| Age | Commit message (Collapse) | Author |
|---|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, and the snapshot helpers are now prefix by
"rcu_watching". Reflect that change into the storage variables for these
snapshots.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, the dynticks prefix can go.
While at it, this helper is only meant to be called after failing an
earlier call to rcu_watching_snap_in_eqs(), document this in the comments
and add a WARN_ON_ONCE() for good measure.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
While at it, update a comment that still refers to rcu_dynticks_snap(),
which was removed by commit:
7be2e6323b9b ("rcu: Remove full memory barrier on RCU stall printout")
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
rcu_is_watching_curr_cpu()
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Note that "watching" is the opposite of "in EQS", so the negation is lifted
out of the helper and into the callsites.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
RCU keeps a count of the number of callbacks that the current
rcu_barrier() is waiting on, but there is currently no easy way to
work out which callback is stuck. One way to do this is to mark idle
RCU-barrier callbacks by making the ->next pointer point to the callback
itself, and this commit does just that.
Later commits will use this for debug output.
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
It was discovered that isolated CPUs could sometimes be disturbed by
kworkers processing kfree_rcu() works causing higher than expected
latency. It is because the RCU core uses "system_wq" which doesn't have
the WQ_UNBOUND flag to handle all its work items. Fix this violation of
latency limits by using "system_unbound_wq" in the RCU core instead.
This will ensure that those work items will not be run on CPUs marked
as isolated.
Beside the WQ_UNBOUND flag, the other major difference between system_wq
and system_unbound_wq is their max_active count. The system_unbound_wq
has a max_active of WQ_MAX_ACTIVE (512) while system_wq's max_active
is WQ_DFL_ACTIVE (256) which is half of WQ_MAX_ACTIVE.
Reported-by: Vratislav Bendel <vbendel@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-50220
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Add the __counted_by compiler attribute to the flexible array member
records to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Increment nr_records before adding a new pointer to the records array.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, and the 'dynticks' prefix can be dropped without losing any
meaning.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, and the 'dynticks' prefix can be dropped without losing any
meaning.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
into .nmi_nesting
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, and the 'dynticks' prefix can be dropped without losing any
meaning.
[ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ]
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
.nesting
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
[ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ]
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Within the rcu_sr_normal_gp_cleanup_work() function, there is an acquire
load from rcu_state.srs_done_tail, which is expected to be non-NULL.
This commit adds a WARN_ON_ONCE() to check this expectation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
RCU core can't be running anymore while in the middle of (de-)offloading
since this sort of transition now only applies to offline CPUs.
The SEGCBLIST_RCU_CORE state can therefore be removed.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
RCU core can't be running anymore while in the middle of (de-)offloading
since this sort of transition now only applies to offline CPUs.
The locked callback acceleration handling during the transition can
therefore be removed, along with concurrent batch execution.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
RCU core can't be running anymore while in the middle of (de-)offloading
since this sort of transition now only applies to offline CPUs.
The locked callback acceleration handling during the transition can
therefore be removed.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The barrier_mutex is used currently to protect (de-)offloading
operations and prevent from nocb_lock locking imbalance in rcu_barrier()
and shrinker, and also from misordered RCU barrier invocation.
Now since RCU (de-)offloading is going to happen on offline CPUs, an RCU
barrier will have to be executed while transitionning from offloaded to
de-offloaded state. And this can't happen while holding the
barrier_mutex.
Introduce a NOCB mutex to protect (de-)offloading transitions. The
barrier_mutex is still held for now when necessary to avoid barrier
callbacks reordering and nocb_lock imbalance.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
ct_rcu_watching_cpu_acquire()
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
The symbols relating to the CT_STATE part of context_tracking.state are now
all prefixed with CT_STATE.
The RCU dynticks counter part of that atomic variable still involves
symbols with different prefixes, align them all to be prefixed with
CT_RCU_WATCHING.
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
'nocb.2024.06.03a', 'rcu-tasks.2024.06.06a', 'rcutorture.2024.06.06a' and 'srcu.2024.06.18a' into HEAD
doc.2024.06.06a: Documentation updates.
fixes.2024.07.04a: Miscellaneous fixes.
mb.2024.06.28a: Grace-period memory-barrier redundancy removal.
nocb.2024.06.03a: No-CB CPU updates.
rcu-tasks.2024.06.06a: RCU-Tasks updates.
rcutorture.2024.06.06a: Torture-test updates.
srcu.2024.06.18a: SRCU polled-grace-period updates.
|
|
When rcu_barrier() calls rcu_rdp_cpu_online() and observes a CPU off
rnp->qsmaskinitnext, it means that all accesses from the offline CPU
preceding the CPUHP_TEARDOWN_CPU are visible to RCU barrier, including
callbacks expiration and counter updates.
