| Age | Commit message (Collapse) | Author |
|---|
|
An atomic write is a write issued with torn-write protection, meaning
that for a power failure or any other hardware failure, all or none of the
data from the write will be stored, but never a mix of old and new data.
Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the
write is to be issued with torn-write prevention, according to special
alignment and length rules.
For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for
iocb->ki_flags field to indicate the same.
A call to statx will give the relevant atomic write info for a file:
- atomic_write_unit_min
- atomic_write_unit_max
- atomic_write_segments_max
Both min and max values must be a power-of-2.
Applications can avail of atomic write feature by ensuring that the total
length of a write is a power-of-2 in size and also sized between
atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications
must ensure that the write is at a naturally-aligned offset in the file
wrt the total write length. The value in atomic_write_segments_max
indicates the upper limit for IOV_ITER iovcnt.
Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the
flag set will have RWF_ATOMIC rejected and not just ignored.
Add a type argument to kiocb_set_rw_flags() to allows reads which have
RWF_ATOMIC set to be rejected.
Helper function generic_atomic_write_valid() can be used by FSes to verify
compliant writes. There we check for iov_iter type is for ubuf, which
implies iovcnt==1 for pwritev2(), which is an initial restriction for
atomic_write_segments_max. Initially the only user will be bdev file
operations write handler. We will rely on the block BIO submission path to
ensure write sizes are compliant for the bdev, so we don't need to check
atomic writes sizes yet.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
jpg: merge into single patch and much rewrite
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the new ISO 15765-2:2024 release the former documentation and comments
have to be reworked. This patch removes the ISO specification version/date
where possible.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Francesco Valla <valla.francesco@gmail.com>
Link: https://lore.kernel.org/all/20240420194746.4885-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
IORING_OP_LISTEN provides the semantic of listen(2) via io_uring. While
this is an essentially synchronous system call, the main point is to
enable a network path to execute fully with io_uring registered and
descriptorless files.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240614163047.31581-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IORING_OP_BIND provides the semantic of bind(2) via io_uring. While
this is an essentially synchronous system call, the main point is to
enable a network path to execute fully with io_uring registered and
descriptorless files.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240614163047.31581-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement a new scheduler class sched_ext (SCX), which allows scheduling
policies to be implemented as BPF programs to achieve the following:
1. Ease of experimentation and exploration: Enabling rapid iteration of new
scheduling policies.
2. Customization: Building application-specific schedulers which implement
policies that are not applicable to general-purpose schedulers.
3. Rapid scheduler deployments: Non-disruptive swap outs of scheduling
policies in production environments.
sched_ext leverages BPF’s struct_ops feature to define a structure which
exports function callbacks and flags to BPF programs that wish to implement
scheduling policies. The struct_ops structure exported by sched_ext is
struct sched_ext_ops, and is conceptually similar to struct sched_class. The
role of sched_ext is to map the complex sched_class callbacks to the more
simple and ergonomic struct sched_ext_ops callbacks.
For more detailed discussion on the motivations and overview, please refer
to the cover letter.
Later patches will also add several example schedulers and documentation.
This patch implements the minimum core framework to enable implementation of
BPF schedulers. Subsequent patches will gradually add functionalities
including safety guarantee mechanisms, nohz and cgroup support.
include/linux/sched/ext.h defines struct sched_ext_ops. With the comment on
top, each operation should be self-explanatory. The followings are worth
noting:
- Both "sched_ext" and its shorthand "scx" are used. If the identifier
already has "sched" in it, "ext" is used; otherwise, "scx".
- In sched_ext_ops, only .name is mandatory. Every operation is optional and
if omitted a simple but functional default behavior is provided.
- A new policy constant SCHED_EXT is added and a task can select sched_ext
by invoking sched_setscheduler(2) with the new policy constant. However,
if the BPF scheduler is not loaded, SCHED_EXT is the same as SCHED_NORMAL
and the task is scheduled by CFS. When the BPF scheduler is loaded, all
tasks which have the SCHED_EXT policy are switched to sched_ext.
- To bridge the workflow imbalance between the scheduler core and
sched_ext_ops callbacks, sched_ext uses simple FIFOs called dispatch
queues (dsq's). By default, there is one global dsq (SCX_DSQ_GLOBAL), and
one local per-CPU dsq (SCX_DSQ_LOCAL). SCX_DSQ_GLOBAL is provided for
convenience and need not be used by a scheduler that doesn't require it.
SCX_DSQ_LOCAL is the per-CPU FIFO that sched_ext pulls from when putting
the next task on the CPU. The BPF scheduler can manage an arbitrary number
of dsq's using scx_bpf_create_dsq() and scx_bpf_destroy_dsq().
- sched_ext guarantees system integrity no matter what the BPF scheduler
does. To enable this, each task's ownership is tracked through
p->scx.ops_state and all tasks are put on scx_tasks list. The disable path
can always recover and revert all tasks back to CFS. See p->scx.ops_state
and scx_tasks.
- A task is not tied to its rq while enqueued. This decouples CPU selection
from queueing and allows sharing a scheduling queue across an arbitrary
subset of CPUs. This adds some complexities as a task may need to be
bounced between rq's right before it starts executing. See
dispatch_to_local_dsq() and move_task_to_local_dsq().
