diff options
| author | Olof Johansson <olof@lixom.net> | 2020-01-10 22:17:22 -0800 |
|---|---|---|
| committer | Olof Johansson <olof@lixom.net> | 2020-01-10 22:17:43 -0800 |
| commit | 37365e152a72f346b8ebe1c6526b3a602360b8be (patch) | |
| tree | 4263ec6f73a0c06f56ac5ea1603fff96a41a3597 | |
| parent | 031a612b16c214528554d269e9907767770a9304 (diff) | |
| parent | f8849332aeda1c3a28a0d1bfcaff90e089d0ebcf (diff) | |
Merge tag 'stm32-dt-for-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.6, round 1
Highlights:
----------
MPU part:
-Add PWM support on DK2 board.
-Add counter support to STM32 timers.
-Add support of SDMMC 2&3 instances based on "arm,pl18x". SDMMC2 is
connected to eMMC on ED1 board. SDMMC3 is connected to the GPIO
extension connector on EV1 & DKx boards.
-Add ADC support on ED1 board.
-Update devicetree files split to better fit to STM32MP15 SOC & boards
diversity.
-Fix issues seen during YAML validation.
-Enable Ethernet (MAC) TX clock gating during low-power mode.
-Enable USB OTG HS support on DKx boards.
-Enable USB Host EHCI on DKx boards.
MCU part:
-Fix issues seen during YAML validation.
* tag 'stm32-dt-for-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (37 commits)
ARM: dts: stm32: Add power-supply for RGB panel on stm32429i-eval
ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco
ARM: dts: stm32: change nvmem node name on stm32mp1
ARM: dts: stm32: change nvmem node name on stm32f429
ARM: dts: stm32: update mlahb node according to the bindings on stm32mp15
ARM: dts: stm32: fix dma controller node name on stm32mp157c
ARM: dts: stm32: fix dma controller node name on stm32f743
ARM: dts: stm32: fix dma controller node name on stm32f746
ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1
ARM: dts: stm32: enable USB OTG HS on stm32mp15 DKx boards
ARM: dts: stm32: enable USB Host (USBH) EHCI controller on stm32mp15 DKx
ARM: dts: stm32: enable USBPHYC on stm32mp15 DKx boards
ARM: dts: stm32: remove useless clock-names from RTC node on stm32f746
ARM: dts: stm32: remove useless clock-names from RTC node on stm32f429
ARM: dts: stm32: Enable MAC TX clock gating during TX low-power mode on stm32mp15
ARM: dts: stm32: adjust slew rate for Ethernet on stm32mp15
ARM: dts: stm32: remove syscfg clock on stm32mp15 ethernet
ARM: dts: stm32: remove "@" and "_" from stm32f7 pinmux groups
ARM: dts: stm32: remove "@" and "_" from stm32f4 pinmux groups
ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity
...
Link: https://lore.kernel.org/r/39df1dee-3c9f-cd35-bc55-a71223e07100@st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
27 files changed, 2435 insertions, 1853 deletions
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 58288aa53fee..c27fa355e5ab 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -95,6 +95,13 @@ regulator-max-microvolt = <3300000>; }; + vdd_panel: vdd-panel { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + leds { compatible = "gpio-leds"; green { @@ -138,6 +145,7 @@ panel_rgb: panel-rgb { compatible = "ampire,am-480272h3tmqw-t01h"; + power-supply = <&vdd_panel>; status = "okay"; port { panel_in_rgb: endpoint { diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 35202896c093..392fa143ce07 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -163,7 +163,7 @@ st,bank-name = "GPIOK"; }; - usart1_pins_a: usart1@0 { + usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ bias-disable; @@ -176,7 +176,7 @@ }; }; - usart3_pins_a: usart3@0 { + usart3_pins_a: usart3-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ bias-disable; @@ -189,7 +189,7 @@ }; }; - usbotg_fs_pins_a: usbotg_fs@0 { + usbotg_fs_pins_a: usbotg-fs-0 { pins { pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */ <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */ @@ -200,7 +200,7 @@ }; }; - usbotg_fs_pins_b: usbotg_fs@1 { + usbotg_fs_pins_b: usbotg-fs-1 { pins { pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */ <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */ @@ -211,7 +211,7 @@ }; }; - usbotg_hs_pins_a: usbotg_hs@0 { + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/ <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */ @@ -231,7 +231,7 @@ }; }; - ethernet_mii: mii@0 { + ethernet_mii: mii-0 { pins { pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */ <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */ @@ -251,13 +251,13 @@ }; }; - adc3_in8_pin: adc@200 { + adc3_in8_pin: adc-200 { pins { pinmux = <STM32_PINMUX('F', 10, ANALOG)>; }; }; - pwm1_pins: pwm@1 { + pwm1_pins: pwm-1 { pins { pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */ <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */ @@ -265,14 +265,14 @@ }; }; - pwm3_pins: pwm@3 { + pwm3_pins: pwm-3 { pins { pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */ <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */ }; }; - i2c1_pins: i2c1@0 { + i2c1_pins: i2c1-0 { pins { pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */ <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */ @@ -282,7 +282,7 @@ }; }; - ltdc_pins: ltdc@0 { + ltdc_pins: ltdc-0 { pins { pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ @@ -316,7 +316,7 @@ }; }; - dcmi_pins: dcmi@0 { + dcmi_pins: dcmi-0 { pins { pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */ <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */ @@ -339,7 +339,7 @@ }; }; - sdio_pins: sdio_pins@0 { + sdio_pins: sdio-pins-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ @@ -352,7 +352,7 @@ }; }; - sdio_pins_od: sdio_pins_od@0 { + sdio_pins_od: sdio-pins-od-0 { pins1 { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 5c8a826b3195..d7770699feb5 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -80,7 +80,7 @@ }; soc { - romem: nvmem@1fff7800 { + romem: efuse@1fff7800 { compatible = "st,stm32f4-otp"; reg = <0x1fff7800 0x400>; #address-cells = <1>; @@ -318,7 +318,6 @@ compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; clocks = <&rcc 1 CLK_RTC>; - clock-names = "ck_rtc"; assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; @@ -789,7 +788,6 @@ rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; - interrupts = <80>; clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index f3ce477b7bae..9397db0c43de 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -76,6 +76,13 @@ regulator-max-microvolt = <3300000>; }; + vdd_dsi: vdd-dsi { + compatible = "regulator-fixed"; + regulator-name = "vdd_dsi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; @@ -155,6 +162,7 @@ compatible = "orisetech,otm8009a"; reg = <0>; /* dsi virtual channel (0..3) */ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + power-supply = <&vdd_dsi>; status = "okay"; port { diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 9314128df185..fe4cfda72a47 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -127,7 +127,7 @@ st,bank-name = "GPIOK"; }; - cec_pins_a: cec@0 { + cec_pins_a: cec-0 { pins { pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */ slew-rate = <0>; @@ -136,7 +136,7 @@ }; }; - usart1_pins_a: usart1@0 { + usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ bias-disable; @@ -149,7 +149,7 @@ }; }; - usart1_pins_b: usart1@1 { + usart1_pins_b: usart1-1 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ bias-disable; @@ -162,7 +162,7 @@ }; }; - i2c1_pins_b: i2c1@0 { + i2c1_pins_b: i2c1-0 { pins { pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */ <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */ @@ -172,7 +172,7 @@ }; }; - usbotg_hs_pins_a: usbotg-hs@0 { + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */ @@ -192,7 +192,7 @@ }; }; - usbotg_hs_pins_b: usbotg-hs@1 { + usbotg_hs_pins_b: usbotg-hs-1 { pins { pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */ @@ -212,7 +212,7 @@ }; }; - usbotg_fs_pins_a: usbotg-fs@0 { + usbotg_fs_pins_a: usbotg-fs-0 { pins { pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */ <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */ @@ -223,7 +223,7 @@ }; }; - sdio_pins_a: sdio_pins_a@0 { + sdio_pins_a: sdio-pins-a-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */ @@ -236,7 +236,7 @@ }; }; - sdio_pins_od_a: sdio_pins_od_a@0 { + sdio_pins_od_a: sdio-pins-od-a-0 { pins1 { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */ @@ -254,7 +254,7 @@ }; }; - sdio_pins_b: sdio_pins_b@0 { + sdio_pins_b: sdio-pins-b-0 { pins { pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */ <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */ @@ -267,7 +267,7 @@ }; }; - sdio_pins_od_b: sdio_pins_od_b@0 { + sdio_pins_od_b: sdio-pins-od-b-0 { pins1 { pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */ <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */ diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index d26f93f8b9c2..93c063796780 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -300,7 +300,6 @@ compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; clocks = <&rcc 1 CLK_RTC>; - clock-names = "ck_rtc"; assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; @@ -587,7 +586,7 @@ assigned-clock-rates = <1000000>; }; - dma1: dma@40026000 { + dma1: dma-controller@40026000 { compatible = "st,stm32-dma"; reg = <0x40026000 0x400>; interrupts = <11>, @@ -603,7 +602,7 @@ status = "disabled"; }; - dma2: dma@40026400 { + dma2: dma-controller@40026400 { compatible = "st,stm32-dma"; reg = <0x40026400 0x400>; interrupts = <56>, diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index c065266ee377..05eb02e6d083 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -231,7 +231,7 @@ status = "disabled"; }; - dma1: dma@40020000 { + dma1: dma-controller@40020000 { compatible = "st,stm32-dma"; reg = <0x40020000 0x400>; interrupts = <11>, @@ -249,7 +249,7 @@ status = "disabled"; }; - dma2: dma@40020400 { + dma2: dma-controller@40020400 { compatible = "st,stm32-dma"; reg = <0x40020400 0x400>; interrupts = <56>, @@ -329,7 +329,7 @@ status = "disabled"; }; - mdma1: dma@52000000 { + mdma1: dma-controller@52000000 { compatible = "st,stm32h7-mdma"; reg = <0x52000000 0x1000>; interrupts = <122>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi new file mode 100644 index 000000000000..0237d4ddaa92 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -0,0 +1,1092 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + adc1_in6_pins_a: adc1-in6 { + pins { + pinmux = <STM32_PINMUX('F', 12, ANALOG)>; + }; + }; + + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ + <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ + <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ + }; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>; + }; + }; + + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + fmc_pins_a: fmc-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ + <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */ + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */ + }; + }; + + pwm3_pins_a: pwm3-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */ + }; + }; + + pwm4_pins_b: pwm4-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_b: pwm4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ + }; + }; + + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */ + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_pins_b: sdmmc2-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc3_b4_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; +}; + +&pinctrl_z { + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index ed8b258256d7..fb41d0778b00 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -20,12 +20,6 @@ device_type = "cpu"; reg = <0>; }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; }; psci { @@ -148,6 +142,11 @@ reg = <1>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers3: timer@40001000 { @@ -177,6 +176,11 @@ reg = <2>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers4: timer@40002000 { @@ -204,6 +208,11 @@ reg = <3>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers5: timer@40003000 { @@ -233,6 +242,11 @@ reg = <4>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers6: timer@40004000 { @@ -589,6 +603,11 @@ reg = <0>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers8: timer@44001000 { @@ -620,6 +639,11 @@ reg = <7>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; usart6: serial@44003000 { @@ -923,33 +947,7 @@ }; }; - m_can1: can@4400e000 { - compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x1400>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - m_can2: can@4400f000 { - compatible = "bosch,m_can"; - reg = <0x4400f000 0x400>, <0x44011000 0x2800>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - dma1: dma@48000000 { + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -966,7 +964,7 @@ dma-requests = <8>; }; - dma2: dma@48001000 { + dma2: dma-controller@48001000 { compatible = "st,stm32-dma"; reg = <0x48001000 0x400>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, @@ -1030,6 +1028,21 @@ }; }; + sdmmc3: sdmmc@48004000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x48004000 0x400>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC3_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC3_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + usbotg_hs: usb-otg@49000000 { compatible = "snps,dwc2"; reg = <0x49000000 0x10000>; @@ -1242,15 +1255,6 @@ status = "disabled"; }; - cryp1: cryp@54001000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54001000 0x400>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; - hash1: hash@54002000 { compatible = "st,stm32f756-hash"; reg = <0x54002000 0x400>; @@ -1271,7 +1275,7 @@ status = "disabled"; }; - mdma1: dma@58000000 { + mdma1: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; @@ -1318,13 +1322,29 @@ arm,primecell-periphid = <0x10153180>; reg = <0x58005000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <120000000>; + status = "disabled"; + }; + + sdmmc2: sdmmc@58007000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x58007000 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC2_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC2_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; }; crc1: crc@58009000 { @@ -1349,16 +1369,15 @@ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx", - "ethstp", - "syscfg-clk"; + "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, - <&rcc ETHSTP>, - <&rcc SYSCFG>; + <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; snps,pbl = <2>; + snps,en-tx-lpi-clockgating; snps,axi-config = <&stmmac_axi_config_0>; snps,tso; status = "disabled"; @@ -1383,26 +1402,6 @@ status = "disabled"; }; - gpu: gpu@59000000 { - compatible = "vivante,gc"; - reg = <0x59000000 0x800>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc GPU>, <&rcc GPU_K>; - clock-names = "bus" ,"core"; - resets = <&rcc GPU_R>; - status = "disabled"; - }; - - dsi: dsi@5a000000 { - compatible = "st,stm32-dsi"; - reg = <0x5a000000 0x800>; - clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; - clock-names = "pclk", "ref", "px_clk"; - resets = <&rcc DSI_R>; - reset-names = "apb"; - status = "disabled"; - }; - ltdc: display-controller@5a001000 { compatible = "st,stm32-ltdc"; reg = <0x5a001000 0x400>; @@ -1486,7 +1485,7 @@ status = "disabled"; }; - bsec: nvmem@5c005000 { + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; #address-cells = <1>; @@ -1511,12 +1510,170 @@ #size-cells = <0>; status = "disabled"; }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + }; }; - mlahb { - compatible = "simple-bus"; + mlahb: ahb { + compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges; dma-ranges = <0x00000000 0x38000000 0x10000>, <0x10000000 0x10000000 0x60000>, <0x30000000 0x30000000 0x60000>; diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi new file mode 100644 index 000000000000..2d759fc6015c --- /dev/null +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp151.