#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # +-----------------------+ +------------------------+ # | H1 (vrf) | | H2 (vrf) | # | + $h1.10 | | + $h2.10 | # | | 192.0.2.1/28 | | | 192.0.2.2/28 | # | | | | | | # | | + $h1.20 | | | + $h2.20 | # | \ | 198.51.100.1/24 | | \ | 198.51.100.2/24 | # | \| | | \| | # | + $h1 | | + $h2 | # +----|------------------+ +----|-------------------+ # | | # +----|--------------------------------------------------|-------------------+ # | SW | | | # | +--|--------------------------------------------------|-----------------+ | # | | + $swp1 BR1 (802.1q) + $swp2 | | # | | vid 10 vid 10 | | # | | vid 20 vid 20 | | # | | | | # | | + vx10 (vxlan) + vx20 (vxlan) | | # | | local 192.0.2.17 local 192.0.2.17 | | # | | remote 192.0.2.34 192.0.2.50 remote 192.0.2.34 192.0.2.50 | | # | | id 1000 dstport $VXPORT id 2000 dstport $VXPORT | | # | | vid 10 pvid untagged vid 20 pvid untagged | | # | +-----------------------------------------------------------------------+ | # | | # | 192.0.2.32/28 via 192.0.2.18 | # | 192.0.2.48/28 via 192.0.2.18 | # | | # | + $rp1 | # | | 192.0.2.17/28 | # +----|----------------------------------------------------------------------+ # | # +----|--------------------------------------------------------+ # | | VRP2 (vrf) | # | + $rp2 | # | 192.0.2.18/28 | # | | (maybe) HW # ============================================================================= # | | (likely) SW # | + v1 (veth) + v3 (veth) | # | | 192.0.2.33/28 | 192.0.2.49/28 | # +----|---------------------------------------|----------------+ # | | # +----|------------------------------+ +----|------------------------------+ # | + v2 (veth) NS1 (netns) | | + v4 (veth) NS2 (netns) | # | 192.0.2.34/28 | | 192.0.2.50/28 | # | | | | # | 192.0.2.16/28 via 192.0.2.33 | | 192.0.2.16/28 via 192.0.2.49 | # | 192.0.2.50/32 via 192.0.2.33 | | 192.0.2.34/32 via 192.0.2.49 | # | | | | # | +-------------------------------+ | | +-------------------------------+ | # | | BR2 (802.1q) | | | | BR2 (802.1q) | | # | | + vx10 (vxlan) | | | | + vx10 (vxlan) | | # | | local 192.0.2.34 | | | | local 192.0.2.50 | | # | | remote 192.0.2.17 | | | | remote 192.0.2.17 | | # | | remote 192.0.2.50 | | | | remote 192.0.2.34 | | # | | id 1000 dstport $VXPORT | | | | id 1000 dstport $VXPORT | | # | | vid 10 pvid untagged | | | | vid 10 pvid untagged | | # | | | | | | | | # | | + vx20 (vxlan) | | | | + vx20 (vxlan) | | # | | local 192.0.2.34 | | | | local 192.0.2.50 | | # | | remote 192.0.2.17 | | | | remote 192.0.2.17 | | # | | remote 192.0.2.50 | | | | remote 192.0.2.34 | | # | | id 2000 dstport $VXPORT | | | | id 2000 dstport $VXPORT | | # | | vid 20 pvid untagged | | | | vid 20 pvid untagged | | # | | | | | | | | # | | + w1 (veth) | | | | + w1 (veth) | | # | | | vid 10 | | | | | vid 10 | | # | | | vid 20 | | | | | vid 20 | | # | +--|----------------------------+ | | +--|----------------------------+ | # | | | | | | # | +--|----------------------------+ | | +--|----------------------------+ | # | | + w2 (veth) VW2 (vrf) | | | | + w2 (veth) VW2 (vrf) | | # | | |\ | | | | |\ | | # | | | + w2.10 | | | | | + w2.10 | | # | | | 192.0.2.3/28 | | | | | 192.0.2.4/28 | | # | | | | | | | | | | # | | + w2.20 | | | | + w2.20 | | # | | 198.51.100.3/24 | | | | 198.51.100.4/24 | | # | +-------------------------------+ | | +-------------------------------+ | # +-----------------------------------+ +-----------------------------------+ : ${VXPORT:=4789} export VXPORT : ${ALL_TESTS:=" ping_ipv4 test_flood test_unicast reapply_config ping_ipv4 test_flood test_unicast test_learning test_pvid "} NUM_NETIFS=6 source lib.sh h1_create() { simple_if_init $h1 tc qdisc add dev $h1 clsact vlan_create $h1 10 v$h1 192.0.2.1/28 vlan_create $h1 20 v$h1 198.51.100.1/24 } h1_destroy() { vlan_destroy $h1 20 vlan_destroy $h1 10 tc qdisc del dev $h1 clsact simple_if_fini $h1 } h2_create() { simple_if_init $h2 tc qdisc add dev $h2 clsact vlan_create $h2 10 v$h2 192.0.2.2/28 vlan_create $h2 20 v$h2 198.51.100.2/24 } h2_destroy() { vlan_destroy $h2 20 vlan_destroy $h2 10 tc qdisc del dev $h2 clsact simple_if_fini $h2 } rp1_set_addr() { ip address add dev $rp1 192.0.2.17/28 ip route add 192.0.2.32/28 nexthop via 192.0.2.18 ip route add 192.0.2.48/28 nexthop via 192.0.2.18 } rp1_unset_addr() { ip route del 192.0.2.48/28 nexthop via 192.0.2.18 ip route del 192.0.2.32/28 nexthop via 192.0.2.18 ip address del dev $rp1 192.0.2.17/28 } switch_create() { ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \ mcast_snooping 0 # Make sure the bridge uses the MAC address of the local port and not # that of the VxLAN's device. ip link set dev br1 address $(mac_get $swp1) ip link set dev br1 up ip link set dev $rp1 up rp1_set_addr ip link add name vx10 type vxlan id 1000 \ local 192.0.2.17 dstport "$VXPORT" \ nolearning noudpcsum tos inherit ttl 100 ip link set dev vx10 up ip link set dev vx10 master br1 bridge vlan add vid 10 dev vx10 pvid untagged ip link add name vx20 type vxlan id 2000 \ local 192.0.2.17 dstport "$VXPORT" \ nolearning noudpcsum tos inherit ttl 100 ip link set dev vx20 up ip link set dev vx20 master br1 bridge vlan add vid 20 dev vx20 pvid untagged ip link set dev $swp1 master br1 ip link set dev $swp1 up bridge vlan add vid 10 dev $swp1 bridge vlan add vid 20 dev $swp1 ip link set dev $swp2 master br1 ip link set dev $swp2 up bridge vlan add vid 10 dev $swp2 bridge vlan add vid 20 dev $swp2 bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self } switch_destroy() { bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self bridge vlan del vid 20 dev $swp2 bridge vlan del vid 10 dev $swp2 ip link set dev $swp2 down ip link set dev $swp2 nomaster bridge vlan del vid 20 dev $swp1 bridge vlan del vid 10 dev $swp1 ip link set dev $swp1 down ip link set dev $swp1 nomaster bridge vlan del vid 20 dev vx20 ip link set dev vx20 nomaster ip link set dev vx20 down ip link del dev vx20 bridge vlan del vid 10 dev vx10 ip link set dev vx10 nomaster ip link set dev vx10 down ip link del dev vx10 rp1_unset_addr ip link set dev $rp1 down ip link set dev br1 down ip link del dev br1 } vrp2_create() { simple_if_init $rp2 192.0.2.18/28 __simple_if_init v1 v$rp2 192.0.2.33/28 __simple_if_init v3 v$rp2 192.0.2.49/28 tc qdisc add dev v1 clsact } vrp2_destroy() { tc qdisc del dev v1 clsact __simple_if_fini v3 192.0.2.49/28 __simple_if_fini v1 192.0.2.33/28 simple_if_fini $rp2 192.0.2.18/28 } ns_init_common() { local in_if=$1; shift local in_addr=$1; shift local other_in_addr=$1; shift local nh_addr=$1; shift local host_addr1=$1; shift local host_addr2=$1; shift ip link set dev $in_if up ip address add dev $in_if $in_addr/28 tc qdisc add dev $in_if clsact ip link add name br2 type bridge vlan_filtering 1 vlan_default_pvid 0 ip link set dev br2 up ip link add name w1 type veth peer name w2 ip link set dev w1 master br2 ip link set dev w1 up bridge vlan add vid 10 dev w1 bridge vlan add vid 20 dev w1 ip link add name vx10 type vxlan id 1000 local $in_addr \ dstport "$VXPORT" ip link set dev vx10 up bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.17 self bridge fdb append dev vx10 00:00:00:00:00:00 dst $other_in_addr self ip link set dev vx10 master br2 tc qdisc add dev vx10 clsact bridge vlan add vid 10 dev vx10 pvid untagged ip link add name vx20 type vxlan id 2000 local $in_addr \ dstport "$VXPORT" ip link set dev vx20 up bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.17 self bridge fdb append dev vx20 00:00:00:00:00:00 dst $other_in_addr self ip link set dev vx20 