Age | Commit message (Collapse) | Author |
|
Recent commit to add NETFILTER_XTABLES_LEGACY missed setting
a couple of configs to y. They are still enabled but as modules
which appears to have upset BPF CI, e.g.:
test_bpf_nf_ct:FAIL:iptables-legacy -t raw -A PREROUTING -j CONNMARK --set-mark 42/0 unexpected error: 768 (errno 0)
Fixes: 3c3ab65f00eb ("selftests: net: Enable legacy netfilter legacy options.")
Link: https://patch.msgid.link/20250726155349.1161845-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes to prepare for the 6.17 net-next PR.
Conflicts:
net/core/neighbour.c
1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().")
13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.")
03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries")
Adjacent changes:
drivers/net/usb/usbnet.c
0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism")
net/ipv6/route.c
31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings")
1caf27297215 ("ipv6: adopt dst_dev() helper")
3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.
Without this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
esp4_offload 12288 0
esp4 32768 1 esp4_offload
With this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Xiumei Mu <xmu@redhat.com>
Reviewed-by: Shannon Nelson <sln@onemain.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/6d3a1d777c4de4eb0ca94ced9e77be8d48c5b12f.1753415428.git.xmu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend vgic_init to test the nASSGIcap attribute, asserting that it is
configurable (within reason) prior to initializing the VGIC.
Additionally, check that userspace cannot set the attribute after the
VGIC has been initialized.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We have a lot of more or less useful vgic tests, but none of them
tracks the availability of GICv3 system registers, which is a bit
annoying.
Add one such test, which covers both EL1 and EL2 registers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250718111154.104029-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
For arm64 64K page size, the xdp data size was set to be more than 64K
in one of previous patches. This will cause failure for bpf_dynptr_memset().
Since the failure of bpf_dynptr_memset() is expected with 64K page size,
return success.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250725043440.209266-1-yonghong.song@linux.dev
|
|
For arm64 64K page size, the bpf_dynptr_copy() in test dynptr/test_dynptr_copy_xdp
will succeed, but the test will failure with 4K page size. This patch made a change
so the test will fail expectedly for both 4K and 64K page sizes.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://patch.msgid.link/20250725043435.208974-1-yonghong.song@linux.dev
|
|
With arm64 64K page size, the following 4 subtests failed:
#97/25 dynptr/test_probe_read_user_dynptr:FAIL
#97/26 dynptr/test_probe_read_kernel_dynptr:FAIL
#97/27 dynptr/test_probe_read_user_str_dynptr:FAIL
#97/28 dynptr/test_probe_read_kernel_str_dynptr:FAIL
These failures are due to function bpf_dynptr_check_off_len() in
include/linux/bpf.h where there is a test
if (len > size || offset > size - len)
return -E2BIG;
With 64K page size, the 'offset' is greater than 'size - len',
which caused the test failure.
For 64KB page size, this patch increased the xdp buffer size from 5000 to
90000. The above 4 test failures are fixed as 'size' value is increased.
But it introduced two new failures:
#97/4 dynptr/test_dynptr_copy_xdp:FAIL
#97/12 dynptr/test_dynptr_memset_xdp_chunks:FAIL
These two failures will be addressed in subsequent patches.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://patch.msgid.link/20250725043430.208469-1-yonghong.song@linux.dev
|
|
Currently, UDP exchange is prone to failure when cmd attempt to send data
while socat in bkg is not ready. Since, the behavior is probabilistic, this
can result in flakiness for XDP tests. While testing
test_xdp_native_tx_mb() on netdevsim, a failure rate of around 1% in 500
500 iterations was observed.
Use wait_port_listen() to ensure that the bkg socat is started and ready to
receive before cmd start sending. With proposed changes, a re-run of the
same test passed 100% of time.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250724235140.2645885-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following series contains Netfilter/IPVS updates for net-next:
1) Display netns inode in conntrack table full log, from lvxiafei.
2) Autoload nf_log_syslog in case no logging backend is available,
from Lance Yang.
3) Three patches to remove unused functions in x_tables, nf_tables and
conntrack. From Yue Haibing.
4) Exclude LEGACY TABLES on PREEMPT_RT: Add NETFILTER_XTABLES_LEGACY
to exclude xtables legacy infrastructure.
5) Restore selftests by toggling NETFILTER_XTABLES_LEGACY where needed.
From Florian Westphal.
6) Use CONFIG_INET_SCTP_DIAG in tools/testing/selftests/net/netfilter/config,
from Sebastian Andrzej Siewior.
7) Use timer_delete in comment in IPVS codebase, from WangYuli.
8) Dump flowtable information in nfnetlink_hook, this includes an initial
patch to consolidate common code in helper function, from Phil Sutter.
9) Remove unused arguments in nft_pipapo set backend, from Florian Westphal.
10) Return nft_set_ext instead of boolean in set lookup function,
from Florian Westphal.
11) Remove indirection in dynamic set infrastructure, also from Florian.
12) Consolidate pipapo_get/lookup, from Florian.
13) Use kvmalloc in nft_pipapop, from Florian Westphal.
14) syzbot reports slab-out-of-bounds in xt_nfacct log message,
fix from Florian Westphal.
15) Ignored tainted kernels in selftest nft_interface_stress.sh,
from Phil Sutter.
16) Fix IPVS selftest by disabling rp_filter with ipip tunnel device,
from Yi Chen.
* tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
selftests: netfilter: Ignore tainted kernels in interface stress test
netfilter: xt_nfacct: don't assume acct name is null-terminated
netfilter: nft_set_pipapo: prefer kvmalloc for scratch maps
netfilter: nft_set_pipapo: merge pipapo_get/lookup
netfilter: nft_set: remove indirection from update API call
netfilter: nft_set: remove one argument from lookup and update functions
netfilter: nft_set_pipapo: remove unused arguments
netfilter: nfnetlink_hook: Dump flowtable info
netfilter: nfnetlink: New NFNLA_HOOK_INFO_DESC helper
ipvs: Rename del_timer in comment in ip_vs_conn_expire_now()
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
selftests: net: Enable legacy netfilter legacy options.
netfilter: Exclude LEGACY TABLES on PREEMPT_RT.
netfilter: conntrack: Remove unused net in nf_conntrack_double_lock()
netfilter: nf_tables: Remove unused nft_reduce_is_readonly()
netfilter: x_tables: Remove unused functions xt_{in|out}name()
netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid
netfilter: conntrack: table full detailed log
====================
Link: https://patch.msgid.link/20250725170340.21327-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many of the original rtla tests included durations of 1 minute and 30
seconds. Experience has shown this is unnecessary, since 10 seconds as
waiting time for samples to appear.
Change duration of all rtla tests to at most 10 seconds. This speeds up
testing significantly.
Before:
$ make check
All tests successful.
Files=3, Tests=54, 536 wallclock secs
( 0.03 usr 0.00 sys + 20.31 cusr 22.02 csys = 42.36 CPU)
Result: PASS
After:
$ make check
...
All tests successful.
Files=3, Tests=54, 196 wallclock secs
( 0.03 usr 0.01 sys + 20.28 cusr 20.68 csys = 41.00 CPU)
Result: PASS
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-9-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a bunch of tests covering most of both --on-threshold and --on-end.
Parts sensitive to implementation of hist/top are tested for both.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-8-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add argument to the check command in the test suite that takes a regular
expression that the output of rtla command is checked against. This
allows testing for specific information in rtla output in addition
to checking the return value.
Two minor improvements are included: running rtla with "eval" so that
arguments with spaces can be passed to it via shell quotations, and
the stdout of pushd and popd is suppressed to clean up the test output.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being
executed whenever a latency threshold is reached, it is executed at the
end of the measurement.
For example:
$ rtla timerlat hist -d 5s --on-end trace
will save the trace output at the end.
All actions supported by --on-threshold are also supported by --on-end,
except for continue, which does nothing with --on-end.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Introduce option to resume tracing after a latency threshold overflow.
The option is implemented as an action named "continue".
Example:
$ rtla timerlat top -q -T 200 -d 1s --on-threshold \
exec,command="echo Threshold" --on-threshold continue
Threshold
Threshold
Threshold
Timer Latency
...
The feature is supported for both hist and top. After the continue
action is executed, processing of the list of actions is stopped and
tracing is resumed.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, rtla-timerlat BPF program uses a global variable stored in a
.bss section to store whether tracing has been stopped.
Move the information to a separate map, so that it is easily writable
from userspace, and add a function that clears the value, resuming
tracing after it has been stopped.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Extend the functionality provided by the -t/--trace option, which
triggers saving the contents of a tracefs buffer after tracing is
stopped, to support implementing arbitrary actions.
A new option, --on-threshold, is added, taking an argument
that further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename.
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process.
- shell,command=<command>: Execute shell command.
