devmem indicating the location of the
data in the dmabuf device memory. cmsg_devmem contains this information:
1. the offset into the dmabuf where the payload starts. 'frag_offset'.
2. the size of the frag. 'frag_size'.
3. an opaque token 'frag_token' to return to the kernel when the buffer
is to be released.
The pages awaiting freeing are stored in the newly added
sk->sk_user_frags, and each page passed to userspace is get_page()'d.
This reference is dropped once the userspace indicates that it is
done reading this page. All pages are released when the socket is
destroyed.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910171458.219195-10-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
API takes the dma-buf fd as input, and binds it to the netdevice. The
user can specify the rx queues to bind the dma-buf to.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull in tip/sched/core to resolve two merge conflicts:
- 96fd6c65efc6 ("sched: Factor out update_other_load_avgs() from __update_blocked_others()")
5d871a63997f ("sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c")
A simple context conflict. The former added __update_blocked_others() in
the same #ifdef CONFIG_SMP block that effective_cpu_util() and
sched_cpu_util() are in and the latter moved those functions to fair.c.
This makes __update_blocked_others() more out of place. Will follow up
with a patch to relocate.
- 96fd6c65efc6 ("sched: Factor out update_other_load_avgs() from __update_blocked_others()")
84d265281d6c ("sched/pelt: Use rq_clock_task() for hw_pressure")
The former factored out the body of __update_blocked_others() into
update_other_load_avgs(). The latter changed how update_hw_load_avg() is
called in the body. Resolved by applying the change to
update_other_load_avgs() instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
io_uring allows implementing custom file specific asynchronous
operations via the fops->uring_cmd callback, a.k.a. IORING_OP_URING_CMD
requests or just io_uring commands. Use it to add support for async
discards.
Normally, it first tries to queue up bios in a non-blocking context,
and if that fails, we'd retry from a blocking context by returning
-EAGAIN to the core io_uring. We always get the result from bios
asynchronously by setting a custom bi_end_io callback, at which point
we drag the request into the task context to either reissue or complete
it and post a completion to the user.
Unlike ioctl(BLKDISCARD) with stronger guarantees against races, we only
do a best effort attempt to invalidate page cache, and it can race with
any writes and reads and leave page cache stale. It's the same kind of
races we allow to direct writes.
Also, apart from cases where discarding is not allowed at all, e.g.
discards are not supported or the file/device is read only, the user
should assume that the sector range on disk is not valid anymore, even
when an error was returned to the user.
Suggested-by: Conrad Meyer <conradmeyer@meta.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2b5210443e4fa0257934f73dfafcc18a77cd0e09.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-6.12/io_uring: (31 commits)
io_uring/io-wq: inherit cpuset of cgroup in io worker
io_uring/io-wq: do not allow pinning outside of cpuset
io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()
io_uring/rw: treat -EOPNOTSUPP for IOCB_NOWAIT like -EAGAIN
io_uring/sqpoll: do not allow pinning outside of cpuset
io_uring/eventfd: move refs to refcount_t
io_uring: remove unused rsrc_put_fn
io_uring: add new line after variable declaration
io_uring: add GCOV_PROFILE_URING Kconfig option
io_uring/kbuf: add support for incremental buffer consumption
io_uring/kbuf: pass in 'len' argument for buffer commit
Revert "io_uring: Require zeroed sqe->len on provided-buffers send"
io_uring/kbuf: move io_ring_head_to_buf() to kbuf.h
io_uring/kbuf: add io_kbuf_commit() helper
io_uring/kbuf: shrink nr_iovs/mode in struct buf_sel_arg
io_uring: wire up min batch wake timeout
io_uring: add support for batch wait timeout
io_uring: implement our own schedule timeout handling
io_uring: move schedule wait logic into helper
io_uring: encapsulate extraneous wait flags into a separate struct
...
|
|
* for-6.12/block: (115 commits)
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
md: Add new_level sysfs interface
zram: Shrink zram_table_entry::flags.
zram: Remove ZRAM_LOCK
zram: Replace bit spinlocks with a spinlock_t.
...
|
|
Specify the time values of the deadline parameters of deadline,
runtime, and period as being in nanoseconds explicitly as they always
have been.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240813144348.1180344-3-christian.loehle@arm.com
|
|
PCIe r6.0 changed the abbreviation for "Configuration Request Retry Status"
Completion Status from "CRS" to "RRS" and uses the terminology of
"Configuration RRS Software Visibility" instead of "CRS Software
Visibility".
Align the Linux usage with the r6.0 spec language. No functional change
intended.
It's confusing to make this change, but I think "RRS" *is* a better
abbreviation because it was easy to interpret "CRS" as "Completion Retry
Status", which really didn't make any sense.
Link: https://lore.kernel.org/r/20240827234848.4429-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive
path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter
out rx software timestamp report, especially after a process turns on
netstamp_needed_key which can time stamp every incoming skb.
Previously, we found out if an application starts first which turns on
netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE
could also get rx timestamp. Now we handle this case by introducing this
new flag without breaking users.