master br2 tc qdisc add dev vx20 clsact bridge vlan add vid 20 dev vx20 pvid untagged simple_if_init w2 vlan_create w2 10 vw2 $host_addr1/28 vlan_create w2 20 vw2 $host_addr2/24 ip route add 192.0.2.16/28 nexthop via $nh_addr ip route add $other_in_addr/32 nexthop via $nh_addr } export -f ns_init_common ns1_create() { ip netns add ns1 ip link set dev v2 netns ns1 in_ns ns1 \ ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3 \ 198.51.100.3 } ns1_destroy() { ip netns exec ns1 ip link set dev v2 netns 1 ip netns del ns1 } ns2_create() { ip netns add ns2 ip link set dev v4 netns ns2 in_ns ns2 \ ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4 \ 198.51.100.4 } ns2_destroy() { ip netns exec ns2 ip link set dev v4 netns 1 ip netns del ns2 } setup_prepare() { h1=${NETIFS[p1]} swp1=${NETIFS[p2]} swp2=${NETIFS[p3]} h2=${NETIFS[p4]} rp1=${NETIFS[p5]} rp2=${NETIFS[p6]} vrf_prepare forwarding_enable h1_create h2_create switch_create ip link add name v1 type veth peer name v2 ip link add name v3 type veth peer name v4 vrp2_create ns1_create ns2_create r1_mac=$(in_ns ns1 mac_get w2) r2_mac=$(in_ns ns2 mac_get w2) h2_mac=$(mac_get $h2) } cleanup() { pre_cleanup ns2_destroy ns1_destroy vrp2_destroy ip link del dev v3 ip link del dev v1 switch_destroy h2_destroy h1_destroy forwarding_restore vrf_cleanup } # For the first round of tests, vx10 and vx20 were the first devices to get # attached to the bridge, and that at the point that the local IP is already # configured. Try the other scenario of attaching these devices to a bridge # that already has local ports members, and only then assign the local IP. reapply_config() { log_info "Reapplying configuration" bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self ip link set dev vx20 nomaster ip link set dev vx10 nomaster rp1_unset_addr sleep 5 ip link set dev vx10 master br1 bridge vlan add vid 10 dev vx10 pvid untagged ip link set dev vx20 master br1 bridge vlan add vid 20 dev vx20 pvid untagged bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self rp1_set_addr sleep 5 } ping_ipv4() { ping_test $h1.10 192.0.2.2 ": local->local vid 10" ping_test $h1.20 198.51.100.2 ": local->local vid 20" ping_test $h1.10 192.0.2.3 ": local->remote 1 vid 10" ping_test $h1.10 192.0.2.4 ": local->remote 2 vid 10" ping_test $h1.20 198.51.100.3 ": local->remote 1 vid 20" ping_test $h1.20 198.51.100.4 ": local->remote 2 vid 20" } maybe_in_ns() { echo ${1:+in_ns} $1 } __flood_counter_add_del() { local add_del=$1; shift local dev=$1; shift local ns=$1; shift # Putting the ICMP capture both to HW and to SW will end up # double-counting the packets that are trapped to slow path, such as for # the unicast test. Adding either skip_hw or skip_sw fixes this problem, # but with skip_hw, the flooded packets are not counted at all, because # those are dropped due to MAC address mismatch; and skip_sw is a no-go # for veth-based topologies. # # So try to install with skip_sw and fall back to skip_sw if that fails. $(maybe_in_ns $ns) __icmp_capture_add_del \ $add_del 100 "" $dev skip_sw 2>/dev/null || \ $(maybe_in_ns $ns) __icmp_capture_add_del \ $add_del 100 "" $dev skip_hw } flood_counter_install() { __flood_counter_add_del add "$@" } flood_counter_uninstall() { __flood_counter_add_del del "$@" } flood_fetch_stat() { local dev=$1; shift local ns=$1; shift $(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress } flood_fetch_stats() { local counters=("${@}") local counter for counter in "${counters[@]}"; do flood_fetch_stat $counter done } vxlan_flood_test() { local mac=$1; shift local dst=$1; shift local vid=$1; shift local -a expects=("${@}") local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2") local counter local key # Packets reach the local host tagged whereas they reach the VxLAN # devices untagged. In order to be able to use the same filter for # all counters, make sure the packets also reach the local host # untagged bridge vlan add vid $vid dev $swp2 untagged for counter in "${counters[@]}"; do flood_counter_install $counter done local -a t0s=($(flood_fetch_stats "${counters[@]}")) $MZ $h1 -Q $vid -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q sleep 1 local -a t1s=($(flood_fetch_stats "${counters[@]}")) for key in ${!t0s[@]}; do local delta=$((t1s[$key] - t0s[$key])) local expect=${expects[$key]} ((expect == delta)) check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta." done for counter in "${counters[@]}"; do flood_counter_uninstall $counter done bridge vlan add vid $vid dev $swp2 } __test_flood() { local mac=$1; shift local dst=$1; shift local vid=$1; shift local what=$1; shift local -a expects=("${@}") RET=0 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: $what" } test_flood() { __test_flood de:ad:be:ef:13:37 192.0.2.100 10 "flood vlan 10" \ 10 10 0 10 0 __test_flood ca:fe:be:ef:13:37 198.51.100.100 20 "flood vlan 20" \ 10 0 10 0 10 } vxlan_fdb_add_del() { local add_del=$1; shift local vid=$1; shift local mac=$1; shift local dev=$1; shift local dst=$1; shift bridge fdb $add_del dev $dev $mac self static permanent \ ${dst:+dst} $dst 2>/dev/null bridge fdb $add_del dev $dev $mac master static vlan $vid 2>/dev/null } __test_unicast() { local mac=$1; shift local dst=$1; shift local hit_idx=$1; shift local vid=$1; shift local what=$1; shift RET=0 local -a expects=(0 0 0 0 0) expects[$hit_idx]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: $what" } test_unicast() { local -a targets=("$h2_mac $h2" "$r1_mac vx10 192.0.2.34" "$r2_mac vx10 192.0.2.50") local target log_info "unicast vlan 10" for target in "${targets[@]}"; do vxlan_fdb_add_del add 10 $target done __test_unicast $h2_mac 192.0.2.2 0 10 "local MAC unicast" __test_unicast $r1_mac 192.0.2.3 1 10 "remote MAC 1 unicast" __test_unicast $r2_mac 192.0.2.4 3 10 "remote MAC 2 unicast" for target in "${targets[@]}"; do vxlan_fdb_add_del del 10 $target done log_info "unicast vlan 20" targets=("$h2_mac $h2" "$r1_mac vx20 192.0.2.34" \ "$r2_mac vx20 192.0.2.50") for target in "${targets[@]}"; do vxlan_fdb_add_del add 20 $target done __test_unicast $h2_mac 198.51.100.2 0 20 "local MAC unicast" __test_unicast $r1_mac 198.51.100.3 2 20 "remote MAC 1 unicast" __test_unicast $r2_mac 198.51.100.4 4 20 "remote MAC 2 unicast" for target in "${targets[@]}"; do vxlan_fdb_add_del del 20 $target done } test_pvid() { local -a expects=(0 0 0 0 0) local mac=de:ad:be:ef:13:37 local dst=192.0.2.100 local vid=10 # Check that flooding works RET=0 expects[0]=10; expects[1]=10; expects[3]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: flood before pvid off" # Toggle PVID off and test that flood to remote hosts does not work RET=0 bridge vlan add vid 10 dev vx10 expects[0]=10; expects[1]=0; expects[3]=0 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: flood after pvid off" # Toggle PVID on and test that flood to remote hosts does work RET=0 bridge vlan add vid 10 dev vx10 pvid untagged expects[0]=10; expects[1]=10; expects[3]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: flood after pvid on" # Add a new VLAN and test that it does not affect flooding RET=0 bridge vlan add vid 30 dev vx10 expects[0]=10; expects[1]=10; expects[3]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" bridge vlan del vid 30 dev vx10 log_test "VXLAN: flood after vlan add" # Remove currently mapped VLAN and test that flood to remote hosts does # not work RET=0 bridge vlan del vid 10 dev vx10 expects[0]=10; expects[1]=0; expects[3]=0 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: flood after vlan delete" # Re-add the VLAN and test that flood to remote hosts does work RET=0 bridge vlan add vid 10 dev vx10 pvid untagged expects[0]=10; expects[1]=10; expects[3]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: flood after vlan re-add" } __test_learning() { local -a expects=(0 0 0 0 0) local mac=$1; shift local dst=$1; shift local vid=$1; shift local idx1=$1; shift local idx2=$1; shift local vx=vx$vid # Check that flooding works RET=0 expects[0]=10; expects[$idx1]=10; expects[$idx2]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: flood before learning" # Send a packet with source mac set to $mac from host w2 and check that # a corresponding entry is created in the VxLAN device RET=0 in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \ -B $dst -t icmp -q sleep 1 bridge fdb show brport $vx | grep $mac | grep -q self check_err $? bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \ | grep -q -v self check_err $? log_test "VXLAN: show learned FDB entry" # Repeat first test and check that packets only reach host w2 in ns1 RET=0 expects[0]=0; expects[$idx1]=10; expects[$idx2]=0 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: learned FDB entry" # Delete the learned FDB entry from the VxLAN and bridge devices and # check that packets are flooded RET=0 bridge fdb del dev $vx $mac master self vlan $vid sleep 1 expects[0]=10; expects[$idx1]=10; expects[$idx2]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: deletion of learned FDB entry" # Re-learn the first FDB entry and check that it is correctly aged-out RET=0 in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \ -B $dst -t icmp -q sleep 1 bridge fdb show brport $vx | grep $mac | grep -q self check_err $? bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \ | grep -q -v self check_err $? expects[0]=0; expects[$idx1]=10; expects[$idx2]=0 vxlan_flood_test $mac $dst $vid "${expects[@]}" sleep 20 bridge fdb show brport $vx | grep $mac | grep -q self check_fail $? bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \ | grep -q -v self check_fail $? expects[0]=10; expects[$idx1]=10; expects[$idx2]=10 vxlan_flood_test $mac $dst $vid "${expects[@]}" log_test "VXLAN: Ageing of learned FDB entry" # Toggle learning on the bridge port and check that the bridge's FDB # is populated only when it should RET=0 ip link set dev $vx type bridge_slave learning off in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \ -B $dst -t icmp -q sleep 1 bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \ | grep -q -v self check_fail $? ip link set dev $vx type bridge_slave learning on in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \ -B $dst -t icmp -q sleep 1 bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \ | grep -q -v self check_err $? log_test "VXLAN: learning toggling on bridge port" } test_learning() { local mac=de:ad:be:ef:13:37 local dst=192.0.2.100 local vid=10 # Enable learning on the VxLAN devices and set ageing time to 10 seconds ip link set dev br1 type bridge ageing_time 1000 ip link set dev vx10 type vxlan ageing 10 ip link set dev vx10 type vxlan learning ip link set dev vx20 type vxlan ageing 10 ip link set dev vx20 type vxlan learning reapply_config log_info "learning vlan 10" __test_learning $mac $dst $vid 1 3 log_info "learning vlan 20" mac=ca:fe:be:ef:13:37 dst=198.51.100.100 vid=20 __test_learning $mac $dst $vid 2 4 # Restore previous settings ip link set dev vx20 type vxlan nolearning ip link set dev vx20 type vxlan ageing 300 ip link set dev vx10 type vxlan nolearning ip link set dev vx10 type vxlan ageing 300 ip link set dev br1 type bridge ageing_time 30000 reapply_config } test_all() { log_info "Running tests with UDP port $VXPORT" tests_run } trap cleanup EXIT setup_prepare setup_wait test_all exit $EXIT_STATUS