| Age | Commit message (Collapse) | Author |
|---|
|
This commit introduces a debugfs interface to display the contents of the
VGIC Interrupt Translation Service (ITS) tables.
The ITS tables map Device/Event IDs to Interrupt IDs and target processors.
Exposing this information through debugfs allows for easier inspection and
debugging of the interrupt routing configuration.
The debugfs interface presents the ITS table data in a tabular format:
Device ID: 0x0, Event ID Range: [0 - 31]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8192 0 0 0 0
1 8193 0 0 0 0
2 8194 0 2 2 0
Device ID: 0x18, Event ID Range: [0 - 3]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8225 0 0 0 0
1 8226 0 1 1 0
2 8227 0 3 3 0
Device ID: 0x10, Event ID Range: [0 - 7]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8229 0 3 3 1
1 8230 0 0 0 1
2 8231 0 1 1 1
3 8232 0 2 2 1
4 8233 0 3 3 1
The output is generated using the seq_file interface, allowing for efficient
handling of potentially large ITS tables.
This interface is read-only and does not allow modification of the ITS
tables. It is intended for debugging and informational purposes only.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20250220224247.2017205-1-jingzhangos@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Emulating the vGIC means emulating the dreaded Maintenance Interrupt.
This is a two-pronged problem:
- while running L2, getting an MI translates into an MI injected
in the L1 based on the state of the HW.
- while running L1, we must accurately reflect the state of the
MI line, based on the in-memory state.
The MI INTID is added to the distributor, as expected on any
virtualisation-capable implementation, and further patches
will allow its configuration.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When entering a nested VM, we set up the hypervisor control interface
based on what the guest hypervisor has set. Especially, we investigate
each list register written by the guest hypervisor whether HW bit is
set. If so, we translate hw irq number from the guest's point of view
to the real hardware irq number if there is a mapping.
Co-developed-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
[Christoffer: Redesigned execution flow around vcpu load/put]
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: Rewritten to support GICv3 instead of GICv2, NV2 support]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The ITS ABI infrastructure allows for some pretty lax code, where
the size of the data doesn't have to match the size of the entry,
potentially leading to a collection of interesting bugs.
Commit 7fe28d7e68f9 ("KVM: arm64: vgic-its: Add a data length check
in vgic_its_save_*") added some checks, but starts by implicitly
casting all writes to a 64bit value, hiding some of the issues.
Instead, introduce macros that will check the data type actually used
for dealing with the table entries. The macros are taking a symbolic
entry type that is used to fetch the size of the entry type for the
current ABI. This immediately catches a couple of low-impact gotchas
(zero values that are implicitly 32bit), easy enough to fix.
Given that we currently only have a single ABI, hardcode a couple of
BUILD_BUG_ON()s that will fire if we use anything but a 64bit quantity,
and some (currently unreachable) fallback code that may become useful
one day.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
vgic_get_irq() has an awkward signature, as it takes both a kvm
*and* a vcpu, where the vcpu is allowed to be NULL if the INTID
being looked up is a global interrupt (SPI or LPI).
This leads to potentially problematic situations where the INTID
passed is a private interrupt, but that there is no vcpu.
In order to make things less ambiguous, let have *two* helpers
instead:
- vgic_get_irq(struct kvm *kvm, u32 intid), which is only concerned
with *global* interrupts, as indicated by the lack of vcpu.
- vgic_get_vcpu_irq(struct kvm_vcpu *vcpu, u32 intid), which can
return *any* interrupt class, but must have of course a non-NULL
vcpu.
Most of the code nicely falls under one or the other situations,
except for a couple of cases (close to the UABI or in the debug code)
where we have to distinguish between the two cases.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In all the vgic_its_save_*() functinos, they do not check whether
the data length is 8 bytes before calling vgic_write_guest_lock.
This patch adds the check. To prevent the kernel from being blown up
when the fault occurs, KVM_BUG_ON() is used. And the other BUG_ON()s
are replaced together.
Cc: stable@vger.kernel.org
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with the new entry read/write helpers]
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20241107214137.428439-4-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to be consistent, we shouldn't advertise a GICv3 when none
is actually usable by the guest.