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi deleted file mode 100644 index 3d1ecb408b03..000000000000 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ /dev/null @@ -1,953 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2017 - All Rights Reserved - * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. - */ -#include <dt-bindings/pinctrl/stm32-pinfunc.h> - -/ { - soc { - pinctrl: pin-controller@50002000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-pinctrl"; - ranges = <0 0x50002000 0xa400>; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - pins-are-numbered; - - gpioa: gpio@50002000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc GPIOA>; - st,bank-name = "GPIOA"; - status = "disabled"; - }; - - gpiob: gpio@50003000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc GPIOB>; - st,bank-name = "GPIOB"; - status = "disabled"; - }; - - gpioc: gpio@50004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc GPIOC>; - st,bank-name = "GPIOC"; - status = "disabled"; - }; - - gpiod: gpio@50005000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x400>; - clocks = <&rcc GPIOD>; - st,bank-name = "GPIOD"; - status = "disabled"; - }; - - gpioe: gpio@50006000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x400>; - clocks = <&rcc GPIOE>; - st,bank-name = "GPIOE"; - status = "disabled"; - }; - - gpiof: gpio@50007000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x400>; - clocks = <&rcc GPIOF>; - st,bank-name = "GPIOF"; - status = "disabled"; - }; - - gpiog: gpio@50008000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x400>; - clocks = <&rcc GPIOG>; - st,bank-name = "GPIOG"; - status = "disabled"; - }; - - gpioh: gpio@50009000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x400>; - clocks = <&rcc GPIOH>; - st,bank-name = "GPIOH"; - status = "disabled"; - }; - - gpioi: gpio@5000a000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x400>; - clocks = <&rcc GPIOI>; - st,bank-name = "GPIOI"; - status = "disabled"; - }; - - gpioj: gpio@5000b000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x400>; - clocks = <&rcc GPIOJ>; - st,bank-name = "GPIOJ"; - status = "disabled"; - }; - - gpiok: gpio@5000c000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xa000 0x400>; - clocks = <&rcc GPIOK>; - st,bank-name = "GPIOK"; - status = "disabled"; - }; - - adc12_ain_pins_a: adc12-ain-0 { - pins { - pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ - <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ - <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ - <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ - }; - }; - - adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { - pins { - pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ - <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ - }; - }; - - cec_pins_a: cec-0 { - pins { - pinmux = <STM32_PINMUX('A', 15, AF4)>; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_a: cec-sleep-0 { - pins { - pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ - }; - }; - - cec_pins_b: cec-1 { - pins { - pinmux = <STM32_PINMUX('B', 6, AF5)>; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_b: cec-sleep-1 { - pins { - pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ - }; - }; - - dac_ch1_pins_a: dac-ch1 { - pins { - pinmux = <STM32_PINMUX('A', 4, ANALOG)>; - }; - }; - - dac_ch2_pins_a: dac-ch2 { - pins { - pinmux = <STM32_PINMUX('A', 5, ANALOG)>; - }; - }; - - dcmi_pins_a: dcmi-0 { - pins { - pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ - <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ - <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ - <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ - <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ - <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ - <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ - <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ - <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ - <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ - <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ - <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ - <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ - <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ - <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ - bias-disable; - }; - }; - - dcmi_sleep_pins_a: dcmi-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ - <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ - <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ - <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ - <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ - <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ - <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ - <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ - <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ - <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ - <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ - <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ - <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ - <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ - <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ - }; - }; - - ethernet0_rgmii_pins_a: rgmii-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ - <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ - <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ - <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ - <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ - <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ - <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ - <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ - <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ - <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ - <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ - <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ - bias-disable; - }; - }; - - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ - <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ - <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ - <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ - <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ - <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ - <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ - <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ - <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ - <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ - <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ - <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ - <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ - }; - }; - - fmc_pins_a: fmc-0 { - pins1 { - pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ - <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ - <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ - <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ - <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ - <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ - <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ - <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ - <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ - <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ - <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ - <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ - <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ - bias-pull-up; - }; - }; - - fmc_sleep_pins_a: fmc-sleep-0 { - pins { - pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ - <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ - <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ - <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ - <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ - <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ - <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ - <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ - <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ - <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ - <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ - <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ - <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ - <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ - }; - }; - - i2c1_pins_a: i2c1-0 { - pins { - pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_a: i2c1-1 { - pins { - pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ - }; - }; - - i2c1_pins_b: i2c1-2 { - pins { - pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_b: i2c1-3 { - pins { - pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ - }; - }; - - i2c2_pins_a: i2c2-0 { - pins { - pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ - <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_a: i2c2-1 { - pins { - pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ - <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ - }; - }; - - i2c2_pins_b1: i2c2-2 { - pins { - pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b1: i2c2-3 { - pins { - pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ - }; - }; - - i2c5_pins_a: i2c5-0 { - pins { - pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ - <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c5_pins_sleep_a: i2c5-1 { - pins { - pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ - <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ - - }; - }; - - i2s2_pins_a: i2s2-0 { - pins { - pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ - <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ - <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - }; - - i2s2_pins_sleep_a: i2s2-1 { - pins { - pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ - <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ - <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ - }; - }; - - ltdc_pins_a: ltdc-a-0 { - pins { - pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ - <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ - <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ - <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ - <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ - <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ - <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ - <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ - <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ - <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ - <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ - <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ - <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ - <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ - <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ - <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ - <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ - <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ - <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ - <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ - <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ - <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ - <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ - <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ - <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ - <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ - <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_a: ltdc-a-1 { - pins { - pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ - <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ - <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ - <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ - <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ - <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ - <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ - <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ - <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ - <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ - <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ - <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ - <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ - <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ - <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ - <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ - <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ - <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ - <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ - <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ - <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ - <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ - <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ - <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ - <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ - <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ - <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ - }; - }; - - ltdc_pins_b: ltdc-b-0 { - pins { - pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ - <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ - <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ - <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ - <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ - <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ - <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ - <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ - <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ - <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ - <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ - <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ - <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ - <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ - <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ - <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ - <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ - <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ - <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ - <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ - <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ - <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ - <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ - <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ - <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ - <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ - <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_b: ltdc-b-1 { - pins { - pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ - <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ - <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ - <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ - <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ - <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ - <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ - <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ - <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ - <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ - <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ - <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ - <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ - <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ - <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ - <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ - <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ - <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ - <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ - <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ - <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ - <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ - <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ - <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ - <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ - <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ - <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ - }; - }; - - m_can1_pins_a: m-can1-0 { - pins1 { - pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ - bias-disable; - }; - }; - - m_can1_sleep_pins_a: m_can1-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ - <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ - }; - }; - - pwm2_pins_a: pwm2-0 { - pins { - pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm8_pins_a: pwm8-0 { - pins { - pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm12_pins_a: pwm12-0 { - pins { - pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - qspi_clk_pins_a: qspi-clk-0 { - pins { - pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - }; - - qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ - }; - }; - - qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ - <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ - <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ - <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ - <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ - <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ - <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ - <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ - }; - }; - - qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { - pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ - <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ - <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ - <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ - <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ - <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ - <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ - <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ - }; - }; - - sai2a_pins_a: sai2a-0 { - pins { - pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ - <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ - <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ - <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai2a_sleep_pins_a: sai2a-1 { - pins { - pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ - <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ - <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ - <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ - }; - }; - - sai2b_pins_a: sai2b-0 { - pins1 { - pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ - <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ - <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_a: sai2b-1 { - pins { - pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ - <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ - <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ - <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ - }; - }; - - sai2b_pins_b: sai2b-2 { - pins { - pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_b: sai2b-3 { - pins { - pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ - }; - }; - - sai4a_pins_a: sai4a-0 { - pins { - pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai4a_sleep_pins_a: sai4a-1 { - pins { - pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - pins2{ - pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - pins2{ - pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ - bias-pull-up; - }; - }; - - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ - <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ - }; - }; - - spdifrx_pins_a: spdifrx-0 { - pins { - pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ - bias-disable; - }; - }; - - spdifrx_sleep_pins_a: spdifrx-1 { - pins { - pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ - }; - }; - - uart4_pins_a: uart4-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-disable; - }; - }; - - uart4_pins_b: uart4-1 { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-disable; - }; - }; - - uart7_pins_a: uart7-0 { - pins1 { - pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ - <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ - <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ - bias-disable; - }; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-z-pinctrl"; - ranges = <0 0x54004000 0x400>; - pins-are-numbered; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - - gpioz: gpio@54004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x400>; - clocks = <&rcc GPIOZ>; - st,bank-name = "GPIOZ"; - st,bank-ioport = <11>; - status = "disabled"; - }; - - i2c2_pins_b2: i2c2-0 { - pins { - pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b2: i2c2-1 { - pins { - pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ - }; - }; - - i2c4_pins_a: i2c4-0 { - pins { - pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ - <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c4_pins_sleep_a: i2c4-1 { - pins { - pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ - <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ - }; - }; - - spi1_pins_a: spi1-0 { - pins1 { - pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ - bias-disable; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi new file mode 100644 index 000000000000..3f0a4a91cce6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp153.dtsi" + +/ { + soc { + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 628c74a45a25..cbfa4075907e 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -6,8 +6,9 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 984a47cbd13d..d03d4cd2606a 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -6,10 +6,10 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/st,stpmic1.h> +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; @@ -23,494 +23,4 @@ chosen { stdout-path = "serial0:115200n8"; }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mcuram2: mcuram2@10000000 { - compatible = "shared-dma-pool"; - reg = <0x10000000 0x40000>; - no-map; - }; - - vdev0vring0: vdev0vring0@10040000 { - compatible = "shared-dma-pool"; - reg = <0x10040000 0x1000>; - no-map; - }; - - vdev0vring1: vdev0vring1@10041000 { - compatible = "shared-dma-pool"; - reg = <0x10041000 0x1000>; - no-map; - }; - - vdev0buffer: vdev0buffer@10042000 { - compatible = "shared-dma-pool"; - reg = <0x10042000 0x4000>; - no-map; - }; - - mcuram: mcuram@30000000 { - compatible = "shared-dma-pool"; - reg = <0x30000000 0x40000>; - no-map; - }; - - retram: retram@38000000 { - compatible = "shared-dma-pool"; - reg = <0x38000000 0x10000>; - no-map; - }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; - }; - - led { - compatible = "gpio-leds"; - blue { - label = "heartbeat"; - gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - sound { - compatible = "audio-graph-card"; - label = "STM32MP1-DK"; - routing = - "Playback" , "MCLK", - "Capture" , "MCLK", - "MICL" , "Mic Bias"; - dais = <&sai2a_port &sai2b_port &i2s2_port>; - status = "okay"; - }; -}; - -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; - vdd-supply = <&vdd>; - vdda-supply = <&vdd>; - vref-supply = <&vrefbuf>; - status = "disabled"; - adc1: adc@0 { - /* - * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. - * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: - * 5 * (56 + 47kOhms) * 5pF => 2.5us. - * Use arbitrary margin here (e.g. 5us). - */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; - }; - adc2: adc@100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; - }; -}; - -&cec { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; -}; - -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; - i2c-scl-rising-time-ns = <100>; - i2c-scl-falling-time-ns = <7>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - hdmi-transmitter@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - iovcc-supply = <&v3v3_hdmi>; - cvcc12-supply = <&v1v2_hdmi>; - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpiog>; - #sound-dai-cells = <0>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sii9022_in: endpoint { - remote-endpoint = <<dc_ep0_out>; - }; - }; - - port@3 { - reg = <3>; - sii9022_tx_endpoint: endpoint { - remote-endpoint = <&i2s2_endpoint>; - }; - }; - }; - }; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - #sound-dai-cells = <0>; - VL-supply = <&v3v3>; - VD-supply = <&v1v8_audio>; - VA-supply = <&v1v8_audio>; - VAHP-supply = <&v1v8_audio>; - reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; - clocks = <&sai2a>; - clock-names = "MCLK"; - status = "okay"; - - cs42l51_port: port { - #address-cells = <1>; - #size-cells = <0>; - - cs42l51_tx_endpoint: endpoint@0 { - reg = <0>; - remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; - }; - - cs42l51_rx_endpoint: endpoint@1 { - reg = <1>; - remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; - }; - }; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - ldo1-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO1 0>; - }; - - v3v3_hdmi: ldo2 { - regulator-name = "v3v3_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO2 0>; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = <IT_CURLIM_LDO4 