diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/dac')
7 files changed, 133 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml new file mode 100644 index 000000000000..a355d52a9d64 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad3530r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD3530R and Similar DACs + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are low-power, + 16-bit, buffered voltage output digital-to-analog converters (DACs) with + software-programmable gain controls, providing full-scale output spans of 2.5V + or 5V for reference voltages of 2.5V. These devices operate from a single 2.7V + to 5.5V supply and are guaranteed monotonic by design. The "R" variants + include a 2.5V, 5ppm/°C internal reference, which is disabled by default. + Datasheet can be found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3530_ad530r.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3531-ad3531r.pdf + +properties: + compatible: + enum: + - adi,ad3530 + - adi,ad3530r + - adi,ad3531 + - adi,ad3531r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vdd-supply: + description: Power Supply Input. + + iovdd-supply: + description: Digital Power Supply Input. + + io-channels: + description: + ADC channel used to monitor internal die temperature, output voltages, and + current of a selected channel via the MUXOUT pin. + maxItems: 1 + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active low signal that is falling edge sensitive. When it is deasserted, + the digital core initialization is performed and all DAC registers except + the Interface Configuration A register are reset to their default values. + maxItems: 1 + + ldac-gpios: + description: + LDAC pin to be used as a hardware trigger to update the DAC channels. If + not present, the DAC channels are updated by Software LDAC. + maxItems: 1 + + adi,range-double: + description: + Configure the output range for all channels. If the property is present, + the output will range from 0V to 2Vref. If the property is not present, + the output will range from 0V to Vref. + type: boolean + +required: + - compatible + - reg + - vdd-supply + - iovdd-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ad3530r"; + reg = <0>; + spi-max-frequency = <1000000>; + + vdd-supply = <&vdd>; + iovdd-supply = <&iovdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 2d2561a52683..547044b8e246 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -217,7 +217,7 @@ required: - reg - spi-max-frequency -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml index 5ee80bf6aa11..f994c1ef6d41 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml @@ -27,6 +27,8 @@ properties: vdrive-supply: true + vrefin-supply: true + reset-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml index 33490853497b..1aece3392b77 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml @@ -144,7 +144,7 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml index c8c434c10643..3c8e5781e42c 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml @@ -124,7 +124,7 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml index 0dc577c33918..26011b5639d8 100644 --- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml @@ -64,7 +64,7 @@ required: - reg - vdd-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml index 941a49c93943..c00fa50e42e8 100644 --- a/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml +++ b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml @@ -5,19 +5,26 @@ $id: http://devicetree.org/schemas/iio/dac/rohm,bd79703.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD79703 DAC device driver +title: ROHM BD79700, BD79701, BD79702 and BD79703 DACs maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - The ROHM BD79703 is a 6 channel, 8-bit DAC. - Datasheet can be found here: + The ROHM BD7970[0,1,2,3] are 8-bit DACs. The BD79700 has 2 channels, + BD79701 3 channels, BD79702 4 channels and BD79703 has 6 channels. + Datasheets for BD79702 and BD79703 can be found from https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79702fv-lb_bd79703fv-lb-e.pdf + and for the BD79700 and the BD79701 from + https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79700fvm-lb_bd79701fvm-lb-e.pdf properties: compatible: - const: rohm,bd79703 + enum: + - rohm,bd79700 + - rohm,bd79701 + - rohm,bd79702 + - rohm,bd79703 reg: maxItems: 1 @@ -27,23 +34,35 @@ properties: vfs-supply: description: - The regulator to use as a full scale voltage. The voltage should be between 2.7V .. VCC + The regulator to use as a full scale voltage. The voltage should be + between 2.7V .. VCC. Not present on BD79700 and BD79701. vcc-supply: description: - The regulator supplying the operating voltage. Should be between 2.7V ... 5.5V + The regulator supplying the operating voltage. Should be between + 2.7V ... 5.5V. Is used also as a Vfs on BD79700 and BD79701. required: - compatible - reg - spi-max-frequency - - vfs-supply - vcc-supply +if: + properties: + compatible: + contains: + enum: + - rohm,bd79702 + - rohm,bd79703 +then: + required: + - vfs-supply + allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | |