Age | Commit message (Collapse) | Author |
|
The Elan eKTH8D18 touchscreen controller is an I2C HID device with a
longer boot-up time. Power sequence timing wise it is compatible with
the eKTH6A12NAY, with a power-on delay of at least 5ms, 20ms
out-of-reset for I2C ack response, and 150ms out-of-reset for I2C HID
enumeration, both shorter than what the eKTH6A12NAY requires.
Enumeration and subsequent operation follows the I2C HID standard.
Add a compatible string for it with the ekth6a12nay one as a fallback.
No enum was used as it is rare to actually add new entries. These
chips are commonly completely backward compatible, and unless the
power sequencing delays change, there is no real effort being made to
keep track of new parts, which come out constantly.
Also drop the constraints on the I2C address since it's not really
part of the binding.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-2-wenst@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with mainline to bring in xpad controller changes.
|
|
Convert the Dialog Semiconductor DA7280 Low Power High-Definition
Haptic Driver bindings to dt-schema.
Due to the implementation and usage in DT the array must be
an uint32 array.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-misc-da7280-convert-v4-1-2972c4e81cb5@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In Xiaomi Poco F1 (qcom/sdm845-xiaomi-beryllium-ebbg.dts), the FocalTech
FT8719 touchscreen is integrally connected to the display panel
(EBBG FT8719) and thus should be power sequenced together with display
panel using the panel property. Since the edt-ft5x06 touchscreen binding
uses almost all the properties present in touchscreen.yaml, let's remove
additionalProperties: false and use unevaluatedProperties to include all
the properties, including the needed panel property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-1-bfb53da52945@joelselvaraj.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Update Mattijs Korpershoek's email address to @kernel.org.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250428-keypad-email-v1-1-dde6ac76725b@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Prepare input updates for 6.15 merge window.
|
|
Document the Goodix GT9897 which is a Berlin-A series touchscreen
controller IC by Goodix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-2-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver recognizes standard "wakeup-source" property and there are
DTS files using it. Add the property to the binding.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502280105.REZ29MVg-lkp@intel.com/
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/Z8EMI9ALqYY72VBV@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The property is implemented in the driver but not described in dt-bindings.
Add missing property 'gpio-activelow' to DT schema.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-3-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with the mainline.
|
|
Matrix keypads with high capacity need a longer settle time after
enabling all columns. Add an optional property to specify the settle
time.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-6-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the gpio-matrix-keypad bindings from text to DT schema.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-4-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250107125844.226466-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
IST3038H is a touchscreen IC which seems mostly compatible with IST3038C
except that it reports a different chip ID value.
Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-4-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add bindings for touchscreen controllers attached using the Z2 protocol.
Those are present in most Apple devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-z2-v6-1-c2115d6e5a8f@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
|
|
Add compatibles for SoCs using this device (mt8183, mt8365, mt8516).
Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241225192631.25017-2-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add compatible strings for the MT6328 PMIC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018081050.23592-3-y.oudjana@protonmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- improvement in the way hid-bpf coexists with specific drivers (others
than hid-generic) that are already bound to devices (Benjamin
Tissoires)
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He
Lugang)
- assorted cleanups and small code fixes to HID core (Dmitry Torokhov,
Yan Zhen, Nathan Chancellor, Andy Shevchenko)
- support for Corsair Void headset family (Stuart Hayhurst)
- Support for Goodix GT7986U SPI (Charles Wang)
- initial vendor-specific driver for Kysona, currently adding support
for Kysona M600 (Lode Willems)
- other assorted code cleanups and small bugfixes all over the place
* tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits)
HID: multitouch: make mt_set_mode() less cryptic
HID: hid-goodix-spi: Add OF supports
dt-bindings: input: Goodix GT7986U SPI HID Touchscreen
HID: hyperv: streamline driver probe to avoid devres issues
HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support
HID: rmi: Add select RMI4_F3A in Kconfig
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
HID: steelseries: Add capacity_level mapping
HID: steelseries: Fix battery requests stopping after some time
HID: hid-goodix: Fix HID get/set feature operation overwritten problem
HID: hid-goodix: Return 0 when receiving an empty HID feature package
HID: bpf: drop use of Logical|Physical|UsageRange
HID: bpf: Fix Rapoo M50 Plus Silent side buttons
HID: bpf: Fix NKRO on Mistel MD770
HID: replace BUG_ON() with WARN_ON()
HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set
HID: Kysona: add basic online status
HID: Kysona: check battery status every 5s using a workqueue
HID: Kysona: Add basic battery reporting for Kysona M600
HID: Add IDs for Kysona
...
|
|
The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.
NOTE: these bindings are distinct from the bindings used with the
GT7986U when the chip is running I2C firmware. For some background,
see discussion on the mailing lists in the thread:
https://lore.kernel.org/r/20241018020815.3098263-2-charles.goodix@gmail.com
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The user and driver both indicate this property is a boolean, not int32.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20241101211304.20886-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert device tree binding doc zii,rave-sp-pwrbutton.txt to yaml format.