Multiple actions may be specified and will be executed in order,
including multiple actions of the same type. Trace output requested via
-t and -a now adds a trace action to the end of the list.
If an action fails, the following actions are not executed. For
example, this command:
$ rtla timerlat -T 20 --on-threshold trace \
--on-threshold shell,command="grep ipi_send timerlat_trace.txt" \
--on-threshold signal,num=2,pid=parent
will send signal 2 (SIGINT) to parent process, but only if saved trace
contains the text "ipi_send".
This way, the feature can be used for flexible reactions on latency
spikes, and allows combining rtla with other tooling like perf.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
After the introduction of BPF-based sample collection, rtla-timerlat
effectively runs in one of three modes:
- Pure BPF mode, with tracefs only being used to set up the timerlat
tracer. Sample processing and stop on threshold are handled by BPF.
- tracefs mode. BPF is unsupported or kernel is lacking the necessary
trace event (osnoise:timerlat_sample). Stop on theshold is handled by
timerlat tracer stopping tracing in all instances.
- BPF/tracefs mixed mode - BPF is used for sample collection for top or
histogram, tracefs is used for trace output and/or auto-analysis. Stop
on threshold is handled both through BPF program, which stops sample
collection for top/histogram and wakes up rtla, and by timerlat
tracer, which stops tracing for trace output/auto-analysis instances.
Add enum timerlat_tracing_mode, with three values:
- TRACING_MODE_BPF
- TRACING_MODE_TRACEFS
- TRACING_MODE_MIXED
Those represent the modes described above. A field of this type is added
to struct timerlat_params, named "mode", replacing the no_bpf variable.
params->mode is set in timerlat_{top,hist}_parse_args to
TRACING_MODE_BPF or TRACING_MODE_MIXED based on whether trace output
and/or auto-analysis is requested. timerlat_{top,hist}_main then checks
if BPF is not unavailable or disabled, in that case, it sets
params->mode to TRACING_MODE_TRACEFS.
A condition is added to timerlat_apply_config that skips setting
timerlat tracer thresholds if params->mode is TRACING_MODE_BPF (those
are unnecessary, since they only turn off tracing, which is already
turned off in that case, since BPF is used to collect samples).
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
It is currently impossible to enable ipv6 forwarding on a per-interface
basis like in ipv4. To enable forwarding on an ipv6 interface we need to
enable it on all interfaces and disable it on the other interfaces using
a netfilter rule. This is especially cumbersome if you have lots of
interfaces and only want to enable forwarding on a few. According to the
sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding
for all interfaces, while the interface-specific
`net.ipv6.conf.<interface>.forwarding` configures the interface
Host/Router configuration.
Introduce a new sysctl flag `force_forwarding`, which can be set on every
interface. The ip6_forwarding function will then check if the global
forwarding flag OR the force_forwarding flag is active and forward the
packet.
To preserve backwards-compatibility reset the flag (on all interfaces)
to 0 if the net.ipv6.conf.all.forwarding flag is set to 0.
Add a short selftest that checks if a packet gets forwarded with and
without `force_forwarding`.
[0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the `check_for_dependencies()` function in `lib_netcons.sh` to check
whether IPv6 is enabled by verifying the existence of
`/proc/net/if_inet6`. Having IPv6 is a now a dependency of netconsole
tests. If the file does not exist, the script will skip the test with an
appropriate message suggesting to verify if `CONFIG_IPV6` is enabled.
This prevents the test to misbehave if IPv6 is not configured.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netcons_test_ipv6-v1-1-41c9092f93f9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add reproducer for [0] with a dummy device.
0: https://lore.kernel.org/netdev/2aff4342b0f5b1539c02ffd8df4c7e58dd9746e7.camel@nvidia.com/
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723224715.1341121-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously arch_support_sort_key and arch_perf_header_entry used a
weak symbol to compile as appropriate for x86 and powerpc. A
limitation to this is that the handling of a data file could vary in
cross-platform development. Change to using the perf_env of the
current session to determine the architecture kind and set the sort
key and header entries as appropriate.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-23-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
test__x86_sample_parsing is identical to test__sample_parsing except
it explicitly tested PERF_SAMPLE_WEIGHT_STRUCT. Now the parsing code
is common move the PERF_SAMPLE_WEIGHT_STRUCT to the common sample
parsing test and remove the x86 version.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-22-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
By definition arch sample parsing and synthesis will inhibit certain
kinds of cross-platform record then analysis (report, script,
etc.). Remove arch_perf_parse_sample_weight and
arch_perf_synthesize_sample_weight replacing with a common
implementation. Combine perf_sample p_stage_cyc and retire_lat as
weight3 to capture the differing uses regardless of compiled for
architecture.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The global perf_env was used for the host, but if a perf_env wasn't
easy to come by it was used in a lot of places where potentially
recorded and host data could be confused. Remove the global variable
as now the majority of accesses retrieve the perf_env for the host
from the session.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-20-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There is no session in perf trace unless in replay mode, so in host
mode no session can be associated with the evlist. If the evsel__env
call fails resort to the host_env that's part of the trace. Remove
errno_to_name as it becomes a called once 1-line function once the
argument is turned into a perf_env, just call perf_env__arch_strerrno
directly.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-19-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
auxtrace_mmap__read and auxtrace_mmap__read_snapshot end up calling
`evsel__env(NULL)` which returns the global perf_env variable for the
host. Their only call is in perf record. Rather than use the global
variable pass through the perf_env for `perf record`.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-18-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When creating a machine for the host explicitly pass in a scoped
perf_env. This removes a use of the global perf_env.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-17-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The benchmark doesn't use a data file and so the header perf_env isn't
used. Stack allocate a host perf_env for use to avoid the use of the
global perf_env.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-16-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The use of the global host perf_env variable is potentially
inconsistent within the code. Switch perf top to using a locally
scoped variable that is generally accessed through the session.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-15-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When creating a perf_session the host perf_env may or may not want to
be used. For example, `perf top` uses a host perf_env while `perf
inject` does not. Add a host_env argument to perf_session__new so that
sessions requiring a host perf_env can pass it in. Currently if none
is specified the global perf_env variable is used, but this will
change in later patches.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The perf_env global variable holds the host perf_env data but its use
is hit and miss. Switch to using local perf_env variables and ensure
scoped perf_env__init and perf_env__exit. This loses command line
setting of the perf_env, but this doesn't matter for tests. So the
perf_env is fully initialized, clear it with memset in perf_env__init.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Always use the perf_env from the feat_fd's perf_header. Cache the
value on entry to a function in `env` and use `env->` consistently in
the code. Ensure the header is initialized for use in
perf_session__do_write_header.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The session holds a perf_env pointer env. In UI code container_of is
used to turn the env to a session, but this assumes the session
header's env is in use. Rather than a dubious container_of, hold the
session in the evlist and derive the env from the session with
evsel__env, perf_session__env, etc.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The perf_env from the header in the session is frequently accessed,
add an accessor function rather than access directly. Cache the value
to avoid repeated calls. No behavioral change.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Support for build IDs in mmap2 perf events has been present since
Linux v5.12:
https://lore.kernel.org/lkml/20210219194619.1780437-1-acme@kernel.org/
Build ID mmap events don't avoid the need to inject build IDs for DSO
touched by samples as the build ID cache is populated by perf
record. They can avoid some cases of symbol mis-resolution caused by
the file system changing from when a sample occurred and when the DSO
is sought.
Unlike the --buildid-mmap option, this chnage doesn't disable the
build ID cache but it does disable the processing of samples looking
for DSOs to inject build IDs for. To disable the build ID cache the -B
(--no-buildid) option should be used.
Making this option the default was raised on the list in:
https://lore.kernel.org/linux-perf-users/CAP-5=fXP7jN_QrGUcd55_QH5J-Y-FCaJ6=NaHVtyx0oyNh8_-Q@mail.gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The DSO being generated was being accessed through a thread's maps,
this is unnecessary as the dso can just be directly found. This avoids
problems with passing a NULL evsel which may be inspected to determine
properties of a callchain when using the buildid DSO marking code.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The dso_id previously contained the major, minor, inode and inode
generation information from a mmap2 event - the inode generation would
be zero when reading from /proc/pid/maps. The build_id was in the
dso. With build ID mmap2 events these fields wouldn't be initialized
which would largely mean the special empty case where any dso would
match for equality. This isn't desirable as if a dso is replaced we
want the comparison to yield a difference.
To support detecting the difference between DSOs based on build_id,
move the build_id out of the DSO and into the dso_id. The dso_id is
also stored in the DSO so nothing is lost. Capture in the dso_id what
parts have been initialized and rename dso_id__inject to
dso_id__improve_id so that it is clear the dso_id is being improved
upon with additional information. With the build_id in the dso_id, use
memcmp to compare for equality.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If a build ID is read then not all code paths may ensure it is empty
before use. Initialize the build_id to be zero-ed unless there is
clear initialization such as a call to build_id__init.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Previously only the sample IP's map DSO would be marked hit for the
purposes of populating the build ID cache. Walk the call chain to mark
all IPs and DSOs.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pass in a size argument rather than implying all build id strings must
be SBUILD_ID_SIZE.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-4-irogers@google.com
[ fixed some build errors ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Although setup_ns() set net.ipv4.conf.default.rp_filter=0,
loading certain module such as ipip will automatically create a tunl0 interface
in all netns including new created ones. In the script, this is before than
default.rp_filter=0 applied, as a result tunl0.rp_filter remains set to 1
which causes the test report FAIL when ipip module is preloaded.
Before fix:
Testing DR mode...
Testing NAT mode...
Testing Tunnel mode...
ipvs.sh: FAIL
After fix:
Testing DR mode...
Testing NAT mode...
Testing Tunnel mode...
ipvs.sh: PASS
Fixes: 7c8b89ec506e ("selftests: netfilter: remove rp_filter configuration")
Signed-off-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Complain about kernel taint value only if it wasn't set at start
already.
Fixes: 73db1b5dab6f ("selftests: netfilter: Torture nftables netdev hooks")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The config snippet specifies CONFIG_SCTP_DIAG. This was never an option.
Replace CONFIG_SCTP_DIAG with the intended CONFIG_INET_SCTP_DIAG.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Some specified options rely on NETFILTER_XTABLES_LEGACY to be enabled.
IP_NF_TARGET_TTL for instance depends on IP_NF_MANGLE which in turn
depends on IP_NF_IPTABLES_LEGACY -> NETFILTER_XTABLES_LEGACY.
Enable relevant iptables config options explicitly, this is needed
to avoid breakage when symbols related to iptables-legacy
will depend on NETFILTER_LEGACY resp. IP_TABLES_LEGACY.
This also means that the classic tables (Kernel modules) will
not be enabled by default, so enable them too.
Signed-off-by: Florian Westphal <fw@strlen.de>
[bigeasy: Split out the config bits from the main patch]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
|
|
Check that moving a range of VMAs where we are offset into the first and
last VMAs works correctly.
This results in the VMAs being split at these points at which we are offset
into VMAs.
We explicitly test both the ordinary MREMAP_FIXED multi VMA move case and
the MREMAP_DONTUNMAP multi VMA move case.
Link: https://lkml.kernel.org/r/b04920bb6c09dc86c207c251eab8ec670fbbcaef.1753119043.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We support MREMAP_MAYMOVE | MREMAP_FIXED | MREMAP_DONTUNMAP for moving
multiple VMAs via mremap(), so assert that the tests pass with both
MREMAP_DONTUNMAP set and not set.
Additionally, add success = false settings when mremap() fails. This is
something that cannot realistically happen, so in no way impacted test
outcome, but it is incorrect to indicate a test pass when something has
failed.
Link: https://lkml.kernel.org/r/d7359941981e4e44c774753b3e364d1c54928e6a.1753119043.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "tools/testing: expand mremap testing".
Expand our mremap() testing to further assert that behaviour is as
expected.
There is a poorly documented mremap() feature whereby it is possible to
mremap() multiple VMAs (even with gaps) when shrinking, as long as the
resultant shrunk range spans only a single VMA.
So we start by asserting this behaviour functions correctly both with an
in-place shrink and a shrink/move.
Next, we further test the newly introduced ability to mremap() multiple
VMAs when performing a MAP_FIXED move (that is without the size being
changed), firstly by asserting that MREMAP_DONTUNMAP has no bearing on
this behaviour.
Finally, we explicitly test that such moves, when splitting source VMAs,
function correctly.
This patch (of 3):
There is an apparently little-known feature of mremap() whereby, in stark
contrast to other modes (other than the recently introduced capacity to
move multiple VMAs), the input source range span multiple VMAs with gaps
between.
This is, when shrinking a VMA, whether moving it or not, and the shrink
would reduce the range to a single VMA - this is permitted, as the shrink
is actioned by an unmap.
This patch adds tests to assert that this behaves as expected.
Link: https://lkml.kernel.org/r/cover.1753119043.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/f08122893a26092a2bec6e69443e87f468ffdbed.1753119043.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To ensure only the current test is skipped on permission failure, instead
of terminating the entire test binary.
Link: https://lkml.kernel.org/r/20250717131857.59909-3-lianux.mm@gmail.com
Signed-off-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|