Quoting Willem to explain why we need the flag:
"why a process would want to request software timestamp reporting, but
not receive software timestamp generation. The only use I see is when
the application does request
SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE."
Similarly, this new flag could also be used for hardware case where we
can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive
hardware receive timestamp.
Another thing about errqueue in this patch I have a few words to say:
In this case, we need to handle the egress path carefully, or else
reporting the tx timestamp will fail. Egress path and ingress path will
finally call sock_recv_timestamp(). We have to distinguish them.
Errqueue is a good indicator to reflect the flow direction.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new UAPI to support the mac address from vdpa tool
Function vdpa_nl_cmd_dev_attr_set_doit() will get the
new MAC address from the vdpa tool and then set it to the device.
The usage is: vdpa dev set name vdpa_name mac **:**:**:**:**:**
Here is example:
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "82:4d:e9:5d:d7:e6",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}
root@L1# vdpa dev set name vdpa0 mac 00:11:22:33:44:55
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240731031653.1047692-2-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Expose memory scan/reclaim information to the host side via virtio
balloon device.
Now we have a metric to analyze the memory performance:
y: counter increases
n: counter does not changes
h: the rate of counter change is high
l: the rate of counter change is low
OOM: VIRTIO_BALLOON_S_OOM_KILL
STALL: VIRTIO_BALLOON_S_ALLOC_STALL
ASCAN: VIRTIO_BALLOON_S_SCAN_ASYNC
DSCAN: VIRTIO_BALLOON_S_SCAN_DIRECT
ARCLM: VIRTIO_BALLOON_S_RECLAIM_ASYNC
DRCLM: VIRTIO_BALLOON_S_RECLAIM_DIRECT
- OOM[y], STALL[*], ASCAN[*], DSCAN[*], ARCLM[*], DRCLM[*]:
the guest runs under really critial memory pressure
- OOM[n], STALL[h], ASCAN[*], DSCAN[l], ARCLM[*], DRCLM[l]:
the memory allocation stalls due to cgroup, not the global memory
pressure.
- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[h]:
the memory allocation stalls due to global memory pressure. The
performance gets hurt a lot. A high ratio between DRCLM/DSCAN shows
quite effective memory reclaiming.
- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[l]:
the memory allocation stalls due to global memory pressure.
the ratio between DRCLM/DSCAN gets low, the guest OS is thrashing
heavily, the serious case leads poor performance and difficult
trouble shooting. Ex, sshd may block on memory allocation when
accepting new connections, a user can't login a VM by ssh command.
- OOM[n], STALL[n], ASCAN[h], DSCAN[n], ARCLM[l], DRCLM[n]:
the low ratio between ARCLM/ASCAN shows that the guest tries to
reclaim more memory, but it can't. Once more memory is required in
future, it will struggle to reclaim memory.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-5-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Memory allocation stall counter represents the performance/latency of
memory allocation, expose this counter to the host side by virtio
balloon device via out-of-bound way.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-4-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When the guest OS runs under critical memory pressure, the guest
starts to kill processes. A guest monitor agent may scan 'oom_kill'
from /proc/vmstat, and reports the OOM KILL event. However, the agent
may be killed and we will loss this critical event(and the later
events).
For now we can also grep for magic words in guest kernel log from host
side. Rather than this unstable way, virtio balloon reports OOM-KILL
invocations instead.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-3-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The ability to read the PHC (Physical Hardware Clock) alongside
multiple system clocks is currently dependent on the specific
hardware architecture. This limitation restricts the use of
PTP_SYS_OFFSET_PRECISE to certain hardware configurations.
The generic soultion which would work across all architectures
is to read the PHC along with the latency to perform PHC-read as
offered by PTP_SYS_OFFSET_EXTENDED which provides pre and post
timestamps. However, these timestamps are currently limited
to the CLOCK_REALTIME timebase. Since CLOCK_REALTIME is affected
by NTP (or similar time synchronization services), it can
experience significant jumps forward or backward. This hinders
the precise latency measurements that PTP_SYS_OFFSET_EXTENDED
is designed to provide.
This problem could be addressed by supporting MONOTONIC_RAW
timestamps within PTP_SYS_OFFSET_EXTENDED. Unlike CLOCK_REALTIME
or CLOCK_MONOTONIC, the MONOTONIC_RAW timebase is unaffected
by NTP adjustments.
This enhancement can be implemented by utilizing one of the three
reserved words within the PTP_SYS_OFFSET_EXTENDED struct to pass
the clock-id for timestamps. The current behavior aligns with
clock-id for CLOCK_REALTIME timebase (value of 0), ensuring
backward compatibility of the UAPI.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
Patch #1 adds ctnetlink support for kernel side filtering for
deletions, from Changliang Wu.
Patch #2 updates nft_counter support to Use u64_stats_t,
from Sebastian Andrzej Siewior.
Patch #3 uses kmemdup_array() in all xtables frontends,
from Yan Zhen.
Patch #4 is a oneliner to use ERR_CAST() in nf_conntrack instead
opencoded casting, from Shen Lichuan.
Patch #5 removes unused argument in nftables .validate interface,
from Florian Westphal.
