Merge tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "These are mostly assorted updates of thermal drivers used on ARM
  platforms:

   - Use dev_err_probe() helpers to simplify the init code in the Qoriq
     thermal driver (Frank Li)

   - Power down the Qoriq's TMU at suspend time (Alice Guo)

   - Add ipq5332, ipq5424 compatible to the QCom's tsens thermal driver
     and TSENS enable / calibration support for V2 (Praveenkumar I)

   - Add missing rk3328 mapping entry (Trevor Woerner)

   - Remove duplicate struct declaration from the thermal core header
     file (Xueqin Luo)

   - Disable the monitoring mode during suspend in the LVTS Mediatek
     driver to prevent temperature acquisition glitches (Nícolas F. R.
     A. Prado)

   - Disable Stage 3 thermal threshold in the LVTS Mediatek driver
     because it disables the suspend ability and does not have an
     interrupt handler (Nícolas F. R. A. Prado)

   - Fix low temperature offset interrupt in the LVTS Mediatek driver to
     prevent multiple interrupts from triggering when the system is at
     its normal functionning temperature (Nícolas F. R. A. Prado)

   - Enable interrupts in the LVTS Mediatek driver only on sensors that
     are in use (Nícolas F. R. A. Prado)

   - Add the BCM74110 compatible DT binding and the corresponding code
     to support a chip based on a different process node than previous
     chips (Florian Fainelli)

   - Correct indentation and style in DTS example (Krzysztof Kozlowski)

   - Unify hexadecimal annotatation in the rcar_gen3 driver (Niklas
     Söderlund)

   - Factor out the code logic to read fuses on Gen3 and Gen4 in the
     rcar_gen3 thermal driver (Niklas Söderlund)

   - Drop unused driver data from the QCom's spmi temperature alarm
     driver (Johan Hovold)"

* tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data
  thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4
  thermal: rcar_gen3: Use lowercase hex constants
  dt-bindings: thermal: Correct indentation and style in DTS example
  thermal/drivers/brcmstb_thermal: Add support for BCM74110
  dt-bindings: thermal: Update for BCM74110
  thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors
  thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
  thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
  thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
  thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
  thermal: core: Remove duplicate struct declaration
  thermal/drivers/rockchip: Add missing rk3328 mapping entry
  thermal/drivers/tsens: Add TSENS enable and calibration support for V2
  dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
  thermal/drivers/qoriq: Power down TMU on system suspend
  thermal/drivers/qoriq: Use dev_err_probe() simplify the code

0 files changed, 0 insertions, 0 deletions