30 files changed, 548 insertions, 70 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ad5820.txt b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
deleted file mode 100644
index 5764cbedf9b7..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ad5820.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Analog Devices AD5820 autofocus coil
-
-Required Properties:
-
-  - compatible: Must contain one of:
-		- "adi,ad5820"
-		- "adi,ad5821"
-		- "adi,ad5823"
-
-  - reg: I2C slave address
-
-  - VANA-supply: supply of voltage for VANA pin
-
-Optional properties:
-
-   - enable-gpios : GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is
-active low, a high level on the pin enables the device.
-
-Example:
-
-       ad5820: coil@c {
-               compatible = "adi,ad5820";
-               reg = <0x0c>;
-
-               VANA-supply = <&vaux4>;
-               enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
-       };
-
diff --git a/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml b/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml
new file mode 100644
index 000000000000..0c8f24f692ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adi,ad5820.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5820 autofocus coil
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  The AD5820 is a current sink driver designed for precise control of
+  voice coil motors (VCMs) in camera autofocus systems.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5820
+      - adi,ad5821
+      - adi,ad5823
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is active low,
+      a high level on the pin enables the device.
+
+  VANA-supply:
+    description: supply of voltage for VANA pin
+
+required:
+  - compatible
+  - reg
+  - VANA-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        coil@c {
+            compatible = "adi,ad5820";
+            reg = <0x0c>;
+
+            enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+            VANA-supply = <&vaux4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adi,adp1653.txt
index 4cce0de40ee9..4cce0de40ee9 100644
--- a/Documentation/devicetree/bindings/media/i2c/adp1653.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adp1653.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
index 9ee1483775f6..dee8ce7cb7ba 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/adv7180.yaml#
+$id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices ADV7180 analog video decoder family
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7343.txt b/Documentation/devicetree/bindings/media/i2c/adi,adv7343.txt
index 5653bc2428b8..5653bc2428b8 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7343.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7343.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
index d6353081402b..254987350321 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml#
+$id: http://devicetree.org/schemas/media/i2c/adi,adv748x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices ADV748X video decoder with HDMI receiver
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
index 7589d377c686..6c403003cdda 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
+$id: http://devicetree.org/schemas/media/i2c/adi,adv7604.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v032.txt
index 100f0ae43269..100f0ae43269 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v032.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/max2175.txt b/Documentation/devicetree/bindings/media/i2c/maxim,max2175.txt
index 02b4e9cd7b1b..02b4e9cd7b1b 100644
--- a/Documentation/devicetree/bindings/media/i2c/max2175.txt
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max2175.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/micron,mt9m111.txt
index d0bed6fa901a..d0bed6fa901a 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
+++ b/Documentation/devicetree/bindings/media/i2c/micron,mt9m111.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tda1997x.txt b/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt
index e76167999d76..e76167999d76 100644
--- a/Documentation/devicetree/bindings/media/i2c/tda1997x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m001.txt
index c920552b03ef..c920552b03ef 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m001.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml
new file mode 100644
index 000000000000..03d476bcf805
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2025 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov02e10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV02E10 CMOS Sensor
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  The Omnivision OV02E10 and OV02C10 sensors are 2 megapixel, CMOS image sensors which support:
+  - Automatic black level calibration (ABLC)
+  - Programmable controls for frame rate, mirror and flip, binning, cropping
+    and windowing
+  - OVO2C10
+    - 10 bit RAW Bayer 1920x1080 60 fps 2-lane @ 800 Mbps/lane
+    - 10 bit RAW Bayer 1920x1080 60 fps 1-lane @ 1500 Mbps/lane
+    - 10 bit RAW Bayer 1280x720 60 fps cropped 1-lane @ 960 Mbps/lane
+    - 10 bit RGB/BW 640x480 60 fps bin2 or skip2 1-lane @ 800 Mbps/lane
+    - 10 bit RGB/BW 480x270 60 fps bin4 or skip4 1-lane @ 800 Mbps/lane
+  - OV02E10
+    - 10 bit RAW Bayer 1920x1088 60 fps 2-lane @ 720 Mbps/lane
+    - 10 bit RAW Bayer 1280x1080 60 fps 2-lane @ 720 Mbps/lane
+    - 10 bit Quad Bayer 960x540 60 fps 2-lane 360 Mbps/lane
+    - 8 bit Quad Bayer 480x270 1/3/5/10 fps sub2 288 Mbps/lane
+    - 8 bit Quad Bayer 232x132 1/3/5/10 fps sub4 144 Mbps/lane
+  - Dynamic defect pixel cancellation
+  - Standard SCCB command interface
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov02c10
+      - ovti,ov02e10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+          link-frequencies: true
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+          - remote-endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov02e10: camera@10 {
+            compatible = "ovti,ov02e10";
+            reg = <0x10>;
+
+            reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov02e10_clk>;
+
+            assigned-clocks = <&ov02e10_clk>;
+            assigned-clock-parents = <&ov02e10_clk_parent>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov02e10_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+
+        ov02c10: camera@36 {
+            compatible = "ovti,ov02c10";
+            reg = <0x36>;
+
+            reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov02c10_clk>;
+
+            assigned-clocks = <&ov02c10_clk>;
+            assigned-clock-parents = <&ov02c10_clk_parent>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov02c10_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov2640.txt
index 989ce6cb6ac3..989ce6cb6ac3 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2640.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
index 92989a619f29..92989a619f29 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov2659.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov7670.txt
index 2c972a56f3cb..2c972a56f3cb 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov7670.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7670.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov7740.txt
index af781c3a5f0e..af781c3a5f0e 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov7740.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7740.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov9650.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov9650.txt
index 506dfc52872a..506dfc52872a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov9650.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9650.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
index 07d088cf66e0..38c3759bcd9f 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
+$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
@@ -16,6 +16,9 @@ description: |-
   Image data is sent through MIPI CSI-2, which is configured as either 2 or
   4 data lanes.
 
