diff options
| -rw-r--r-- | arch/arm/boot/dts/microchip/sama7d65.dtsi | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index cd17b838e179..3949b02efbd3 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -217,6 +217,199 @@ clock-names = "pclk", "gclk"; }; + flx0: flexcom@e1820000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1820000 0x200>; + ranges = <0x0 0xe1820000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart0: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, + <&dma1 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>, + <&dma0 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + flx1: flexcom@e1824000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1824000 0x200>; + ranges = <0x0 0xe1824000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + spi1: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx2: flexcom@e1828000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1828000 0x200>; + ranges = <0x0 0xe1828000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart2: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, + <&dma1 AT91_XDMAC_DT_PERID(9)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + }; + + flx3: flexcom@e182c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe182c000 0x200>; + ranges = <0x0 0xe182c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c3: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + #address-cells = <1>; + #size-cells = <1>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(11)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + }; + + flx4: flexcom@e2018000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2018000 0x200>; + ranges = <0x0 0xe2018000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart4: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, + <&dma1 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>, + <&dma0 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx5: flexcom@e201c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe201c000 0x200>; + ranges = <0x0 0xe201c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c5: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, + <&dma0 AT91_XDMAC_DT_PERID(15)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + flx6: flexcom@e2020000 { compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; reg = <0xe2020000 0x200>; @@ -238,6 +431,80 @@ }; }; + flx7: flexcom@e2024000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2024000 0x200>; + ranges = <0x0 0xe2024000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart7: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, + <&dma1 AT91_XDMAC_DT_PERID(19)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + }; + + flx8: flexcom@e281c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe281c000 0x200>; + ranges = <0x0 0xe281c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c8: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx9: flexcom@e2820000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2820000 0x200>; + ranges = <0x0 0xe281c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c9: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + flx10: flexcom@e2824000 { compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; reg = <0xe2824000 0x200>; |