However interrupts can still fire after stop_machine() re-enables
interrupts and before rcutree_report_cpu_dead(). The related accesses
happening between CPUHP_TEARDOWN_CPU and rnp->qsmaskinitnext clearing
are _NOT_ guaranteed to be seen by rcu_barrier() without proper
ordering, especially when callbacks are invoked there to the end, making
rcutree_migrate_callback() bypass barrier_lock.
The following theoretical race example can make rcu_barrier() hang:
CPU 0 CPU 1
----- -----
//cpu_down()
smpboot_park_threads()
//ksoftirqd is parked now
<IRQ>
rcu_sched_clock_irq()
invoke_rcu_core()
do_softirq()
rcu_core()
rcu_do_batch()
// callback storm
// rcu_do_batch() returns
// before completing all
// of them
// do_softirq also returns early because of
// timeout. It defers to ksoftirqd but
// it's parked
</IRQ>
stop_machine()
take_cpu_down()
rcu_barrier()
spin_lock(barrier_lock)
// observes rcu_segcblist_n_cbs(&rdp->cblist) != 0
<IRQ>
do_softirq()
rcu_core()
rcu_do_batch()
//completes all pending callbacks
//smp_mb() implied _after_ callback number dec
</IRQ>
rcutree_report_cpu_dead()
rnp->qsmaskinitnext &= ~rdp->grpmask;
rcutree_migrate_callback()
// no callback, early return without locking
// barrier_lock
//observes !rcu_rdp_cpu_online(rdp)
rcu_barrier_entrain()
rcu_segcblist_entrain()
// Observe rcu_segcblist_n_cbs(rsclp) == 0
// because no barrier between reading
// rnp->qsmaskinitnext and rsclp->len
rcu_segcblist_add_len()
smp_mb__before_atomic()
// will now observe the 0 count and empty
// list, but too late, we enqueue regardless
WRITE_ONCE(rsclp->len, rsclp->len + v);
// ignored barrier callback
// rcu barrier stall...
This could be solved with a read memory barrier, enforcing the message
passing between rnp->qsmaskinitnext and rsclp->len, matching the full
memory barrier after rsclp->len addition in rcu_segcblist_add_len()
performed at the end of rcu_do_batch().
However the rcu_barrier() is complicated enough and probably doesn't
need too many more subtleties. CPU down is a slowpath and the
barrier_lock seldom contended. Solve the issue with unconditionally
locking the barrier_lock on rcutree_migrate_callbacks(). This makes sure
that either rcu_barrier() sees the empty queue or its entrained
callback will be migrated.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If a CPU is running either a userspace application or a guest OS in
nohz_full mode, it is possible for a system call to occur just as an
RCU grace period is starting. If that CPU also has the scheduling-clock
tick enabled for any reason (such as a second runnable task), and if the
system was booted with rcutree.use_softirq=0, then RCU can add insult to
injury by awakening that CPU's rcuc kthread, resulting in yet another
task and yet more OS jitter due to switching to that task, running it,
and switching back.
In addition, in the common case where that system call is not of
excessively long duration, awakening the rcuc task is pointless.
This pointlessness is due to the fact that the CPU will enter an extended
quiescent state upon returning to the userspace application or guest OS.
In this case, the rcuc kthread cannot do anything that the main RCU
grace-period kthread cannot do on its behalf, at least if it is given
a few additional milliseconds (for example, given the time duration
specified by rcutree.jiffies_till_first_fqs, give or take scheduling
delays).
This commit therefore adds a rcutree.nohz_full_patience_delay kernel
boot parameter that specifies the grace period age (in milliseconds,
rounded to jiffies) before which RCU will refrain from awakening the
rcuc kthread. Preliminary experimentation suggests a value of 1000,
that is, one second. Increasing rcutree.nohz_full_patience_delay will
increase grace-period latency and in turn increase memory footprint,
so systems with constrained memory might choose a smaller value.