- One complication that arises from the above weak association between task
and rq is that synchronizing with dequeue() gets complicated as dequeue()
may happen anytime while the task is enqueued and the dispatch path might
need to release the rq lock to transfer the task. Solving this requires a
bit of complexity. See the logic around p->scx.sticky_cpu and
p->scx.ops_qseq.
- Both enable and disable paths are a bit complicated. The enable path
switches all tasks without blocking to avoid issues which can arise from
partially switched states (e.g. the switching task itself being starved).
The disable path can't trust the BPF scheduler at all, so it also has to
guarantee forward progress without blocking. See scx_ops_enable() and
scx_ops_disable_workfn().
- When sched_ext is disabled, static_branches are used to shut down the
entry points from hot paths.
v7: - scx_ops_bypass() was incorrectly and unnecessarily trying to grab
scx_ops_enable_mutex which can lead to deadlocks in the disable path.
Fixed.
- Fixed TASK_DEAD handling bug in scx_ops_enable() path which could lead
to use-after-free.
- Consolidated per-cpu variable usages and other cleanups.
v6: - SCX_NR_ONLINE_OPS replaced with SCX_OPI_*_BEGIN/END so that multiple
groups can be expressed. Later CPU hotplug operations are put into
their own group.
- SCX_OPS_DISABLING state is replaced with the new bypass mechanism
which allows temporarily putting the system into simple FIFO
scheduling mode bypassing the BPF scheduler. In addition to the shut
down path, this will also be used to isolate the BPF scheduler across
PM events. Enabling and disabling the bypass mode requires iterating
all runnable tasks. rq->scx.runnable_list addition is moved from the
later watchdog patch.
- ops.prep_enable() is replaced with ops.init_task() and
ops.enable/disable() are now called whenever the task enters and
leaves sched_ext instead of when the task becomes schedulable on
sched_ext and stops being so. A new operation - ops.exit_task() - is
called when the task stops being schedulable on sched_ext.
- scx_bpf_dispatch() can now be called from ops.select_cpu() too. This
removes the need for communicating local dispatch decision made by
ops.select_cpu() to ops.enqueue() via per-task storage.
SCX_KF_SELECT_CPU is added to support the change.
- SCX_TASK_ENQ_LOCAL which told the BPF scheudler that
scx_select_cpu_dfl() wants the task to be dispatched to the local DSQ
was removed. Instead, scx_bpf_select_cpu_dfl() now dispatches directly
if it finds a suitable idle CPU. If such behavior is not desired,
users can use scx_bpf_select_cpu_dfl() which returns the verdict in a
bool out param.
- scx_select_cpu_dfl() was mishandling WAKE_SYNC and could end up
queueing many tasks on a local DSQ which makes tasks to execute in
order while other CPUs stay idle which made some hackbench numbers
really bad. Fixed.
- The current state of sched_ext can now be monitored through files
under /sys/sched_ext instead of /sys/kernel/debug/sched/ext. This is
to enable monitoring on kernels which don't enable debugfs.
- sched_ext wasn't telling BPF that ops.dispatch()'s @prev argument may
be NULL and a BPF scheduler which derefs the pointer without checking
could crash the kernel. Tell BPF. This is currently a bit ugly. A
better way to annotate this is expected in the future.
- scx_exit_info updated to carry pointers to message buffers instead of
embedding them directly. This decouples buffer sizes from API so that
they can be changed without breaking compatibility.
- exit_code added to scx_exit_info. This is used to indicate different
exit conditions on non-error exits and will be used to handle e.g. CPU
hotplugs.
- The patch "sched_ext: Allow BPF schedulers to switch all eligible
tasks into sched_ext" is folded in and the interface is changed so
that partial switching is indicated with a new ops flag
%SCX_OPS_SWITCH_PARTIAL. This makes scx_bpf_switch_all() unnecessasry
and in turn SCX_KF_INIT. ops.init() is now called with
SCX_KF_SLEEPABLE.
- Code reorganized so that only the parts necessary to integrate with
the rest of the kernel are in the header files.
- Changes to reflect the BPF and other kernel changes including the
addition of bpf_sched_ext_ops.cfi_stubs.
v5: - To accommodate 32bit configs, p->scx.ops_state is now atomic_long_t
instead of atomic64_t and scx_dsp_buf_ent.qseq which uses
load_acquire/store_release is now unsigned long instead of u64.
- Fix the bug where bpf_scx_btf_struct_access() was allowing write
access to arbitrary fields.
- Distinguish kfuncs which can be called from any sched_ext ops and from
anywhere. e.g. scx_bpf_pick_idle_cpu() can now be called only from
sched_ext ops.
- Rename "type" to "kind" in scx_exit_info to make it easier to use on
languages in which "type" is a reserved keyword.
- Since cff9b2332ab7 ("kernel/sched: Modify initial boot task idle
setup"), PF_IDLE is not set on idle tasks which haven't been online
yet which made scx_task_iter_next_filtered() include those idle tasks
in iterations leading to oopses. Update scx_task_iter_next_filtered()
to directly test p->sched_class against idle_sched_class instead of
using is_idle_task() which tests PF_IDLE.
- Other updates to match upstream changes such as adding const to
set_cpumask() param and renaming check_preempt_curr() to
wakeup_preempt().
v4: - SCHED_CHANGE_BLOCK replaced with the previous
sched_deq_and_put_task()/sched_enq_and_set_tsak() pair. This is
because upstream is adaopting a different generic cleanup mechanism.
Once that lands, the code will be adapted accordingly.
- task_on_scx() used to test whether a task should be switched into SCX,
which is confusing. Renamed to task_should_scx(). task_on_scx() now
tests whether a task is currently on SCX.
- scx_has_idle_cpus is barely used anymore and replaced with direct
check on the idle cpumask.
- SCX_PICK_IDLE_CORE added and scx_pick_idle_cpu() improved to prefer
fully idle cores.
- ops.enable() now sees up-to-date p->scx.weight value.
- ttwu_queue path is disabled for tasks on SCX to avoid confusing BPF
schedulers expecting ->select_cpu() call.
- Use cpu_smt_mask() instead of topology_sibling_cpumask() like the rest
of the scheduler.
v3: - ops.set_weight() added to allow BPF schedulers to track weight changes
without polling p->scx.weight.
- move_task_to_local_dsq() was losing SCX-specific enq_flags when
enqueueing the task on the target dsq because it goes through
activate_task() which loses the upper 32bit of the flags. Carry the
flags through rq->scx.extra_enq_flags.
- scx_bpf_dispatch(), scx_bpf_pick_idle_cpu(), scx_bpf_task_running()
and scx_bpf_task_cpu() now use the new KF_RCU instead of
KF_TRUSTED_ARGS to make it easier for BPF schedulers to call them.
- The kfunc helper access control mechanism implemented through
sched_ext_entity.kf_mask is improved. Now SCX_CALL_OP*() is always
used when invoking scx_ops operations.
v2: - balance_scx_on_up() is dropped. Instead, on UP, balance_scx() is
called from put_prev_taks_scx() and pick_next_task_scx() as necessary.
To determine whether balance_scx() should be called from
put_prev_task_scx(), SCX_TASK_DEQD_FOR_SLEEP flag is added. See the
comment in put_prev_task_scx() for details.
- sched_deq_and_put_task() / sched_enq_and_set_task() sequences replaced
with SCHED_CHANGE_BLOCK().
- Unused all_dsqs list removed. This was a left-over from previous
iterations.
- p->scx.kf_mask is added to track and enforce which kfunc helpers are
allowed. Also, init/exit sequences are updated to make some kfuncs
always safe to call regardless of the current BPF scheduler state.
Combined, this should make all the kfuncs safe.
- BPF now supports sleepable struct_ops operations. Hacky workaround
removed and operations and kfunc helpers are tagged appropriately.
- BPF now supports bitmask / cpumask helpers. scx_bpf_get_idle_cpumask()
and friends are added so that BPF schedulers can use the idle masks
with the generic helpers. This replaces the hacky kfunc helpers added
by a separate patch in V1.
- CONFIG_SCHED_CLASS_EXT can no longer be enabled if SCHED_CORE is
enabled. This restriction will be removed by a later patch which adds
core-sched support.
- Add MAINTAINERS entries and other misc changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Co-authored-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Cc: Andrea Righi <andrea.righi@canonical.com>
|
|
Ensure that any new KVM code that references immediate_exit gets extra
scrutiny by renaming it to immediate_exit__unsafe in kernel code.
All fields in struct kvm_run are subject to TOCTOU races since they are
mapped into userspace, which may be malicious or buggy. To protect KVM,
introduces a new macro that appends __unsafe to select field names in
struct kvm_run, hinting to developers and reviewers that accessing such
fields must be done carefully.
Apply the new macro to immediate_exit, since userspace can make
immediate_exit inconsistent with vcpu->wants_to_run, i.e. accessing
immediate_exit directly could lead to unexpected bugs in the future.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-3-dmatlack@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
This patch allows to create smc socket via AF_INET,
similar to the following code,
/* create v4 smc sock */
v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
/* create v6 smc sock */
v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
There are several reasons why we believe it is appropriate here:
1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
address. There is no AF_SMC address at all.
2. Create smc socket in the AF_INET(6) path, which allows us to reuse
the infrastructure of AF_INET(6) path, such as common ebpf hooks.
Otherwise, smc have to implement it again in AF_SMC path.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add special flag to validate that TC BPF program properly updates
checksum information in skb.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240606145851.229116-1-vadfed@meta.com
|
|
Add a regulatory flag to allow VLP AP operation even on
channels otherwise marked NO_IR, which may be possible
in some regulatory domains/countries.
