diff options
| author | Stefan Eichenberger <stefan.eichenberger@toradex.com> | 2025-01-10 16:18:29 +0100 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2025-02-18 17:52:09 +0800 |
| commit | 83964a29379cb08929a39172780a4c2992bc7c93 (patch) | |
| tree | 1179ba3f58166c17961186d83cf8854349e0df61 | |
| parent | 38f59e0e8bd2b3e1319716e4aeaeb9a6223b006d (diff) | |
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
The current solution for powering off the Apalis iMX6 is not functioning
as intended. To resolve this, it is necessary to power off the
vgen2_reg, which will also set the POWER_ENABLE_MOCI signal to a low
state. This ensures the carrier board is properly informed to initiate
its power-off sequence.
The new solution uses the regulator-poweroff driver, which will power
off the regulator during a system shutdown.
Cc: <stable@vger.kernel.org>
Fixes: 4eb56e26f92e ("ARM: dts: imx6q-apalis: Command pmic to standby for poweroff")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index dffab5aa8b9c..88be29166c1a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -108,6 +108,11 @@ }; }; + poweroff { + compatible = "regulator-poweroff"; + cpu-supply = <&vgen2_reg>; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-always-on; @@ -236,10 +241,6 @@ status = "disabled"; }; -&clks { - fsl,pmic-stby-poweroff; -}; - /* Apalis SPI1 */ &ecspi1 { cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; @@ -527,7 +528,6 @@ pmic: pmic@8 { compatible = "fsl,pfuze100"; - fsl,pmic-stby-poweroff; reg = <0x08>; regulators { |