Patch #6 is a oneliner to correct a typo in nftables kdoc,
from Simon Horman.
Patch #7 fixes missing kdoc in nftables, also from Simon.
Patch #8 updates nftables to handle timeout less than CONFIG_HZ.
Patch #9 rejects element expiration if timeout is zero,
otherwise it is silently ignored.
Patch #10 disallows element expiration larger than timeout.
Patch #11 removes unnecessary READ_ONCE annotation while mutex is held.
Patch #12 adds missing READ_ONCE/WRITE_ONCE annotation in dynset.
Patch #13 annotates data-races around element expiration.
Patch #14 allocates timeout and expiration in one single set element
extension, they are tighly couple, no reason to keep them
separated anymore.
Patch #15 updates nftables to interpret zero timeout element as never
times out. Note that it is already possible to declare sets
with elements that never time out but this generalizes to all
kind of set with timeouts.
Patch #16 supports for element timeout and expiration updates.
* tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: set element timeout update support
netfilter: nf_tables: zero timeout means element never times out
netfilter: nf_tables: consolidate timeout extension for elements
netfilter: nf_tables: annotate data-races around element expiration
netfilter: nft_dynset: annotate data-races around set timeout
netfilter: nf_tables: remove annotation to access set timeout while holding lock
netfilter: nf_tables: reject expiration higher than timeout
netfilter: nf_tables: reject element expiration with no timeout
netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire
netfilter: nf_tables: Add missing Kernel doc
netfilter: nf_tables: Correct spelling in nf_tables.h
netfilter: nf_tables: drop unused 3rd argument from validate callback ops
netfilter: conntrack: Convert to use ERR_CAST()
netfilter: Use kmemdup_array instead of kmemdup for multiple allocation
netfilter: nft_counter: Use u64_stats_t for statistic.
netfilter: ctnetlink: support CTA_FILTER for flush
====================
Link: https://patch.msgid.link/20240905232920.5481-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document how to use SMI system management interface to enable and
receive SVM events. Document SVM event triggers.
Define SVM events message string format macro that could be used by user
mode for sscanf to parse the event. Add it to uAPI header file to make
it obvious that is changing uAPI in future.
No functional changes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The NBD protocol defines a message for zeroing out a region of an export
Add support to the kernel driver for that message.
Signed-off-by: Wouter Verhelst <w@uter.be>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240812133032.115134-3-w@uter.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new serio ID for the Extron DA HD 4K Plus series of 4K HDMI
Distribution Amplifiers. These devices support CEC over the serial
port, so a new serio ID is needed to be able to associate the CEC
driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add capability flag to indicate that the device is an EDID-only device.
Signed-off-by: Erling Ljunggren <hljunggr@cisco.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Now that we provide a unique 64-bit mount ID interface in statx(2), we
can now provide a race-free way for name_to_handle_at(2) to provide a
file handle and corresponding mount without needing to worry about
racing with /proc/mountinfo parsing or having to open a file just to do
statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and don't
care about an extra statx(2) call, users that pass full paths into
name_to_handle_at(2) need to know which mount the file handle comes from
(to make sure they don't try to open_by_handle_at a file handle from a
different filesystem) and switching to AT_EMPTY_PATH would require
allocating a file for every name_to_handle_at(2) call, turning
err = name_to_handle_at(-EBADF, "/foo/bar/baz", &handle, &mntid,
AT_HANDLE_MNT_ID_UNIQUE);
into
int fd = openat(-EBADF, "/foo/bar/baz", O_PATH | O_CLOEXEC);
err1 = name_to_handle_at(fd, "", &handle, &unused_mntid, AT_EMPTY_PATH);
err2 = statx(fd, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &statxbuf);
mntid = statxbuf.stx_mnt_id;
close(fd);
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-2-10c2c4c16708@cyphar.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unfortunately, the way we have gone about adding new AT_* flags has
been a little messy. In the beginning, all of the AT_* flags had generic
meanings and so it made sense to share the flag bits indiscriminately.
However, we inevitably ran into syscalls that needed their own
syscall-specific flags. Due to the lack of a planned out policy, we
ended up with the following situations:
* Existing syscalls adding new features tended to use new AT_* bits,
with some effort taken to try to re-use bits for flags that were so
obviously syscall specific that they only make sense for a single
syscall (such as the AT_EACCESS/AT_REMOVEDIR/AT_HANDLE_FID triplet).
Given the constraints of bitflags, this works well in practice, but
ideally (to avoid future confusion) we would plan ahead and define a
set of "per-syscall bits" ahead of time so that when allocating new
bits we don't end up with a complete mish-mash of which bits are
supposed to be per-syscall and which aren't.
* New syscalls dealt with this in several ways:
- Some syscalls (like renameat2(2), move_mount(2), fsopen(2), and
fspick(2)) created their separate own flag spaces that have no
overlap with the AT_* flags. Most of these ended up allocating
their bits sequentually.
In the case of move_mount(2) and fspick(2), several flags have
identical meanings to AT_* flags but were allocated in their own
flag space.
This makes sense for syscalls that will never share AT_* flags, but
for some syscalls this leads to duplication with AT_* flags in a
way that could cause confusion (if renameat2(2) grew a
RENAME_EMPTY_PATH it seems likely that users could mistake it for
AT_EMPTY_PATH since it is an *at(2) syscall).
- Some syscalls unfortunately ended up both creating their own flag
space while also using bits from other flag spaces. The most
obvious example is open_tree(2), where the standard usage ends up
using flags from *THREE* separate flag spaces:
open_tree(AT_FDCWD, "/foo", OPEN_TREE_CLONE|O_CLOEXEC|AT_RECURSIVE);
(Note that O_CLOEXEC is also platform-specific, so several future
OPEN_TREE_* bits are also made unusable in one fell swoop.)
It's not entirely clear to me what the "right" choice is for new
syscalls. Just saying that all future VFS syscalls should use AT_* flags
doesn't seem practical. openat2(2) has RESOLVE_* flags (many of which
don't make much sense to burn generic AT_* flags for) and move_mount(2)
has separate AT_*-like flags for both the source and target so separate
flags are needed anyway (though it seems possible that renameat2(2)
could grow *_EMPTY_PATH flags at some point, and it's a bit of a shame
they can't be reused).
But at least for syscalls that _do_ choose to use AT_* flags, we should
explicitly state the policy that 0x2ff is currently intended for
per-syscall flags and that new flags should err on the side of
overlapping with existing flag bits (so we can extend the scope of
generic flags in the future if necessary).
And add AT_* aliases for the RENAME_* flags to further cement that
renameat2(2) is an *at(2) flag, just with its own per-syscall flags.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-1-10c2c4c16708@cyphar.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
RT_TOS() from include/uapi/linux/in_route.h is defined using
IPTOS_TOS_MASK from include/uapi/linux/ip.h. This is problematic for
files such as include/net/ip_fib.h that want to use RT_TOS() as without
including both header files kernel compilation fails:
In file included from ./include/net/ip_fib.h:25,
from ./include/net/route.h:27,
from ./include/net/lwtunnel.h:9,
from net/core/dst.c:24:
./include/net/ip_fib.h: In function ‘fib_dscp_masked_match’:
./include/uapi/linux/in_route.h:31:32: error: ‘IPTOS_TOS_MASK’ undeclared (first use in this function)
31 | #define RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~~~~~~
./include/net/ip_fib.h:440:45: note: in expansion of macro ‘RT_TOS’
440 | return dscp == inet_dsfield_to_dscp(RT_TOS(fl4->flowi4_tos));
Therefore, cited commit changed linux/in_route.h to include linux/ip.h.
However, as reported by David, this breaks iproute2 compilation due
overlapping definitions between linux/ip.h and
/usr/include/netinet/ip.h:
In file included from ../include/uapi/linux/in_route.h:5,
from iproute.c:19:
../include/uapi/linux/ip.h:25:9: warning: "IPTOS_TOS" redefined
25 | #define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~
In file included from iproute.c:17:
/usr/include/netinet/ip.h:222:9: note: this is the location of the previous definition
222 | #define IPTOS_TOS(tos) ((tos) & IPTOS_TOS_MASK)
Fix by changing include/net/ip_fib.h to include linux/ip.h. Note that
usage of RT_TOS() should not spread further in the kernel due to recent
work in this area.
Fixes: 1fa3314c14c6 ("ipv4: Centralize TOS matching")
Reported-by: David Ahern <dsahern@kernel.org>
Closes: https://lore.kernel.org/netdev/2f5146ff-507d-4cab-a195-b28c0c9e654e@kernel.org/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20240903133554.2807343-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Native PCIe Enclosure Management (NPEM, PCIe r6.1 sec 6.28) allows managing
LEDs in storage enclosures. NPEM is indication oriented and it does not
give direct access to LEDs. Although each indication *could* represent an
individual LED, multiple indications could also be represented as a single,
multi-color LED or a single LED blinking in a specific interval. The
specification leaves that open.
Each enabled indication (capability register bit on) is represented as a
ledclass_dev which can be controlled through sysfs. For every ledclass
device only 2 brightness states are allowed: LED_ON (1) or LED_OFF (0).
This corresponds to the NPEM control register (Indication bit on/off).
Ledclass devices appear in sysfs as child devices (subdirectory) of PCI
device which has an NPEM Extended Capability and indication is enabled in
NPEM capability register. For example, these are LEDs created for pcieport
"10000:02:05.0" on my setup:
leds/
├── 10000:02:05.0:enclosure:fail
├── 10000:02:05.0:enclosure:locate
├── 10000:02:05.0:enclosure:ok
└── 10000:02:05.0:enclosure:rebuild
They can be also found in "/sys/class/leds" directory. The parent PCIe
device domain/bus/device/function address is used to guarantee uniqueness
across leds subsystem.
To enable/disable a "fail" indication, the "brightness" file can be edited:
echo 1 > ./leds/10000:02:05.0:enclosure:fail/brightness
echo 0 > ./leds/10000:02:05.0:enclosure:fail/brightness
PCIe r6.1, sec 7.9.19.2 defines the possible indications.