Note that this requires checking also when the beacon is
changed, since that may change the regulatory power type.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Misc:
- Restore debugfs behavior of ignoring unknown mount options
- Fix kernel doc for netfs_wait_for_oustanding_io()
- Fix struct statx comment after new addition for this cycle
- Fix a check in find_next_fd()
iomap:
- Fix data zeroing behavior when an extent spans the block that
contains i_size
- Restore i_size increasing in iomap_write_end() for now to avoid
stale data exposure on xfs with a realtime device
Cachefiles:
- Remove unneeded fdtable.h include
- Improve trace output for cachefiles_obj_{get,put}_ondemand_fd()
- Remove requests from the request list to prevent accessing already
freed requests
- Fix UAF when issuing restore command while the daemon is still
alive by adding an additional reference count to requests
- Fix UAF by grabbing a reference during xarray lookup with xa_lock()
held
- Simplify error handling in cachefiles_ondemand_daemon_read()
- Add consistency checks read and open requests to avoid crashes
- Add a spinlock to protect ondemand_id variable which is used to
determine whether an anonymous cachefiles fd has already been
closed
- Make on-demand reads killable allowing to handle broken cachefiles
daemon better
- Flush all requests after the kernel has been marked dead via
CACHEFILES_DEAD to avoid hung-tasks
- Ensure that closed requests are marked as such to avoid reusing
them with a reopen request
- Defer fd_install() until after copy_to_user() succeeded and thereby
get rid of having to use close_fd()
- Ensure that anonymous cachefiles on-demand fds are reused while
they are valid to avoid pinning already freed cookies"
* tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix iomap_adjust_read_range for plen calculation
iomap: keep on increasing i_size in iomap_write_end()
cachefiles: remove unneeded include of <linux/fdtable.h>
fs/file: fix the check in find_next_fd()
cachefiles: make on-demand read killable
cachefiles: flush all requests after setting CACHEFILES_DEAD
cachefiles: Set object to close if ondemand_id < 0 in copen
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
cachefiles: never get a new anonymous fd if ondemand_id is valid
cachefiles: add spin_lock for cachefiles_ondemand_info
cachefiles: add consistency check for copen/cread
cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
cachefiles: remove requests from xarray during flushing requests
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
statx: Update offset commentary for struct statx
netfs: fix kernel doc for nets_wait_for_outstanding_io()
debugfs: continue to ignore unknown mount options
|
|
Introduce a new external lockspace flag DLM_LSFL_SOFTIRQ_SAFE. A
lockspace user will set this flag if it can handle dlm running the
callback functions from softirq context. When not set, dlm will
continue to run callback functions from the dlm_callback workqueue.
The new lockspace flag cannot be used for user space lockspaces, so
a uapi placeholder definition is used for the new flag value.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
When a vCPU is interrupted by a signal while running a nested guest,
KVM will exit to userspace with L2 state. However, userspace has no
way to know whether it sees L1 or L2 state (besides calling
KVM_GET_STATS_FD, which does not have a stable ABI).
This causes multiple problems:
The simplest one is L2 state corruption when userspace marks the sregs
as dirty. See this mailing list thread [1] for a complete discussion.
Another problem is that if userspace decides to continue by emulating
instructions, it will unknowingly emulate with L2 state as if L1
doesn't exist, which can be considered a weird guest escape.
Introduce a new flag, KVM_RUN_X86_GUEST_MODE, in the kvm_run data
structure, which is set when the vCPU exited while running a nested
guest. Also introduce a new capability, KVM_CAP_X86_GUEST_MODE, to
advertise the functionality to userspace.
[1] https://lore.kernel.org/kvm/20240416123558.212040-1-julian.stecklina@cyberus-technology.de/T/#m280aadcb2e10ae02c191a7dc4ed4b711a74b1f55
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Link: https://lore.kernel.org/r/20240508132502.184428-1-julian.stecklina@cyberus-technology.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.11-2024-06-07:
amdgpu:
- DCN 4.0.x support
- DCN 3.5 updates
- GC 12.0 support
- DP MST fixes
- Cursor fixes
- MES11 updates
- MMHUB 4.1 support
- DML2 Updates
- DCN 3.1.5 fixes
- IPS fixes
- Various code cleanups
- GMC 12.0 support
- SDMA 7.0 support
- SMU 13 updates
- SR-IOV fixes
- VCN 5.x fixes
- MES12 support
- SMU 14.x updates
- Devcoredump improvements
- Fixes for HDP flush on platforms with >4k pages
- GC 9.4.3 fixes
- RAS ACA updates
- Silence UBSAN flex array warnings
- MMHUB 3.3 updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
UAPI:
- GFX12 modifier and DCC support
Proposed Mesa changes:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29510
- KFD GFX ALU exceptions
Proposed ROCdebugger changes:
https://github.com/ROCm/ROCdbgapi/commit/08c760622b6601abf906f75abbc5e21d9fd425df
https://github.com/ROCm/ROCgdb/commit/944fe1c1414a68700414e86e32273b6bfa62ba6f
- KFD Contiguous VRAM allocation flag
Proposed ROCr/HIP changes:
https://github.com/ROCm/ROCT-Thunk-Interface/commit/f7b4a269914a3ab4f1e2453c2879adb97b5cc9e5
https://github.com/ROCm/ROCR-Runtime/pull/214/commits/26e8530d05a775872cb06dde6693db72be0c454a
https://github.com/ROCm/clr/commit/1d48f2a1ab38b632919c4b7274899b3faf4279ff
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607195900.902537-1-alexander.deucher@amd.com
|
|
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
|
|
HUTRR94 added support for a new usage titled "System Do Not Disturb"
which toggles a system-wide Do Not Disturb setting. This commit simply
adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-gUHE70s7wCAoB@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
HUTRR116 added support for a new usage titled "System Accessibility
Binding" which toggles a system-wide bound accessibility UI or command.
This commit simply adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-e97O9nvudco5z@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
491aee894a08 ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391dc ("net: use unrcu_pointer() helper")
b01e1c030770 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add KVM_CAP_X86_APIC_BUS_CYCLES_NS capability to configure the APIC
bus clock frequency for APIC timer emulation.
Allow KVM_ENABLE_CAPABILITY(KVM_CAP_X86_APIC_BUS_CYCLES_NS) to set the
frequency in nanoseconds. When using this capability, the user space
VMM should configure CPUID leaf 0x15 to advertise the frequency.