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     const: sony,imx219
@@ -79,7 +82,7 @@ required:
   - VDDL-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
index fa69bd21c8da..990acf89af8f 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -136,7 +136,7 @@ examples:
             port {
                 imx290_ep: endpoint {
                     data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <445500000>;
+                    link-frequencies = /bits/ 64 <222750000 148500000>;
                     remote-endpoint = <&csiphy0_ep>;
                 };
             };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
index 34962c5c7006..7c11e871dca6 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sony IMX415 CMOS Image Sensor
 
 maintainers:
-  - Michael Riesch <michael.riesch@wolfvision.net>
+  - Michael Riesch <michael.riesch@collabora.com>
 
 description: |-
   The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
new file mode 100644
index 000000000000..3c071e6fbea6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2025 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,vd55g1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD55G1 Global Shutter Image Sensor
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+ The STMicroelectronics VD55G1 is a global shutter image sensor with an active
+ array size of 804H x 704V. It is programmable through I2C interface. The I2C
+ address is fixed to 0x10.
+
+ Image data is sent through MIPI CSI-2, which is configured as only 1 data
+ lane. The sensor provides 4 GPIOS that can be used for external LED signal
+ (synchronized with sensor integration periods).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: st,vd55g1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcore-supply:
+    description: Digital core power supply (1.15V)
+
+  vddio-supply:
+    description: Digital IO power supply (1.8V)
+
+  vana-supply:
+    description: Analog power supply (2.8V)
+
+  reset-gpios:
+    description: Sensor reset active low GPIO (XSHUTDOWN)
+    maxItems: 1
+
+  st,leds:
+    description:
+      List sensor's GPIOs used to control strobe light sources during exposure
+      time. The numbers identify the sensor pin on which the illumination
+      system is connected. GPIOs are active-high.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+          link-frequencies:
+            maxItems: 1
+            items:
+              minimum: 125000000
+              maximum: 600000000
+
+          lane-polarities:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcore-supply
+  - vddio-supply
+  - vana-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@10 {
+            compatible = "st,vd55g1";
+            reg = <0x10>;
+
+            clocks = <&camera_clk_12M>;
+
+            vcore-supply = <&camera_vcore_v1v15>;
+            vddio-supply = <&camera_vddio_v1v8>;
+            vana-supply = <&camera_vana_v2v8>;
+
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            st,leds = <2>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                endpoint {
+                    data-lanes = <1>;
+                    link-frequencies = /bits/ 64 <600000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
new file mode 100644
index 000000000000..c6673b8539db
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,vd56g3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD56G3 Global Shutter Image Sensor
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  The STMicroelectronics VD56G3 is a 1.5 M pixel global shutter image sensor
+  with an active array size of 1124 x 1364 (portrait orientation). It is
+  programmable through I2C, the address is fixed to 0x10. The sensor output is
+  available via CSI-2, which is configured as either 1 or 2 data lanes. The
+  sensor provides 8 GPIOS that can be used for external LED signal
+  (synchronized with sensor integration periods)
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,vd56g3
+      - st,vd66gy
+    description:
+      Two variants are availables; VD56G3 is a monochrome sensor while VD66GY
+      is a colour variant.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcore-supply:
+    description: Digital core power supply (1.15V)
+
+  vddio-supply:
+    description: Digital IO power supply (1.8V)
+
+  vana-supply:
+    description: Analog power supply (2.8V)
+
+  reset-gpios:
+    description: Sensor reset active low GPIO (XSHUTDOWN)
+    maxItems: 1
+
+  st,leds:
+    description:
+      List sensor's GPIOs used to control strobe light sources during exposure
+      time. The numbers identify the sensor pin on which the illumination system
+      is connected. GPIOs are active-high.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 7
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          link-frequencies:
+            maxItems: 1
+            items:
+              enum: [402000000, 750000000]
+
+          lane-polarities:
+            minItems: 1
+            maxItems: 3
+            description: Any lane can be inverted or not.
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcore-supply
+  - vddio-supply
+  - vana-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@10 {
+            compatible = "st,vd56g3";
+            reg = <0x10>;
+
+            clocks = <&camera_clk_12M>;
+
+            vcore-supply = <&camera_vcore_v1v15>;
+            vddio-supply = <&camera_vddio_v1v8>;
+            vana-supply = <&camera_vana_v2v8>;
+
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            st,leds = <6>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <402000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
index 2030366994d1..2e129bf573b7 100644
--- a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
@@ -38,6 +38,13 @@ properties:
   '#clock-cells':
     const: 0
 
+  reg:
+    maxItems: 1
+    description:
+      The strap I2C address of the serializer. Can be used by the deserializer
+      to communicate over back-channel when the forward-channel is not yet
+      active.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -81,51 +88,57 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    serializer {
-      compatible = "ti,ds90ub953-q1";
+    link {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      serializer@18 {
+        compatible = "ti,ds90ub953-q1";
+        reg = <0x18>;
 
-      gpio-controller;
-      #gpio-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
 
-      #clock-cells = <0>;
+        #clock-cells = <0>;
 
-      ports {
-        #address-cells = <1>;
-        #size-cells = <0>;
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
 
-        port@0 {
-          reg = <0>;
-          ub953_in: endpoint {
-            clock-lanes = <0>;
-            data-lanes = <1 2 3 4>;
-            remote-endpoint = <&sensor_out>;
+          port@0 {
+            reg = <0>;
+            ub953_in: endpoint {
+              clock-lanes = <0>;
+              data-lanes = <1 2 3 4>;
+              remote-endpoint = <&sensor_out>;
+            };
           };
-        };
 
-        port@1 {
-          reg = <1>;
-          endpoint {
-            remote-endpoint = <&deser_fpd_in>;
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&deser_fpd_in>;
+            };
           };
         };
-      };
 
-      i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
 
-        sensor@1a {
-          compatible = "sony,imx274";
-          reg = <0x1a>;
+          sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
 
-          reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
 
-          clocks = <&serializer>;
-          clock-names = "inck";
+            clocks = <&serializer>;
+            clock-names = "inck";
 
-          port {
-            sensor_out: endpoint {
-              remote-endpoint = <&ub953_in>;
+            port {
+              sensor_out: endpoint {
+                remote-endpoint = <&ub953_in>;
+              };
             };
           };
         };
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
index 0b71e6f911a8..4dcbd2b039a5 100644
--- a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
@@ -68,6 +68,12 @@ properties:
             description: The link number
             maxItems: 1
 
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
           i2c-alias:
             $ref: /schemas/types.yaml#/definitions/uint32
             description:
@@ -107,7 +113,8 @@ properties:
             maximum: 14
             description: Manual EQ level
 
-          serializer:
+        patternProperties:
+          '^serializer(@[0-9a-f]+)*$':
             type: object
             description: FPD-Link Serializer node
 
@@ -115,7 +122,6 @@ properties:
           - reg
           - i2c-alias
           - ti,rx-mode
-          - serializer
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -309,13 +315,17 @@ examples:
           /* Link 0 has DS90UB953 serializer and IMX274 sensor */
 
           link@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
             reg = <0>;
             i2c-alias = <0x44>;
 
             ti,rx-mode = <3>;
 
-            serializer1: serializer {
+            serializer1: serializer@30 {
               compatible = "ti,ds90ub953-q1";
+              reg = <0x30>;
 
               gpio-controller;
               #gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ths8200.txt b/Documentation/devicetree/bindings/media/i2c/ti,ths8200.txt
index 285f6ae7dfa9..285f6ae7dfa9 100644
--- a/Documentation/devicetree/bindings/media/i2c/ths8200.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ths8200.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/ti,tvp514x.txt
index 46752cc71f2e..46752cc71f2e 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp514x.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt
index 94b908ace53c..94b908ace53c 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/ti,tvp7002.txt
index 5f28b5d9abcc..5f28b5d9abcc 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp7002.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
index 59102edcf01e..59102edcf01e 100644
--- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt