| Age | Commit message (Collapse) | Author |
|---|
|
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to describe various node usage during
boot phases with DT. Add bootph-all for all nodes that are used in the
bootloader on Renesas R-Car Gen2 SoCs.
All SoC require CPG clock and its input clock, RST Reset, PFC pin
control and PRR ID register access during all stages of the boot
process, those are marked using bootph-all property, and so is the SoC
bus node which contains these IP.
Each board console UART is also marked as bootph-all to make it
available in all stages of the boot process.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250209180616.160253-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Use the more concise interrupts-extended property to fully describe the
interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/a8610814e31d0562732672f11d2be1404322121a.1728045620.git.geert+renesas@glider.be
|
|
Use the more concise interrupts-extended property to fully describe the
interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/934b9b9992dacd72dbad0f5433728aac292a3cfc.1728045620.git.geert+renesas@glider.be
|
|
Use the more concise interrupts-extended property to fully describe the
interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/850317c7818b100f9afe026e80b6d685affe81a0.1728045620.git.geert+renesas@glider.be
|
|
Use the more concise interrupts-extended property to fully describe the
interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/623645456e7636f43150a70f8603114b26304818.1728045620.git.geert+renesas@glider.be
|
|
Commit 2071d0968e564b4b ("Documentation: gpio: guidelines for bindings")
deprecated the "gpio" suffix for GPIO consumers in favor of the "gpios"
suffix. Hence replace the "renesas,enable-gpio" property by
"renesas,enable-gpios" in HS-USB device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/c88724ce1e0d755302659cd790c0869ff579684e.1727853953.git.geert+renesas@glider.be
|
|
make dtbs_check W=2:
arch/arm/boot/dts/renesas/r8a7790-lager.dts:444.11-458.5: Warning (interrupt_provider): /i2c-mux4/pmic@58: Missing '#interrupt-cells' in interrupt provider
...
Fix this by adding the missing #interrupt-cells properties.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/a351e503ea97fb1af68395843f513925ff1bdf26.1707922460.git.geert+renesas@glider.be
|
|
make dtbs_check:
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'avdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'dvdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'pvdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'dvdd-3v-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'bgvdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
...
Fix this by adding the missing power supply properties, and by adding
fixed regulators where needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6c49fd83d327a68040f052bd9fd96fe25b0fc301.1698068647.git.geert+renesas@glider.be
|
|
make dtbs_check:
$nodename:0: 'i2c-10' does not match '^(i2c-?)?mux'
Fix this by renaming all I2C bus demultiplexer node names to
"i2c-mux<N>".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/63e97cb50282b3255ba9654f539b9baa8c621b30.1698068647.git.geert+renesas@glider.be
|
|
Several board DTS files contain minimal device nodes that represent
on-SoC Local Bus State Controllers (LBSC), although they belong in the
SoC-specific DTS files instead. As these device nodes are incomplete
and unused, and hamper adding proper nodes later, it is better to just
remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/76ece7602045670cbb8dff684c3366ba6eb89add.1693481518.git.geert+renesas@glider.be
|
|
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