Vishal reported that the TDX guest kernel expects a 25MHz APIC bus
frequency but ends up getting interrupts at a significantly higher rate.
The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.
In addition, per Intel SDM:
"The APIC timer frequency will be the processor’s bus clock or core
crystal clock frequency (when TSC/core crystal clock ratio is
enumerated in CPUID leaf 0x15) divided by the value specified in
the divide configuration register."
The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.
The KVM doesn't enumerate CPUID leaf 0x15 to the guest unless the user
space VMM sets it using KVM_SET_CPUID. If the CPUID leaf 0x15 is
enumerated, the guest kernel uses it as the APIC bus frequency. If not,
the guest kernel measures the frequency based on other known timers like
the ACPI timer or the legacy PIT. As reported by Vishal the TDX guest
kernel expects a 25MHz timer frequency but gets timer interrupt more
frequently due to the 1GHz frequency used by KVM.
To ensure that the guest doesn't have a conflicting view of the APIC bus
frequency, allow the userspace to tell KVM to use the same frequency that
TDX mandates instead of the default 1Ghz.
Reported-by: Vishal Annapurve <vannapurve@google.com>
Closes: https://lore.kernel.org/lkml/20231006011255.4163884-1-vannapurve@google.com
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/6748a4c12269e756f0c48680da8ccc5367c31ce7.1714081726.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
dma_heap_allocation_data defines the UAPI as follows:
struct dma_heap_allocation_data {
__u64 len;
__u32 fd;
__u32 fd_flags;
__u64 heap_flags;
};
However, dma_heap_buffer_alloc() casts both fd_flags and heap_flags
into unsigned int. We're inconsistent with types in the non UAPI
arguments. This patch fixes it.
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605012605.5341-1-21cnbao@gmail.com
|
|
extend cls_flower to match TUNNEL_FLAGS_PRESENT bits in tunnel metadata.
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On an Amiga 1200 equipped with a Warp1260 accelerator, an interrupt
storm coming from the accelerator board causes the machine to crash in
local_irq_enable() or auto_irq_enable(). Disabling interrupts for the
Warp1260 in amiga_parse_bootinfo() fixes the problem.
Link: https://lore.kernel.org/r/ZkjwzVwYeQtyAPrL@amaterasu.local
Cc: stable <stable@kernel.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240601153254.186225-1-p.pisati@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
|
|
This reverts commit 8c467f3300591a206fa8dcc6988d768910799872.
Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Reported-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca
Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org
Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent commit 0cfe71f45f42 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f42 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In commit 2a82bb02941f ("statx: stx_subvol"), a new member was added to
struct statx, but the offset comment was not correct. Update it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240529081725.3769290-1-john.g.garry@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-28
We've added 23 non-merge commits during the last 11 day(s) which contain
a total of 45 files changed, 696 insertions(+), 277 deletions(-).
The main changes are:
1) Rename skb's mono_delivery_time to tstamp_type for extensibility
and add SKB_CLOCK_TAI type support to bpf_skb_set_tstamp(),
from Abhishek Chauhan.
2) Add netfilter CT zone ID and direction to bpf_ct_opts so that arbitrary
CT zones can be used from XDP/tc BPF netfilter CT helper functions,
from Brad Cowie.
3) Several tweaks to the instruction-set.rst IETF doc to address
the Last Call review comments, from Dave Thaler.
4) Small batch of riscv64 BPF JIT optimizations in order to emit more
compressed instructions to the JITed image for better icache efficiency,
from Xiao Wang.
5) Sort bpftool C dump output from BTF, aiming to simplify vmlinux.h
diffing and forcing more natural type definitions ordering,
from Mykyta Yatsenko.
6) Use DEV_STATS_INC() macro in BPF redirect helpers to silence
a syzbot/KCSAN race report for the tx_errors counter,
from Jiang Yunshui.
7) Un-constify bpf_func_info in bpftool to fix compilation with LLVM 17+
which started treating const structs as constants and thus breaking
full BTF program name resolution, from Ivan Babrou.
8) Fix up BPF program numbers in test_sockmap selftest in order to reduce
some of the test-internal array sizes, from Geliang Tang.
9) Small cleanup in Makefile.btf script to use test-ge check for v1.25-only
pahole, from Alan Maguire.
10) Fix bpftool's make dependencies for vmlinux.h in order to avoid needless
rebuilds in some corner cases, from Artem Savkov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
bpf, net: Use DEV_STAT_INC()
bpf, docs: Fix instruction.rst indentation
bpf, docs: Clarify call local offset
bpf, docs: Add table captions
bpf, docs: clarify sign extension of 64-bit use of 32-bit imm
bpf, docs: Use RFC 2119 language for ISA requirements
bpf, docs: Move sentence about returning R0 to abi.rst
bpf: constify member bpf_sysctl_kern:: Table
riscv, bpf: Try RVC for reg move within BPF_CMPXCHG JIT
riscv, bpf: Use STACK_ALIGN macro for size rounding up
riscv, bpf: Optimize zextw insn with Zba extension
selftests/bpf: Handle forwarding of UDP CLOCK_TAI packets
net: Add additional bit to support clockid_t timestamp type
net: Rename mono_delivery_time to tstamp_type for scalabilty
selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
net: netfilter: Make ct zone opts configurable for bpf ct helpers
selftests/bpf: Fix prog numbers in test_sockmap
bpf: Remove unused variable "prev_state"
bpftool: Un-const bpf_func_info to fix it for llvm 17 and newer
bpf: Fix order of args in call to bpf_map_kvcalloc
...
====================
Link: https://lore.kernel.org/r/20240528105924.30905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
72 | ev_type &= PROC_EVENT_ALL;
| ^
| |
| unsigned int
Signed-off-by: Matt Jan <zoo868e@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tstamp_type is now set based on actual clockid_t compressed
into 2 bits.
To make the design scalable for future needs this commit bring in
the change to extend the tstamp_type:1 to tstamp_type:2 to support
other clockid_t timestamp.
We now support CLOCK_TAI as part of tstamp_type as part of this
commit with existing support CLOCK_MONOTONIC and CLOCK_REALTIME.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-3-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
|
|
With virtio-mem, primarily hibernation is problematic: as the machine shuts
down, the virtio-mem device loses its state. Powering the machine back up
is like losing a bunch of DIMMs. While there would be ways to add limited
support, suspend+resume is more commonly used for VMs and "easier" to
support cleanly.
s2idle can be supported without any device dependencies. Similarly, one
would expect suspend-to-ram (i.e., S3) to work out of the box. However,
QEMU currently unplugs all device memory when resuming the VM, using a
cold reset on the "wakeup" path. In order to support S3, we need a feature
flag for the device to tell us if memory remains plugged when waking up. In
the future, QEMU will implement this feature.
So let's always support s2idle and support S3 with plugged memory only if
the device indicates support. Block hibernation early using the PM
notifier.
Trying to hibernate now fails early:
# echo disk > /sys/power/state
[ 26.455369] PM: hibernation: hibernation entry
[ 26.458271] virtio_mem virtio0: hibernation is not supported.
[ 26.462498] PM: hibernation: hibernation exit
-bash: echo: write error: Operation not permitted
s2idle works even without the new feature bit:
# echo s2idle > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 52.083725] PM: suspend entry (s2idle)
[ 52.095950] Filesystems sync: 0.010 seconds
[ 52.101493] Freezing user space processes
[ 52.104213] Freezing user space processes completed (elapsed 0.001 seconds)
[ 52.106520] OOM killer disabled.
[ 52.107655] Freezing remaining freezable tasks
[ 52.110880] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 52.113296] printk: Suspending console(s) (use no_console_suspend to debug)
S3 does not work without the feature bit when memory is plugged:
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 32.788281] PM: suspend entry (deep)
[ 32.816630] Filesystems sync: 0.027 seconds
[ 32.820029] Freezing user space processes
[ 32.823870] Freezing user space processes completed (elapsed 0.001 seconds)
[ 32.827756] OOM killer disabled.
[ 32.829608] Freezing remaining freezable tasks
[ 32.833842] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 32.837953] printk: Suspending console(s) (use no_console_suspend to debug)
[ 32.916172] virtio_mem virtio0: suspend+resume with plugged memory is not supported
[ 32.916181] virtio-pci 0000:00:02.0: PM: pci_pm_suspend(): virtio_pci_freeze+0x0/0x50 returns -1
[ 32.916197] virtio-pci 0000:00:02.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -1
[ 32.916210] virtio-pci 0000:00:02.0: PM: failed to suspend async: error -1
But S3 works with the new feature bit when memory is plugged (patched
QEMU):
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 33.983694] PM: suspend entry (deep)
[ 34.009828] Filesystems sync: 0.024 seconds
[ 34.013589] Freezing user space processes
[ 34.016722] Freezing user space processes completed (elapsed 0.001 seconds)
[ 34.019092] OOM killer disabled.
[ 34.020291] Freezing remaining freezable tasks
[ 34.023549] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 34.026090] printk: Suspending console(s) (use no_console_suspend to debug)
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240318120645.105664-1-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
Pull bcachefs updates from Kent Overstreet:
- More safety fixes, primarily found by syzbot
- Run the upgrade/downgrade paths in nochnages mode. Nochanges mode is
primarily for testing fsck/recovery in dry run mode, so it shouldn't
change anything besides disabling writes and holding dirty metadata
in memory.
The idea here was to reduce the amount of activity if we can't write
anything out, so that bringing up a filesystem in "super ro" mode
would be more lilkely to work for data recovery - but norecovery is
the correct option for this.
- btree_trans->locked; we now track whether a btree_trans has any btree
nodes locked, and this is used for improved assertions related to
trans_unlock() and trans_relock(). We'll also be using it for
improving how we work with lockdep in the future: we don't want
lockdep to be tracking individual btree node locks because we take
too many for lockdep to track, and it's not necessary since we have a
cycle detector.
- Trigger improvements that are prep work for online fsck
- BTREE_TRIGGER_check_repair; this regularizes how we do some repair
work for extents that goes with running triggers in fsck, and fixes
some subtle issues with transaction restarts there.
- bch2_snapshot_equiv() has now been ripped out of fsck.c; snapshot
equivalence classes are for when snapshot deletion leaves behind
redundant snapshot nodes, but snapshot deletion now cleans this up
right away, so the abstraction doesn't need to leak.
- Improvements to how we resume writing to the journal in recovery. The
code for picking the new place to write when reading the journal is
greatly simplified and we also store the position in the superblock
for when we don't read the journal; this means that we preserve more
of the journal for list_journal debugging.