Multiple indications for same parent PCIe device can conflict and hardware
may update them when processing new request. To avoid issues, driver
refresh all indications by reading back control register.
This driver expects to be the exclusive NPEM extended capability manager.
It waits up to 1 second after imposing new request, it doesn't verify if
controller is busy before write, and it assumes the mutex lock gives
protection from concurrent updates.
If _DSM LED management is available, we assume the platform may be using
NPEM for its own purposes (see PCI Firmware Spec r3.3 sec 4.7), so the
driver does not use NPEM. A future patch will add _DSM support; an info
message notes whether NPEM or _DSM is being used.
NPEM is a PCIe extended capability so it should be registered in
pcie_init_capabilities() but it is not possible due to LED dependency. The
parent pci_device must be added earlier for led_classdev_register() to be
successful. NPEM does not require configuration on kernel side, so it is
safe to register LED devices later.
Link: https://lore.kernel.org/r/20240904104848.23480-3-mariusz.tkaczyk@linux.intel.com
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Now we have everything in place and we can allow idmapped mounts
by setting the FS_ALLOW_IDMAP flag. Notice that real availability
of idmapped mounts will depend on the fuse daemon. Fuse daemon
have to set FUSE_ALLOW_IDMAP flag in the FUSE_INIT reply.
To discuss:
- we enable idmapped mounts support only if "default_permissions" mode is
enabled, because otherwise we would need to deal with UID/GID mappings in
the userspace side OR provide the userspace with idmapped
req->in.h.uid/req->in.h.gid values which is not something that we probably
want to. Idmapped mounts philosophy is not about faking caller uid/gid.
Some extra links and examples:
- libfuse support
https://github.com/mihalicyn/libfuse/commits/idmap_support
- fuse-overlayfs support:
https://github.com/mihalicyn/fuse-overlayfs/commits/idmap_support
- cephfs-fuse conversion example
https://github.com/mihalicyn/ceph/commits/fuse_idmap
- glusterfs conversion example
https://github.com/mihalicyn/glusterfs/commits/fuse_idmap
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add some preparational changes in fuse_get_req/fuse_force_creds
to handle idmappings.
Miklos suggested [1], [2] to change the meaning of in.h.uid/in.h.gid
fields when daemon declares support for idmapped mounts. In a new semantic,
we fill uid/gid values in fuse header with a id-mapped caller uid/gid (for
requests which create new inodes), for all the rest cases we just send -1
to userspace.
No functional changes intended.
Link: https://lore.kernel.org/all/CAJfpegsVY97_5mHSc06mSw79FehFWtoXT=hhTUK_E-Yhr7OAuQ@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAJfpegtHQsEUuFq1k4ZbTD3E1h-GsrN3PWyv7X8cg6sfU_W2Yw@mail.gmail.com/ [2]
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add a regset for POE containing POR_EL0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-21-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch uses zero as timeout marker for those elements that never expire
when the element is created.
If userspace provides no timeout for an element, then the default set
timeout applies. However, if no default set timeout is specified and
timeout flag is set on, then timeout extension is allocated and timeout
is set to zero to allow for future updates.
Use of zero a never timeout marker has been suggested by Phil Sutter.
Note that, in older kernels, it is already possible to define elements
that never expire by declaring a set with the set timeout flag set on
and no global set timeout, in this case, new element with no explicit
timeout never expire do not allocate the timeout extension, hence, they
never expire. This approach makes it complicated to accomodate element
timeout update, because element extensions do not support reallocations.
Therefore, allocate the timeout extension and use the new marker for
this case, but do not expose it to userspace to retain backward
compatibility in the set listing.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.12
Includes a merge of spi-mos-config branch from spi.git that brings
support needed for the AD4000 driver.
Lots of new device support this time including 9 new drivers and substantial
changes to add new support to several more.
New device support
------------------
Given we have a lot of new support, I've subcategorized them:
Substantial changes, or new driver
**********************************
adi,ad4000
- New driver for this high speed ADC.
adi,ad4695
- New driver supporting AD4690, AD4696, AD4697 and AD4698 ADCs.
- Follow up series added triggered buffer support.
adi,ad7380
- Add support for single ended parts, AD7386, ADC7387, AD7388 and -4 variants.
(driver previously only support differential parts).
These variants have an additional front end MUX so only half the channels
can be sampled efficiently.
adi,ad9467
- Refactor and extend driver to support ad9643, ad9449 and ad9652 high speed
ADCs.
adi,adxl380
- New driver for this low power accelerometer.
adi,ltc2664
- New driver supporting LTC2664 and LTC2672 DACs.
microchip,pac1921
- New driver for this power/current monitor chip.
rohm,bh1745
- New driver for this RGBC colour sensor.
rohm,bu27034anuc
- The original bu27034 was canceled before mass production, so the
driver is modified to support the BU27034ANUC which had some significant
differences. DT compatible changed to avoid chance of old driver ever
binding to real hardware.
sciosense,ens210
- New driver for ens210, ens210a, ens211, ens212, ens213a, and ens215
temperature and humidity sensors (all register compatible up to some
conversion time differences)
sensiron,sdp500
- New driver for this differential pressure sensor.
tyhx,hx9023s
- New driver to support this capacitive proximity sensor.
Minor changes to support new devices
************************************
adi,adf4377
- Add support for the single output adf4378.
kionix,kxcjk-1013
- Add support for KX022-1020 accelerometer (binding and ID table only)
liteon,ltrf216a
- Add support for ltr-308. A few minor differences in features set
rockchip,saradc
- Add ID for rk3576-saradc
sensortek,stk3310
- Add ID for stk3013 proximity sensor which (despite documentation) has
an ambient light sensor and is compatible with existing parts.
Documentation updates
---------------------
Generalize ABI docs for shunt resistor attribute
Improve calibscale and calibbias related documentation. A couple of follow
up patches to resolve duplicate documentation that resulted.
New core features
-----------------
backend
- Add option for debugfs - useful for test pattern control
- Use this for both adi-axi-adc and adi-axi-dac
trigger suspend
- Add functions to allow triggers to be suspended. This avoids problems
when a device enters suspend to idle with a sysfs trigger. Use it for now
in the bmi323 only.
New driver features
-------------------
adi,ad7192
- Add option to be a clock provider (+ additional clock config options)
adi,ad7380
- Add documentation for this fairly new driver.
adi,ad9461
- Provide control of test modes and backend validation blocks used
to identify problems (via debugfs)
adi,ad9739
- Add backend debugfs and docs for what is provided via adi-axi-dac
avago,apds9960
- Add proximity and gesture calibration offset control
bosch,bmp280
- Triggered buffer support including adding raw+scale output for sysfs.
liteon,ltr390
- Add configuration of integration time and scale.
stm,dfsdm
- Convert this SD modulator driver to backend framework and add support
for channel scaling + modern channel bindings.
Treewide cleanup
----------------
iio_dev->masklength: Making it private.
- Provide access function to read the core compute channel mask length
and a macro to iterate over elements in the active_scan_mask.
- Enables marking masklength __private preventing drivers from
writing it without triggering a build warning whilst minimizing overhead
in what are typically hot paths.
- Convert all drivers and finally mark it private.
Merge conflicts resolved in drivers applied after this point.
Constify regmap_bus
- These are never modified, so mark them const.
Core cleanup
------------
backend
- A few late breaking bits of feedback (unused variable, error messages)
dma-buffer
- Namespace exports.
core
- Drop unused assignment.
Driver cleanup
--------------
adi,ad4695
- Fixing binding to reflect that common-mode-channel is a scalar.
adi,ad7280a
- Use __free(kfree) to simplify freeing of receive buffer.
adi,ad7606
- Various dt-binding cleanup and improvements.
- Fix oversampling related gpio handling.
- Make polarity of standby gpio match documentation.
- use guard() to simplify lock handling.
adi,ad7768
- Use device_for_each_child_node_scoped() instead of fwnode equivalent.
adi,ad7124
- Reduce SPI transfers by avoiding separate writes to different fields
in the same register.
- Start the ADC in idle mode.
adi,adis
- Drop ifdefs in favor of IS_ENABLED.
adi,admv8818
- Fix wrong ABI docs.
asahi-kasei,ak8975
- Drop a prefix free compatible accidentally added recently.
aspeed,adc
- Use of_property_present() instead of of_find_property() to see if the
property is there or not.
atmel,at91,
- Use __free(kfree) to simplify freeing of channel related array.
bosch,bma400
- Use __free(kfree) to simplify freeing a locally allocated string.
bosch,bmc150
- Add missing mount-matrix binding docs.
bosch,bme680
- Fix read/write to ensure multiple necessary sequential reads without
device configuration change.
- Drop unnecessary type casts and use more appropriate data types.
- Drop some left over ACPI code as ACPI support was removed due to invalid
IDs (and no known users).
- Sort headers consistently.
- Avoid unnecessary duplicate read and redundant read of gas config.
- Use bulk reads to get calibration data.
- Reorder allocation of IIO device to be prior to device init.
- Add remaining read/write buffers to the union used already for all others.
- Tidy up error checks for consistency of style, including dev_err_probe()
- Bring the device startup procedure inline with the vendor code.
- Reorder code so mode forcing is more obvious occurring where needed.
- Tidy up data locality in reading functions so no magic data is stored
in state structures just to get it across function calls.
- Make a local lookup table static to avoid placing it on the stack.
bosch,bmp280
- Fix BME280 regmap to not include registers it doesn't have.
- Wait a little longer after config to allow for maximum possible necessary
wait.
- Reorganize headers.
- Make conversion_time_max array static to avoid placing it on the stack.
maxim,max1363
- Use __free(kfree) to simplify freeing transmission buffer.
microchip,mcp3964
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp3911
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4728
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4922
- Use devm_regulator_get_enable_read_voltage() and devm_* to allow
dropping of explicit remove() callback.
onnn,noa1305
- Various tidy up.
- Provide available scale values.
- Make integration time configurable.
- Fix up integration time look up (/2 error)
ti,dac7311
- Check if spi_setup() succeeded.
ti,tsc2046
- Use __free(kfree) to simplify freeing rx and tx buffers.
- Use devm_regulator_get_enable_read_voltage()
Various minor fixes not called out explicitly.
* tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (250 commits)
drivers:iio:Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
iio: sgp40: retain documentation in driver
iio: ABI: remove duplicate in_resistance_calibbias
dt-bindings: iio: st,stm32-adc: add top-level constraints
iio: ABI: add missing calibbias attributes
iio: ABI: add missing calibscale attributes
iio: ABI: sort calibscale attributes
iio: ABI: document calibscale_available attributes
iio: light: ltr390: Calculate 'counts_per_uvi' dynamically
iio: light: ltr390: Add ALS channel and support for gain and resolution
doc: iio: ad4695: document buffered read
iio: adc: ad4695: implement triggered buffer
iio: proximity: hx9023s: Fix error code in hx9023s_property_get()
iio: light: noa1305: Fix up integration time look up
iio: humidity: Add support for ENS210
dt-bindings: iio: humidity: add ENS210 sensor family
iio: imu: adis16460: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16400: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16480: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16475: drop ifdef around CONFIG_DEBUG_FS
...
|
|
The PG_error bit is now unused; delete it and free up a bit in
page->flags.
Link: https://lkml.kernel.org/r/20240807193528.1865100-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add ability to set per-dentry mount expire timeout to autofs.
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as the
current autofs default).
2) "nounmount", don't expire this mount (same as setting the autofs
timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount).
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map keys
(mounts) for autofs indirect mounts use an expire timeout stored in
the autofs mount super block info. structure and all indirect mounts
use the same expire timeout.
Now I have a request to add the "nounmount" option so I need to add
the per-dentry expire handling to the kernel implementation to do this.
The implementation uses the trailing path component to identify the
mount (and is also used as the autofs map key) which is passed in the
autofs_dev_ioctl structure path field. The expire timeout is passed
in autofs_dev_ioctl timeout field (well, of the timeout union).
If the passed in timeout is equal to -1 the per-dentry timeout and
flag are cleared providing for the "unmount" option. If the timeout
is greater than or equal to 0 the timeout is set to the value and the
flag is also set. If the dentry timeout is 0 the dentry will not expire
by timeout which enables the implementation of the "nounmount" option
for the specific mount. When the dentry timeout is greater than zero it
allows for the implementation of the "utimeout=<seconds>" option.
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20240814090231.963520-1-raven@themaw.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
By default, any recv/read operation that uses provided buffers will
consume at least 1 buffer fully (and maybe more, in case of bundles).
This adds support for incremental consumption, meaning that an
application may add large buffers, and each read/recv will just consume
the part of the buffer that it needs.
For example, let's say an application registers 1MB buffers in a
provided buffer ring, for streaming receives. If it gets a short recv,
then the full 1MB buffer will be consumed and passed back to the
application. With incremental consumption, only the part that was
actually used is consumed, and the buffer remains the current one.
This means that both the application and the kernel needs to keep track
of what the current receive point is. Each recv will still pass back a
buffer ID and the size consumed, the only difference is that before the
next receive would always be the next buffer in the ring. Now the same
buffer ID may return multiple receives, each at an offset into that
buffer from where the previous receive left off. Example:
Application registers a provided buffer ring, and adds two 32K buffers
to the ring.
Buffer1 address: 0x1000000 (buffer ID 0)
Buffer2 address: 0x2000000 (buffer ID 1)
A recv completion is received with the following values:
cqe->res 0x1000 (4k bytes received)
cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0)
and the application now knows that 4096b of data is available at
0x1000000, the start of that buffer, and that more data from this buffer
will be coming. Now the next receive comes in:
cqe->res 0x2010 (8k bytes received)
cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0)
which tells the application that 8k is available where the last
completion left off, at 0x1001000. Next completion is:
cqe->res 0x5000 (20k bytes received)
cqe->flags 0x1 (CQE_F_BUFFER set, buffer ID 0)
and the application now knows that 20k of data is available at
0x1003000, which is where the previous receive ended. CQE_F_BUF_MORE
isn't set, as no more data is available in this buffer ID. The next
completion is then:
cqe->res 0x1000 (4k bytes received)
cqe->flags 0x10001 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 1)
which tells the application that buffer ID 1 is now the current one,
hence there's 4k of valid data at 0x2000000. 0x2001000 will be the next
receive point for this buffer ID.
When a buffer will be reused by future CQE completions,
IORING_CQE_BUF_MORE will be set in cqe->flags. This tells the application
that the kernel isn't done with the buffer yet, and that it should expect
more completions for this buffer ID. Will only be set by provided buffer
rings setup with IOU_PBUF_RING INC, as that's the only type of buffer
that will see multiple consecutive completions for the same buffer ID.
For any other provided buffer type, any completion that passes back
a buffer to the application is final.
Once a buffer has been fully consumed, the buffer ring head is
incremented and the next receive will indicate the next buffer ID in the
CQE cflags.
On the send side, the application can manage how much data is sent from
an existing buffer by setting sqe->len to the desired send length.
An application can request incremental consumption by setting
IOU_PBUF_RING_INC in the provided buffer ring registration. Outside of
that, any provided buffer ring setup and buffer additions is done like
before, no changes there. The only change is in how an application may
see multiple completions for the same buffer ID, hence needing to know
where the next receive will happen.
Note that like existing provided buffer rings, this should not be used
with IOSQE_ASYNC, as both really require the ring to remain locked over
the duration of the buffer selection and the operation completion. It
will consume a buffer otherwise regardless of the size of the IO done.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a need for userspace applications to open HID devices directly.
Use-cases include configuration of gaming mice or direct access to
joystick devices. The latter is currently handled by the uaccess tag in
systemd, other devices include more custom/local configurations or just
sudo.
A better approach is what we already have for evdev devices: give the
application a file descriptor and revoke it when it may no longer access
that device.
This patch is the hidraw equivalent to the EVIOCREVOKE ioctl, see
commit c7dc65737c9a ("Input: evdev - add EVIOCREVOKE ioctl") for full
details.
An MR for systemd-logind has been filed here:
https://github.com/systemd/systemd/pull/33970
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-1-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The fallocate system call takes a mode argument, but that argument
contains a wild mix of exclusive modes and an optional flags.
Replace FALLOC_FL_SUPPORTED_MASK with FALLOC_FL_MODE_MASK, which excludes
the optional flag bit, so that we can use switch statement on the value
to easily enumerate the cases while getting the check for duplicate modes
for free.
To make this (and in the future the file system implementations) more
readable also add a symbolic name for the 0 mode used to allocate blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This adds GENMASK_U128() and __GENMASK_U128() macros using __BITS_PER_U128
and __int128 data types. These macros will be used in providing support for
generating 128 bit masks.
The macros wouldn't work in all assembler flavors for reasons described
in the comments on top of declarations. Enforce it for more by adding
!__ASSEMBLY__ guard.
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Nicolin Chen says:
=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a device for address translation to an MSI location
(including nested cases), practically it is a universal region across all
domains allocated for the IOMMU that defines it.
Currently IOMMUFD core fetches and reserves the region during an attach to
an hwpt_paging. It works with a hwpt_paging-only case, but might not work
with a nested case where a device could directly attach to a hwpt_nested,
bypassing the hwpt_paging attachment.
Move the enforcement forward, to the hwpt_paging allocation function. Then
clean up all the SW_MSI related things in the attach/replace routine.
=========
Based on v6.11-rc5 for dependencies.
* nesting_reserved_regions: (562 commits)
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
Linux 6.11-rc5
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.12-2024-08-26:
amdgpu:
- SDMA devcoredump support
- DCN 4.0.1 updates
- DC SUBVP fixes
- Refactor OPP in DC
- Refactor MMHUBBUB in DC
- DC DML 2.1 updates
- DC FAMS2 updates
- RAS updates
- GFX12 updates
- VCN 4.0.3 updates
- JPEG 4.0.3 updates
- Enable wave kill (soft recovery) for compute queues
- Clean up CP error interrupt handling
- Enable CP bad opcode interrupts
- VCN 4.x fixes
- VCN 5.x fixes
- GPU reset fixes
- Fix vbios embedded EDID size handling
- SMU 14.x updates
- Misc code cleanups and spelling fixes
- VCN devcoredump support
- ISP MFD i2c support
- DC vblank fixes
- GFX 12 fixes
- PSR fixes
- Convert vbios embedded EDID to drm_edid
- DCN 3.5 updates
- DMCUB updates
- Cursor fixes
- Overdrive support for SMU 14.x
- GFX CP padding optimizations
- DCC fixes
- DSC fixes
- Preliminary per queue reset infrastructure
- Initial per queue reset support for GFX 9
- Initial per queue reset support for GFX 7, 8
- DCN 3.2 fixes
- DP MST fixes
- SR-IOV fixes
- GFX 9.4.3/4 devcoredump support
- Add process isolation framework
- Enable process isolation support for GFX 9.4.3/4
- Take IOMMU remapping into account for P2P DMA checks
amdkfd:
- CRIU fixes
- Improved input validation for user queues
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Initial per queue reset support for GFX 9
- Allow users to target recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
UAPI:
- KFD support for targetting queues on recommended SDMA engines
Proposed userspace:
https://github.com/ROCm/ROCR-Runtime/commit/2f588a24065f41c208c3701945e20be746d8faf7
https://github.com/ROCm/ROCR-Runtime/commit/eb30a5bbc7719c6ffcf2d2dd2878bc53a47b3f30
drm/buddy:
- Add start address support for trim function
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826201528.55307-1-alexander.deucher@amd.com
|
|
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Implement and document new pin attributes for providing Embedded SYNC
capabilities to the DPLL subsystem users through a netlink pin-get
do/dump messages. Allow the user to set Embedded SYNC frequency with
pin-set do netlink message.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
