1 files changed, 0 insertions, 35 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
deleted file mode 100644
index 909c9935360d..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-STMicroelectronics STi SATA controller
-
-This binding describes a SATA device.
-
-Required properties:
- - compatible	   : Must be "st,ahci"
- - reg		   : Physical base addresses and length of register sets
- - interrupts	   : Interrupt associated with the SATA device
- - interrupt-names :   Associated name must be; "hostc"
- - clocks	   : The phandle for the clock
- - clock-names	   :   Associated name must be; "ahci_clk"
- - phys		   : The phandle for the PHY port
- - phy-names	   :   Associated name must be; "ahci_phy"
-
-Optional properties:
- - resets	   : The power-down, soft-reset and power-reset lines of SATA IP
- - reset-names	   :   Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst"
-
-Example:
-
-	/* Example for stih407 family silicon */
-	sata0: sata@9b20000 {
-		compatible	= "st,ahci";
-		reg		= <0x9b20000 0x1000>;
-		interrupts	= <GIC_SPI 159 IRQ_TYPE_NONE>;
-		interrupt-names	= "hostc";
-		phys		= <&phy_port0 PHY_TYPE_SATA>;
-		phy-names	= "ahci_phy";
-		resets		= <&powerdown STIH407_SATA0_POWERDOWN>,
-				  <&softreset STIH407_SATA0_SOFTRESET>,
-				  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
-		reset-names	= "pwr-dwn", "sw-rst", "pwr-rst";
-		clocks		= <&clk_s_c0_flexgen CLK_ICN_REG>;
-		clock-names	= "ahci_clk";
-	};