- Improvements to sysfs btree_cache and btree_node_cache, for debugging
memory reclaim.
- We now detect when we've blocked for 10 seconds on the allocator in
the write path and dump some useful info.
- Safety fixes for devices references: this is a big series that
changes almost all device lookups to properly check if the device
exists and take a reference to it.
Previously we assumed that if a bkey exists that references a device
then the device must exist, and this was enforced in .invalid
methods, but this was incorrect because it meant device removal
relied on accounting being correct to not leave keys pointing to
invalid devices, and that's not something we can assume.
Getting the "pointer to invalid device" checks out of our .invalid()
methods fixes some long standing device removal bugs; the only
outstanding bug with device removal now is a race between the discard
path and deleting alloc info, which should be easily fixed.
- The allocator now prefers not to expand the new
member_info.btree_allocated bitmap, meaning if repair ever requires
scanning for btree nodes (because of a corrupt interior nodes) we
won't have to scan the whole device(s).
- New coding style document, which among other things talks about the
correct usage of assertions
* tag 'bcachefs-2024-05-19' of https://evilpiepirate.org/git/bcachefs: (155 commits)
bcachefs: add no_invalid_checks flag
bcachefs: add counters for failed shrinker reclaim
bcachefs: Fix sb_field_downgrade validation
bcachefs: Plumb bch_validate_flags to sb_field_ops.validate()
bcachefs: s/bkey_invalid_flags/bch_validate_flags
bcachefs: fsync() should not return -EROFS
bcachefs: Invalid devices are now checked for by fsck, not .invalid methods
bcachefs: kill bch2_dev_bkey_exists() in bch2_check_fix_ptrs()
bcachefs: kill bch2_dev_bkey_exists() in bch2_read_endio()
bcachefs: bch2_dev_get_ioref() checks for device not present
bcachefs: bch2_dev_get_ioref2(); io_read.c
bcachefs: bch2_dev_get_ioref2(); debug.c
bcachefs: bch2_dev_get_ioref2(); journal_io.c
bcachefs: bch2_dev_get_ioref2(); io_write.c
bcachefs: bch2_dev_get_ioref2(); btree_io.c
bcachefs: bch2_dev_get_ioref2(); backpointers.c
bcachefs: bch2_dev_get_ioref2(); alloc_background.c
bcachefs: for_each_bset() declares loop iter
bcachefs: Move BCACHEFS_STATFS_MAGIC value to UAPI magic.h
bcachefs: Improve sysfs internal/btree_cache
...
|
|
Pull nfsd updates from Chuck Lever:
"This is a light release containing mostly optimizations, code clean-
ups, and minor bug fixes. This development cycle has focused on non-
upstream kernel work:
1. Continuing to build upstream CI for NFSD, based on kdevops
2. Backporting NFSD filecache-related fixes to selected LTS kernels
One notable new feature in v6.10 NFSD is the addition of a new netlink
protocol dedicated to configuring NFSD. A new user space tool,
nfsdctl, is to be added to nfs-utils. Lots more to come here.
As always I am very grateful to NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (29 commits)
NFSD: Force all NFSv4.2 COPY requests to be synchronous
SUNRPC: Fix gss_free_in_token_pages()
NFS/knfsd: Remove the invalid NFS error 'NFSERR_OPNOTSUPP'
knfsd: LOOKUP can return an illegal error value
nfsd: set security label during create operations
NFSD: Add COPY status code to OFFLOAD_STATUS response
NFSD: Record status of async copy operation in struct nfsd4_copy
SUNRPC: Remove comment for sp_lock
NFSD: add listener-{set,get} netlink command
SUNRPC: add a new svc_find_listener helper
SUNRPC: introduce svc_xprt_create_from_sa utility routine
NFSD: add write_version to netlink command
NFSD: convert write_threads to netlink command
NFSD: allow callers to pass in scope string to nfsd_svc
NFSD: move nfsd_mutex handling into nfsd_svc callers
lockd: host: Remove unnecessary statements＇host = NULL;＇
nfsd: don't create nfsv4recoverydir in nfsdfs when not used.
nfsd: optimise recalculate_deny_mode() for a common case
nfsd: add tracepoint in mark_client_expired_locked
nfsd: new tracepoint for check_slot_seqid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings ioctl control to Landlock, contributed by Günther Noack.
This also adds him as a Landlock reviewer, and fixes an issue in the
sample"
* tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
MAINTAINERS: Add Günther Noack as Landlock reviewer
fs/ioctl: Add a comment to keep the logic in sync with LSM policies
MAINTAINERS: Notify Landlock maintainers about changes to fs/ioctl.c
landlock: Document IOCTL support
samples/landlock: Add support for LANDLOCK_ACCESS_FS_IOCTL_DEV
selftests/landlock: Exhaustive test for the IOCTL allow-list
selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets
selftests/landlock: Test IOCTLs on named pipes
selftests/landlock: Test ioctl(2) and ftruncate(2) with open(O_PATH)
selftests/landlock: Test IOCTL with memfds
selftests/landlock: Test IOCTL support
landlock: Add IOCTL access right for character and block devices
samples/landlock: Fix incorrect free in populate_ruleset_net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing ring buffer updates from Steven Rostedt:
"Add ring_buffer memory mappings.
The tracing ring buffer was created based on being mostly used with
the splice system call. It is broken up into page ordered sub-buffers
and the reader swaps a new sub-buffer with an existing sub-buffer
that's part of the write buffer. It then has total access to the
swapped out sub-buffer and can do copyless movements of the memory
into other mediums (file system, network, etc).
The buffer is great for passing around the ring buffer contents in the
kernel, but is not so good for when the consumer is the user space
task itself.
A new interface is added that allows user space to memory map the ring
buffer. It will get all the write sub-buffers as well as reader
sub-buffer (that is not written to). It can send an ioctl to change
which sub-buffer is the new reader sub-buffer.
The ring buffer is read only to user space. It only needs to call the
ioctl when it is finished with a sub-buffer and needs a new sub-buffer
that the writer will not write over.
A self test program was also created for testing and can be used as an
example for the interface to user space. The libtracefs (external to
the kernel) also has code that interacts with this, although it is
disabled until the interface is in a official release. It can be
enabled by compiling the library with a special flag. This was used
for testing applications that perform better with the buffer being
mapped.
Memory mapped buffers have limitations. The main one is that it can
not be used with the snapshot logic. If the buffer is mapped,
snapshots will be disabled. If any logic is set to trigger snapshots
on a buffer, that buffer will not be allowed to be mapped"
* tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Add cast to unsigned long addr passed to virt_to_page()
ring-buffer: Have mmapped ring buffer keep track of missed events
ring-buffer/selftest: Add ring-buffer mapping test
Documentation: tracing: Add ring-buffer mapping
tracing: Allow user-space mapping of the ring-buffer
ring-buffer: Introducing ring-buffer mapping functions
ring-buffer: Allocate sub-buffers with __GFP_COMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
|
|
- Add support for DOE Discovery version 2 (Alexey Kardashevskiy)
* pci/doe:
PCI/DOE: Support discovery version 2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Three CXL mailbox passthrough commands are added to support the
populating and clearing of vendor debug logs:
- Get Log Capabilities
- Get Supported Log Sub-List Commands
- Clear Log
- Add support of Device Phyiscal Address (DPA) to Host Physical Address
(HPA) translation for CXL events of cxl_dram and cxl_general media.
This allows user space to figure out which CXL region the event
occured via trace event.
- Connect CXL to CPER reporting.
If a device is configured for firmware first, CXL event records are
not sent directly to the host. Those records are reported through EFI
Common Platform Error Records (CPER). Add support to route the CPER
records through the CXL sub-system in order to provide DPA to HPA
translation and also event decoding and tracing. This is useful for
users to determine which system issues may correspond to specific
hardware events.
- A number of misc cleanups and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
* tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl/cper: Remove duplicated GUID defines
cxl/cper: Fix non-ACPI-APEI-GHES build
cxl/pci: Process CPER events
acpi/ghes: Process CXL Component Events
cxl/region: Convert cxl_pmem_region_alloc to scope-based resource management
cxl/acpi: Cleanup __cxl_parse_cfmws()
cxl/region: Fix cxlr_pmem leaks
cxl/core: Add region info to cxl_general_media and cxl_dram events
cxl/region: Move cxl_trace_hpa() work to the region driver
cxl/region: Move cxl_dpa_to_region() work to the region driver
cxl/trace: Correct DPA field masks for general_media & dram events
MAINTAINERS: repair file entry in COMPUTE EXPRESS LINK
cxl/cxl-event: include missing <linux/types.h> and <linux/uuid.h>
cxl/hdm: Debug, use decoder name function
cxl: Fix use of phys_to_target_node() for x86
cxl/hdm: dev_warn() on unsupported mixed mode decoder
cxl/test: Enhance event testing
cxl/hdm: Add debug message for invalid interleave granularity
cxl: Fix compile warning for cxl_security_ops extern
cxl/mbox: Add Clear Log mailbox command
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Ira Weiny:
"The changes include removing duplicate code and updating the nvdimm
tree to the current kernel interfaces such as using const for struct
device_type and changing the platform remove callback signature"
* tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove redundant assignment to variable rc
ndtest: Convert to platform remove callback returning void
nvdimm/btt: always set max_integrity_segments
nvdimm: remove nd_integrity_init
dax: constify the struct device_type usage
powerpc/papr_scm: Move duplicate definitions to common header files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.
Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The series is causing issues with PHY drivers built as modules.
Since it was only partially applied and the merge window has
opened let's revert and try again for v6.11.
Revert 6916e461e793 ("net: phy: Introduce ethernet link topology representation")
Revert 0ec5ed6c130e ("net: sfp: pass the phy_device when disconnecting an sfp module's PHY")
Revert e75e4e074c44 ("net: phy: add helpers to handle sfp phy connect/disconnect")
Revert fdd353965b52 ("net: sfp: Add helper to return the SFP bus name")
Revert 841942bc6212 ("net: ethtool: Allow passing a phy index for some commands")
Link: https://lore.kernel.org/all/171242462917.4000.9759453824684907063.git-patchwork-notify@kernel.org/
Link: https://lore.kernel.org/all/20240507102822.2023826-1-maxime.chevallier@bootlin.com/
Link: https://lore.kernel.org/r/20240513154156.104281-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-13
We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).
The main changes are:
1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.
2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.
3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.
4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.
5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.
6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.
7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.
8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.
9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.
10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.
11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.
12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.
13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.
14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.
15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.
16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.
17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================
Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