0>; - }; - - vdda: ldo5 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = <IT_CURLIM_LDO5 0>; - regulator-boot-on; - }; - - v1v2_hdmi: ldo6 { - regulator-name = "v1v2_hdmi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO6 0>; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = <IT_OCP_BOOST 0>; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = <IT_OCP_OTG 0>; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge = <1>; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&i2s2 { - clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "i2sclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; - status = "okay"; - - i2s2_port: port { - i2s2_endpoint: endpoint { - remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - }; - }; -}; - -&ipcc { - status = "okay"; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -<dc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; - status = "okay"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint@0 { - reg = <0>; - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&m4_rproc { - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, - <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; - interrupt-parent = <&exti>; - interrupts = <68 1>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sai2 { - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; - pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; - status = "okay"; - - sai2a: audio-controller@4400b004 { - #clock-cells = <0>; - dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - status = "okay"; - - sai2a_port: port { - sai2a_endpoint: endpoint { - remote-endpoint = <&cs42l51_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; - - sai2b: audio-controller@4400b024 { - dma-names = "rx"; - st,sync = <&sai2a 2>; - clocks = <&rcc SAI2_K>, <&sai2a>; - clock-names = "sai_ck", "MCLK"; - status = "okay"; - - sai2b_port: port { - sai2b_endpoint: endpoint { - remote-endpoint = <&cs42l51_rx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&vrefbuf { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - vdda-supply = <&vdd>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index d26adcbeba33..7985b80967ca 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -6,11 +6,24 @@ /dts-v1/; -#include "stm32mp157a-dk1.dts" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &dsi { diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index b8cc0fb0ec48..1fc43251d697 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -5,8 +5,10 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -89,6 +91,22 @@ }; }; +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc1_in6_pins_a>; + pinctrl-names = "default"; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "disabled"; + adc1: adc@0 { + st,adc-channels = <0 1 6>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-nsecs = <400>; + status = "okay"; + }; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; @@ -305,6 +323,22 @@ status = "okay"; }; +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + &timers6 { status = "okay"; /* spare dmas for other usage */ diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 3789312c8539..228e35e16884 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -283,6 +283,18 @@ }; }; +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_pins_a>; @@ -296,7 +308,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm2_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@1 { @@ -310,7 +323,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@7 { @@ -324,7 +338,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@11 { @@ -340,6 +355,7 @@ &usbotg_hs { dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi deleted file mode 100644 index 875adf5e1e30..000000000000 --- a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AA>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - }; - - gpioj: gpio@5000b000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - }; - - gpiok: gpio@5000c000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AA>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi deleted file mode 100644 index 961fa12a59c3..000000000000 --- a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AB>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi deleted file mode 100644 index 26600f188d25..000000000000 --- a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AC>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <12>; - gpio-ranges = <&pinctrl 0 128 12>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AC>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi deleted file mode 100644 index 910113f3e69a..000000000000 --- a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AD>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi new file mode 100644 index 000000000000..b06a55a2fa18 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xc.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/ { + soc { + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi new file mode 100644 index 000000000000..f6672e87aef3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -0,0 +1,625 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-DK"; + routing = + "Playback" , "MCLK", + "Capture" , "MCLK", + "MICL" , "Mic Bias"; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + #sound-dai-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; + }; + }; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + VL-supply = <&v3v3>; + VD-supply = <&v1v8_audio>; + VA-supply = <&v1v8_audio>; + VAHP-supply = <&v1v8_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + clocks = <&sai2a>; + clock-names = "MCLK"; + status = "okay"; + + cs42l51_port: port { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + cs42l51_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&cs42l51_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&cs42l51_rx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer@5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi new file mode 100644 index 000000000000..04f7a43ad66f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi new file mode 100644 index 000000000000..328dad140e9b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi new file mode 100644 index 000000000000..7eaa245f44db --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi new file mode 100644 index 000000000000..b63e207de216 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; |