Systems with less-aggressive OS-jitter requirements might choose the
default value of zero, which keeps the traditional immediate-wakeup
behavior, thus avoiding increases in grace-period latency.
[ paulmck: Apply Leonardo Bras feedback. ]
Link: https://lore.kernel.org/all/20240328171949.743211-1-leobras@redhat.com/
Reported-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
|
|
RCU stall printout fetches the EQS state of a CPU with a preceding full
memory barrier. However there is nothing to order this read against at
this debugging stage. It is inherently racy when performed remotely.
Do a plain read instead.
This was the last user of rcu_dynticks_snap().
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
When the boot CPU initializes the per-CPU data on behalf of all possible
CPUs, a sanity check is performed on each of them to make sure none is
initialized in an extended quiescent state.
This check involves a full memory barrier which is useless at this early
boot stage.
Do a plain access instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state.
This ordering is enforced through a full memory barrier placed right
before taking the first EQS snapshot. However this is superfluous
because the snapshot is taken while holding the target's rnp lock which
provides the necessary ordering through its chain of
smp_mb__after_unlock_lock().
Remove the needless explicit barrier before the snapshot and put a
comment about the implicit barrier newly relied upon here.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state. Also the GP kthread must
observe all accesses performed by the target prior it entering in
EQS.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state. Also the GP kthread later
observing that EQS must also observe all accesses performed by the
target prior it entering in EQS.
This ordering is explicitly performed both on the first EQS snapshot
and on the second one as well through the combination of a preceding
full barrier followed by an acquire read. However the second snapshot's
full memory barrier is redundant and not needed to enforce the above
guarantees:
GP kthread Remote target
---- -----
// Access prior GP
WRITE_ONCE(A, 1)
// first snapshot
smp_mb()
x = smp_load_acquire(EQS)
// Access prior GP
WRITE_ONCE(B, 1)
// EQS enter
// implied full barrier by atomic_add_return()
atomic_add_return(RCU_DYNTICKS_IDX, EQS)
// implied full barrier by atomic_add_return()
READ_ONCE(A)
// second snapshot
y = smp_load_acquire(EQS)
z = READ_ONCE(B)
If the GP kthread above fails to observe the remote target in EQS
(x not in EQS), the remote target will observe A == 1 after further
entering in EQS. Then the second snapshot taken by the GP kthread only
need to be an acquire read in order to observe z == 1.
Therefore remove the needless full memory barrier on second snapshot.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Interrupts are enabled in rcu_gp_init(), so this commit switches from
local_irq_save() and local_irq_restore() to local_irq_disable() and
local_irq_enable().
Link: https://lore.kernel.org/all/febb13ab-a4bb-48b4-8e97-7e9f7749e6da@moroto.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In the synchronize_rcu() common case, we will have less than
SR_MAX_USERS_WAKE_FROM_GP number of users per GP. Waking up the kworker
is pointless just to free the last injected wait head since at that point,
all the users have already been awakened.
Introduce a new counter to track this and prevent the wakeup in the
common case.
[ paulmck: Remove atomic_dec_return_release in cannot-happen state. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
'rcu-sync-normal-improve.2024.04.15a', 'rcu-tasks.2024.04.15a' and 'rcutorture.2024.04.15a' into rcu-merge.2024.04.15a
fixes.2024.04.15a: RCU fixes
misc.2024.04.12a: Miscellaneous fixes
rcu-sync-normal-improve.2024.04.15a: Improving synchronize_rcu() call
rcu-tasks.2024.04.15a: Tasks RCU updates
rcutorture.2024.04.15a: Torture-test updates
|
|
This commit make rcu-tasks related rcutorture test support rcu-tasks
gp state printing when the writer stall occurs or the at the end of
rcutorture test, and generate rcu_ops->get_gp_data() operation to
simplify the acquisition of gp state for different types of rcutorture
tests.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
synchronize_rcu() users have to be processed regardless
of memory pressure so our private WQ needs to have at least
one execution context what WQ_MEM_RECLAIM flag guarantees.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
This patch introduces a small enhancement which allows to do a
direct wake-up of synchronize_rcu() callers. It occurs after a
completion of grace period, thus by the gp-kthread.
Number of clients is limited by the hard-coded maximum allowed
threshold. The remaining part, if still exists is deferred to
a main worker.
Link: https://lore.kernel.org/lkml/Zd0ZtNu+Rt0qXkfS@lothringen/
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Add an rcu_sr_normal() trace event. It takes three arguments
first one is the name of RCU flavour, second one is a user id
which triggeres synchronize_rcu_normal() and last one is an
event.
There are two traces in the synchronize_rcu_normal(). On entry,
when a new request is registered and on exit point when request
is completed.
Please note, CONFIG_RCU_TRACE=y is required to activate traces.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
A call to a synchronize_rcu() can be optimized from a latency
point of view. Workloads which depend on this can benefit of it.
The delay of wakeme_after_rcu() callback, which unblocks a waiter,
depends on several factors:
- how fast a process of offloading is started. Combination of:
- !CONFIG_RCU_NOCB_CPU/CONFIG_RCU_NOCB_CPU;
- !CONFIG_RCU_LAZY/CONFIG_RCU_LAZY;
- other.
- when started, invoking path is interrupted due to:
- time limit;
- need_resched();
- if limit is reached.
- where in a nocb list it is located;
- how fast previous callbacks completed;
Example:
1. On our embedded devices i can easily trigger the scenario when
it is a last in the list out of ~3600 callbacks:
<snip>
<...>-29 [001] d..1. 21950.145313: rcu_batch_start: rcu_preempt CBs=3613 bl=28
...
<...>-29 [001] ..... 21950.152578: rcu_invoke_callback: rcu_preempt rhp=00000000b2d6dee8 func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152579: rcu_invoke_callback: rcu_preempt rhp=00000000a446f607 func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152580: rcu_invoke_callback: rcu_preempt rhp=00000000a5cab03b func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152581: rcu_invoke_callback: rcu_preempt rhp=0000000013b7e5ee func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152582: rcu_invoke_callback: rcu_preempt rhp=000000000a8ca6f9 func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152583: rcu_invoke_callback: rcu_preempt rhp=000000008f162ca8 func=wakeme_after_rcu.cfi_jt
<...>-29 [001] d..1. 21950.152625: rcu_batch_end: rcu_preempt CBs-invoked=3612 idle=....
<snip>
2. We use cpuset/cgroup to classify tasks and assign them into
different cgroups. For example "backgrond" group which binds tasks
only to little CPUs or "foreground" which makes use of all CPUs.
Tasks can be migrated between groups by a request if an acceleration
is needed.
See below an example how "surfaceflinger" task gets migrated.
Initially it is located in the "system-background" cgroup which
allows to run only on little cores. In order to speed it up it
can be temporary moved into "foreground" cgroup which allows
to use big/all CPUs:
cgroup_attach_task():
-> cgroup_migrate_execute()
-> cpuset_can_attach()
-> percpu_down_write()
-> rcu_sync_enter()
-> synchronize_rcu()
-> now move tasks to the new cgroup.
-> cgroup_migrate_finish()
<snip>
rcuop/1-29 [000] ..... 7030.528570: rcu_invoke_callback: rcu_preempt rhp=00000000461605e0 func=wakeme_after_rcu.cfi_jt
PERFD-SERVER-1855 [000] d..1. 7030.530293: cgroup_attach_task: dst_root=3 dst_id=22 dst_level=1 dst_path=/foreground pid=1900 comm=surfaceflinger
TimerDispatch-2768 [002] d..5. 7030.537542: sched_migrate_task: comm=surfaceflinger pid=1900 prio=98 orig_cpu=0 dest_cpu=4
<snip>
"Boosting a task" depends on synchronize_rcu() latency:
- first trace shows a completion of synchronize_rcu();
- second shows attaching a task to a new group;
- last shows a final step when migration occurs.
3. To address this drawback, maintain a separate track that consists
of synchronize_rcu() callers only. After completion of a grace period
users are deferred to a dedicated worker to process requests.
4. This patch reduces the latency of synchronize_rcu() approximately
by ~30-40% on synthetic tests. The real test case, camera launch time,
shows(time is in milliseconds):
1-run 542 vs 489 improvement 9%
2-run 540 vs 466 improvement 13%
3-run 518 vs 468 improvement 9%
4-run 531 vs 457 improvement 13%
5-run 548 vs 475 improvement 13%
6-run 509 vs 484 improvement 4%
Synthetic test(no "noise" from other callbacks):
Hardware: x86_64 64 CPUs, 64GB of memory
Linux-6.6
- 10K tasks(simultaneous);
- each task does(1000 loops)
synchronize_rcu();
kfree(p);
default: CONFIG_RCU_NOCB_CPU: takes 54 seconds to complete all users;
patch: CONFIG_RCU_NOCB_CPU: takes 35 seconds to complete all users.
Running 60K gives approximately same results on my setup. Please note
it is without any interaction with another type of callbacks, otherwise
it will impact a lot a default case.
5. By default it is disabled. To enable this perform one of the
below sequence:
echo 1 > /sys/module/rcutree/parameters/rcu_normal_wake_from_gp
or pass a boot parameter "rcutree.rcu_normal_wake_from_gp=1"
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Co-developed-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Currently, there are rcu_data structure fields named ->rcu_onl_gp_seq
and ->rcu_ofl_gp_seq that track the rcu_state.gp_flags field at the
time of the corresponding CPU's last online or offline operation,
respectively. However, this information is not particularly useful.
It would be better to instead track the grace period state kept
in rcu_state.gp_state. This would also be consistent with the
initialization in rcu_boot_init_percpu_data(), which is to RCU_GP_CLEANED
(an rcu_state.gp_state value), and also with the diagnostics in
rcu_implicit_dynticks_qs(), whose format is consistent with an integer,
not a bitmask.
This commit therefore makes this change and changes the names to
->rcu_onl_gp_flags and ->rcu_ofl_gp_flags, respectively.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
The rcu_state.n_online_cpus value is only ever updated by CPU-hotplug
operations, which are serialized. However, this value is read locklessly.
This commit therefore marks those reads. While in the area, it also
adds ASSERT_EXCLUSIVE_WRITER() calls just in case parallel CPU hotplug
becomes a thing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Although it is functionally OK to do READ_ONCE() of a variable that
cannot change, it is confusing and at best an accident waiting to happen.
This commit therefore removes a number of READ_ONCE(rcu_state.gp_flags)
instances from kernel/rcu/tree.c that are not needed due to updates
to this field being excluded by virtue of holding the root rcu_node
structure's ->lock.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/4857c5ef-bd8f-4670-87ac-0600a1699d05@paulmck-laptop/T/#mccb23c2a4902da4d3c750165329f8de056903c58
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/lkml/4857c5ef-bd8f-4670-87ac-0600a1699d05@paulmck-laptop/T/#md1b5c026584f9c3c7b0fbc9240dd7de584597b73
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
There is some indications that rcu_softirq_qs() might be more generally
used than anticipated. This commit therefore adds some lockdep assertions
and some cautionary tales in a new kernel-doc header.
Link: https://lore.kernel.org/all/Zd4DXTyCf17lcTfq@debian.debian/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yan Zhai <yan@cloudflare.com>
Cc: <netdev@vger.kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
'rcu-exp.2024.02.14a', 'rcu-tasks.2024.02.26a' and 'rcu-misc.2024.02.14a' into rcu.2024.02.26a
|
|
In order for RCU Tasks to reliably maintain per-CPU lists of exiting
tasks, those lists must be initialized before it is possible for tasks
to exit, especially given that the boot CPU is not necessarily CPU 0
(an example being, powerpc kexec() kernels). And at the time that
rcu_init_tasks_generic() is called, a task could potentially exit,
unconventional though that sort of thing might be.
This commit therefore moves the calls to cblist_init_generic() from
functions called from rcu_init_tasks_generic() to a new function named
tasks_cblist_init_generic() that is invoked from rcu_init().
This constituted a bug in a commit that never went to mainline, so
there is no need for any backporting to -stable.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
To allow more flexible arrangements while still provide a single kernel
for distros, provide a boot time parameter to enable/disable lazy RCU.
Specify:
rcutree.enable_rcu_lazy=[y|1|n|0]
Which also requires
rcu_nocbs=all
at boot time to enable/disable lazy RCU.
To disable it by default at build time when CONFIG_RCU_LAZY=y, the new
CONFIG_RCU_LAZY_DEFAULT_OFF can be used.
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
TREE04 running on short iterations can produce writer stalls of the
following kind:
??? Writer stall state RTWS_EXP_SYNC(4) g3968 f0x0 ->state 0x2 cpu 0
task:rcu_torture_wri state:D stack:14568 pid:83 ppid:2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x2de/0x850
? trace_event_raw_event_rcu_exp_funnel_lock+0x6d/0xb0
schedule+0x4f/0x90
synchronize_rcu_expedited+0x430/0x670
? __pfx_autoremove_wake_function+0x10/0x10
? __pfx_synchronize_rcu_expedited+0x10/0x10
do_rtws_sync.constprop.0+0xde/0x230
rcu_torture_writer+0x4b4/0xcd0
? __pfx_rcu_torture_writer+0x10/0x10
kthread+0xc7/0xf0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Waiting for an expedited grace period and polling for an expedited
grace period both are operations that internally rely on the same
workqueue performing necessary asynchronous work.
However, a dependency chain is involved between those two operations,
as depicted below:
====== CPU 0 ======= ====== CPU 1 =======
synchronize_rcu_expedited()
exp_funnel_lock()
mutex_lock(&rcu_state.exp_mutex);
start_poll_synchronize_rcu_expedited
queue_work(rcu_gp_wq, &rnp->exp_poll_wq);
synchronize_rcu_expedited_queue_work()
queue_work(rcu_gp_wq, &rew->rew_work);
wait_event() // A, wait for &rew->rew_work completion
mutex_unlock() // B
//======> switch to kworker
sync_rcu_do_polled_gp() {
synchronize_rcu_expedited()
exp_funnel_lock()
mutex_lock(&rcu_state.exp_mutex); // C, wait B
....
} // D
Since workqueues are usually implemented on top of several kworkers
handling the queue concurrently, the above situation wouldn't deadlock
most of the time because A then doesn't depend on D. But in case of
memory stress, a single kworker may end up handling alone all the works
in a serialized way. In that case the above layout becomes a problem
because A then waits for D, closing a circular dependency:
A -> D -> C -> B -> A
This however only happens when CONFIG_RCU_EXP_KTHREAD=n. Indeed
synchronize_rcu_expedited() is otherwise implemented on top of a kthread
worker while polling still relies on rcu_gp_wq workqueue, breaking the
above circular dependency chain.
Fix this with making expedited grace period to always rely on kthread
worker. The workqueue based implementation is essentially a duplicate
anyway now that the per-node initialization is performed by per-node
kthread workers.
Meanwhile the CONFIG_RCU_EXP_KTHREAD switch is still kept around to
manage the scheduler policy of these kthread workers.
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Affine the parallel expedited gp kworkers to their respective RCU node
in order to make them close to the cache their are playing with.
This reuses the boost kthreads machinery that probe into CPU hotplug
operations such that the kthreads become/stay affine to their respective
node as soon/long as they contain online CPUs. Otherwise and if the
current CPU going down was the last online on the leaf node, the related
kthread is affine to the housekeeping CPUs.
In the long run, this affinity VS CPU hotplug operation game should
probably be implemented at the generic kthread level.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
[boqun: s/* rcu_boost_task/*rcu_boost_task as reported by checkpatch]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
When CONFIG_RCU_EXP_KTHREAD=n, the expedited grace period per node
initialization is performed in parallel via workqueues (one work per
node).
However in CONFIG_RCU_EXP_KTHREAD=y, this per node initialization is
performed by a single kworker serializing each node initialization (one
work for all nodes).
The second part is certainly less scalable and efficient beyond a single
leaf node.
To improve this, expand this single kworker into per-node kworkers. This
new layout is eventually intended to remove the workqueues based
implementation since it will essentially now become duplicate code.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
rcutree_prepare_cpu()
The expedited kthread worker performing the per node initialization is
going to be split into per node kthreads. As such, the future per node
kthread creation will need to be called from CPU hotplug callbacks
instead of an initcall, right beside the per node boost kthread
creation.
To prepare for that, move the kthread worker creation above
rcutree_prepare_cpu() as a first step to make the review smoother for
the upcoming modifications.
No intended functional change.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
This mutex is currently protecting per node boost kthreads creation and
affinity setting across CPU hotplug operations.
Since the expedited kworkers will soon be split per node as well, they
will be subject to the same concurrency constraints against hotplug.
Therefore their creation and affinity tuning operations will be grouped
with those of boost kthreads and then rely on the same mutex.
To prepare for that, generalize its name.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