Additional changes:
- add ref to input.yaml.
- remove mfd node in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-zii_yaml-v2-1-0ab730607422@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add a compatible for the keys found on the MT6359 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241008074137.20269-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the mfd: mediatek: mt6397 binding to DT schema format.
MT6323, MT6358, and MT6397 are PMIC devices with multiple function
subdevices. They share a common PMIC design but have variations in
subdevice combinations.
Key updates in this conversion:
1. RTC:
- Convert rtc-mt6397.txt and merge into parent MT6397 PMIC DT schema.
2. Regulators:
- Align to generic name "regulators".
- Update references from .txt to .yaml for mt6323, mt6358, and mt6397
regulators.
- Simplify regulator name labels in device tree examples.
3. Audio Codec:
- Simplify Audio Codec part with updating compatible items.
- Align to generic name "audio-codec" for codec and sound subdevices.
4. Clocks:
- Align to generic name "clocks" for clockbuffer subdevices.
5. LEDs:
- Convert leds-mt6323.txt and merge into parent MT6397 PMIC DT schema.
- Update LED binding.
6. Keys:
- Add detailed descriptions for power and home keys.
- Add compatible: mediatek,mt6358-keys.
7. Power Controller:
- Convert mt6323-poweroff.txt and merge into parent MT6397 PMIC DT
schema.
- Add #power-domain-cells property to fix dt-binding check error.
- Clarify "BBPU" as "Baseband power up".
8. Pinctrl:
- Align to generic name "pinctrl" instead of "pin-controller".
9. Compatible:
- Drop "mediatek,mt6357" since there is a separated DT Schema
for PMIC MT6357.
10. Examples:
- MT6323: Retain complete examples for this PMIC.
- MT6358 and MT6397: simplify settings in regulators.
- Preserve "audio-codec", "clocks", "pinctrl", "rtc", and "keys"
sections as they contain typical settings for different PMICs.
Additional updates:
- MAINTAINERS: Add co-maintainers and reference to
mfd/mediatek,mt6397.yaml for LED and power-controller drivers.
- input/mediatek,pmic-keys.yaml: Update reference to
mfd/mediatek,mt6397.yaml.
Signed-off-by: Sen Chu <sen.chu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241001104145.24054-3-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document the Novatek NVT touchscreen controller present in devices like
qcom/sdm845-xiaomi-beryllium-tianma.dts. Also, include the devictree
binding file in the MAINTAINERS file.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-2-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
"A revert of Device Tree binding for Goodix SPI HID driver (while
keeping ACPI still available), as it conflicted with already existing
binding and the original submitter didn't respond in time with a fix.
We will be looking into ways how to reintroduce it properly (we have
to agree on a way how to handle cases where vendor uses the very same
product ID for I2C and SPI parts, leading to this kind conflict). But
before that is settled, let's revert the to unbreak everybody else
(Krzysztof Kozlowski)"
* tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
dt-bindings: input: Revert "dt-bindings: input: Goodix SPI HID Touchscreen"
HID: hid-goodix: drop unsupported and undocumented DT part
|
|
This reverts commit 9184b17fbc23 ("dt-bindings: input: Goodix SPI HID
Touchscreen") because it duplicates existing binding leadings to errors:
goodix,gt7986u.example.dtb:
touchscreen@0: compatible: 'oneOf' conditional failed, one must be fixed:
['goodix,gt7986u'] is too short
'goodix,gt7375p' was expected
This was reported on mailing list on 6th of September, but no reaction
happened from contributor or maintainer to fix it.
Therefore let's drop binding which breaks and duplicates existing one.
Fixes: 9184b17fbc23 ("dt-bindings: input: Goodix SPI HID Touchscreen")
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+QfTtRj_JCqXzktQ49H8VUnztVuaBjvvkg3fwEHniUHw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- New HID over SPI driver for Goodix devices that don't follow
Microsoft's HID-over-SPI specification, so a separate driver is
needed. Currently supported device is GT7986U touchscreen (Charles
Wang)
- support for new hardware features in Wacom driver (high-res wheel
scrolling, touchstrings with relative motions, support for two
touchrings) (Jason Gerecke)
- support for customized vendor firmware loading in intel-ish driver
(Zhang Lixu)
- fix for theoretical race condition in i2c-hid (Dmitry Torokhov)
- support for HIDIOCREVOKE -- evdev's EVIOCREVOKE equivalent in hidraw
(Peter Hutterer)
- initial hidraw selftest implementation (Benjamin Tissoires)
- constification of device-specific report descriptors (Thomas
Weißschuh)
- other small assorted fixes and device ID / quirk additions
* tag 'hid-for-linus-2024091602' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
hid: cp2112: Use irq_get_trigger_type() helper
HID: i2c-hid: ensure various commands do not interfere with each other
HID: multitouch: Add support for Thinkpad X12 Gen 2 Kbd Portfolio
HID: wacom: Do not warn about dropped packets for first packet
HID: wacom: Support sequence numbers smaller than 16-bit
HID: lg: constify fixed up report descriptor
HID: uclogic: constify fixed up report descriptor
HID: waltop: constify fixed up report descriptor
HID: sony: constify fixed up report descriptor
HID: pxrc: constify fixed up report descriptor
HID: steelseries: constify fixed up report descriptor
HID: viewsonic: constify fixed up report descriptor
HID: vrc2: constify fixed up report descriptor
HID: xiaomi: constify fixed up report descriptor
HID: maltron: constify fixed up report descriptor
HID: keytouch: constify fixed up report descriptor
HID: holtek-kbd: constify fixed up report descriptor
HID: dr: constify fixed up report descriptor
HID: bigbenff: constify fixed up report descriptor
HID: picoLCD: Use backlight power constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
- Add support for one new Elan device (ekth6a12nay) (Zhaoxiong Lv)
|
|
Add YAML bindings for ep93xx SoC keypad.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240811214656.3773098-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Bring in changes removing support for platform data from matrix-keypad
driver.
|
|
The PM6150 vibrator module is compatible with the PMI632 vibrator
module, document the PM6150 vibrator compatible as fallback for the
PMI632 vibrator.
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240606181027.98537-2-adrian@travitia.xyz
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The Elan ekth6a12nay touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Node names should be generic.
Improve the binding example by using 'touchscreen' as the node name.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240830194331.3774408-1-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Adding software support for enabling the pure gpio capability of the
device - which allows all I/O to be used as GPIO. Previously, I/O
configuration was limited by software to partial GPIO support only.
When working in a pure gpio mode, the device does not require the
certain properties and hence, the following are now made optional:
- interrupts
- keypad,num-rows
- keypad,num-columns
- linux,keymap
However, note that the above are required to be specified when
configuring the device as a keypad, for which dependencies have been added
such that specifying either one requires the remaining as well.
Also, note that interrupts are made optional, but required when the device
has either been configured in keypad mode or as an interrupt controller.
This has been done since they may not necessarily be used when leveraging
the device purely for GPIO.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Link: https://lore.kernel.org/r/20240826-adp5588_gpio_support-v11-3-3e5ac2bd31b7@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert binding doc ads7846.txt to yaml format.
Additional change:
- add ref to touchscreen.yaml and spi-peripheral-props.yaml.
- use common node name touchscreen.
- sort ti properties alphabetically.
- sort common properties alphabetically.
- sort compatible string alphabetically.
- remove vcc-supply from required list.
- deprecated ti,x-min, ti,y-min
Fix below warning: arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dtb: touchscreen@0:
ti,x-min: b'\x00}' is not of type 'object', 'array', 'boolean', 'null'
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240826162302.960732-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
|
|
The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Convert binding doc colibri-vf50-ts.txt to yaml.
Additional change:
- add ref touchscreen.yaml.
- remove standard pinctrl properties.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /touchscreen:
failed to match any schema with compatible: ['toradex,vf50-touchscreen']
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240819142434.311760-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert binding doc ad7879.txt to yaml format.
Additional change:
- Add ref to /schemas/spi/spi-peripheral-props.yaml
- Add #gpio-cell
- Remove spi-cpol and spi-cpha in example, the place hold 'spi' can't
correct detect spi-controler.yaml. So these two properties can't
be recongnized.
Fix warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dtb:
/bus@5a000000/i2c@5a800000/touchscreen@2c: failed to match any schema with compatible: ['adi,ad7879-1']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240810143840.3615450-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Document FocalTech FT8201 support by adding the compatible.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240804031310.331871-2-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard" and
"__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors from
the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
* tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
Input: yealink - simplify locking in sysfs attribute handling
Input: yealink - use driver core to instantiate device attributes
Input: ati-remote2 - use driver core to instantiate device attributes
Input: omap-keypad - use driver core to instantiate device attributes
Input: atmel_mxt_ts - use driver core to instantiate device attributes
Input: exc3000 - add EXC81W32 support
dt-bindings: input: touchscreen: exc3000: add EXC81W32
Input: twl4030-pwrbutton - fix kernel-doc warning
Input: himax_hx83112b - add support for HX83100A
Input: himax_hx83112b - add himax_chip struct for multi-chip support
Input: himax_hx83112b - implement MCU register reading
Input: himax_hx83112b - use more descriptive register defines
dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A
Input: do not check number of events in input_pass_values()
Input: preallocate memory to hold event values
Input: rearrange input_alloc_device() to prepare for preallocating of vals
Input: simplify event handling logic
Input: make events() method return number of events processed
Input: make sure input handlers define only one processing method
Input: evdev - remove ->event() method
...
|
|
In some configurations the touch controller can support the touch-keys.
Document the linux,keycodes property that enables those keys and
specifies the keycodes that should be used to report the key events.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240717-zinitix-tkey-v5-1-52ea4cd4bd50@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|