Wipe the feature when these conditions apply, and allow the field
to be written from userspace.
This now allows us to rewrite the kvm_has_gicv3 helper() in terms
of kvm_has_feat(), given that it is always evaluated at runtime.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Follow the pattern introduced with vcpu_set_hcr(), and introduce
vcpu_set_ich_hcr(), which configures the GICv3 traps at the same
point.
This will allow future changes to introduce trap configuration on
a per-VM basis.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
On a system with a GICv3, if a guest hasn't been configured with
GICv3 and that the host is not capable of GICv2 emulation,
a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2.
We therefore try to emulate the SGI access, only to hit a NULL
pointer as no private interrupt is allocated (no GIC, remember?).
The obvious fix is to give the guest what it deserves, in the
shape of a UNDEF exception.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820100349.3544850-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Get rid of unexpected unlock sparse warnings in vgic code
by adding an annotation to vgic_queue_irq_unlock().
arch/arm64/kvm/vgic/vgic.c:334:17: warning: context imbalance in 'vgic_queue_irq_unlock' - unexpected unlock
arch/arm64/kvm/vgic/vgic.c:419:5: warning: context imbalance in 'kvm_vgic_inject_irq' - different lock contexts for basic block
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240723101204.7356-4-sebott@redhat.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When tearing down a redistributor region, make sure we don't have
any dangling pointer to that region stored in a vcpu.
Fixes: e5a35635464b ("kvm: arm64: vgic-v3: Introduce vgic_v3_free_redist_region()")
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240605175637.1635653-1-maz@kernel.org
Cc: stable@vger.kernel.org
|
|
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Consolidate the GICv3 VMCR accessor hypercalls into the APR save/restore
hypercalls so that all of the EL2 GICv3 state is covered by a single pair
of hypercalls.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The MSI injection fast path has been transitioned away from the global
translation cache. Rip it out.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-12-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As the current LPI translation cache is global, the corresponding
invalidation helpers are also globally-scoped. In anticipation of
constructing a translation cache per ITS, add a helper for scoped cache
invalidations.
We still need to support global invalidations when LPIs are toggled on
a redistributor, as a property of the translation cache is that all
stored LPIs are known to be delieverable.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-8-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The last user has been transitioned to walking the LPI xarray directly.
Cut the wart off, and get rid of the now unneeded lpi_count while doing
so.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-7-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The vgic debug iterator is the final user of vgic_copy_lpi_list(), but
is a bit more complicated to transition to something else. Use a mark
in the LPI xarray to record the indices 'known' to the debug iterator.
Protect against the LPIs from being freed by associating an additional
reference with the xarray mark.
Rework iter_next() to let the xarray walk 'drive' the iteration after
visiting all of the SGIs, PPIs, and SPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The LPI xarray's xa_lock is sufficient for synchronizing writers when
freeing a given LPI. Furthermore, readers can only take a new reference
on an IRQ if it was already nonzero.
Stop taking the lpi_list_lock unnecessarily and get rid of
__vgic_put_lpi_locked().
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Stop acquiring the lpi_list_lock in favor of RCU for protecting
the read-side critical section in vgic_get_lpi(). In order for this to
be safe, we also need to be careful not to take a reference on an irq
with a refcount of 0, as it is about to be freed.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When failing to create a vcpu because (for example) it has a
duplicate vcpu_id, we destroy the vcpu. Amusingly, this leaves
the redistributor registered with the KVM_MMIO bus.
This is no good, and we should properly clean the mess. Force
a teardown of the vgic vcpu interface, including the RD device
before returning to the caller.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231207151201.3028710-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Commit 53692908b0f5 ("KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI")
removed vgic_v2_set_npie()/vgic_v3_set_npie() but not the declarations.
Commit 29eb5a3c57f7 ("KVM: arm64: Handle PtrAuth traps early") left behind
kvm_arm_vcpu_ptrauth_trap(), remove it.
Commit 2a0c343386ae ("KVM: arm64: Initialize trap registers for protected VMs")
declared but never implemented kvm_init_protected_traps() and
commit cf5d318865e2 ("arm/arm64: KVM: Turn off vcpus on PSCI shutdown/reboot")
declared but never implemented force_vm_exit().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230814140636.45988-1-yuehaibing@huawei.com
|
|
Being able to lock/unlock all vcpus in one go is a feature that
only the vgic has enjoyed so far. Let's be brave and expose it
to the world.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-7-maz@kernel.org
|
|
Currently, the unknown no-running-vcpu sites are reported when a
dirty page is tracked by mark_page_dirty_in_slot(). Until now, the
only known no-running-vcpu site is saving vgic/its tables through
KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} command on KVM device
"kvm-arm-vgic-its". Unfortunately, there are more unknown sites to
be handled and no-running-vcpu context will be allowed in these
sites: (1) KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} command
on KVM device "kvm-arm-vgic-its" to restore vgic/its tables. The
vgic3 LPI pending status could be restored. (2) Save vgic3 pending
table through KVM_DEV_ARM_{VGIC_GRP_CTRL, VGIC_SAVE_PENDING_TABLES}
command on KVM device "kvm-arm-vgic-v3".
In order to handle those unknown cases, we need a unified helper
vgic_write_guest_lock(). struct vgic_dist::save_its_tables_in_progress
is also renamed to struct vgic_dist::save_tables_in_progress.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230126235451.469087-3-gshan@redhat.com
|
|
To save the vgic LPI pending state with GICv4.1, the VPEs must all be
unmapped from the ITSs so that the sGIC caches can be flushed.
The opposite is done once the state is saved.
This is all done by using the activate/deactivate irqdomain callbacks
directly from the vgic code. Crutially, this is done without holding
the irqdesc lock for the interrupts that represent the VPE. And these
callbacks are changing the state of the irqdesc. What could possibly
go wrong?
If a doorbell fires while we are messing with the irqdesc state,
it will acquire the lock and change the interrupt state concurrently.
Since we don't hole the lock, curruption occurs in on the interrupt
state. Oh well.
While acquiring the lock would fix this (and this was Shanker's
initial approach), this is still a layering violation we could do
without. A better approach is actually to free the VPE interrupt,
do what we have to do, and re-request it.
It is more work, but this usually happens only once in the lifetime
of the VM and we don't really care about this sort of overhead.
Fixes: f66b7b151e00 ("KVM: arm64: GICv4.1: Try to save VLPI state in save_pending_tables")
Reported-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230118022348.4137094-1-sdonthineni@nvidia.com
|
|
Despite the userspace ABI clearly defining the bits dealt with by
KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO as a __u32, the kernel uses a u64.
Use a u32 to match the userspace ABI, which will subsequently lead
to some simplifications.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to start making the vgic sysreg access from userspace
similar to all the other sysregs, push the userspace memory
access one level down into vgic_v3_cpu_sysregs_uaccess().
The next step will be to rely on the sysreg infrastructure
to perform this task.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Finding out whether a sysreg exists has little to do with that
register being accessed, so drop the is_write parameter.
Also, the reg pointer is completely unused, and we're better off
just passing the attr pointer to the function.
This result in a small cleanup of the calling site, with a new
helper converting the vGIC view of a sysreg into the canonical
one (this is purely cosmetic, as the encoding is the same).
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since adversising GICR_CTLR.{IC,CES} is directly observable from
a guest, we need to make it selectable from userspace.
For that, bump the default GICD_IIDR revision and let userspace
downgrade it to the previous default. For GICv2, the two distributor
revisions are strictly equivalent.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-5-maz@kernel.org
|
|
Since GICv4.1, it has become legal for an implementation to advertise
GICR_{INVLPIR,INVALLR,SYNCR} while having an ITS, allowing for a more
efficient invalidation scheme (no guest command queue contention when
multiple CPUs are generating invalidations).
Provide the invalidation registers as a primitive to their ITS
counterpart. Note that we don't advertise them to the guest yet
(the architecture allows an implementation to do this).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220405182327.205520-4-maz@kernel.org
|
|
When disabling LPIs, a guest needs to poll GICR_CTLR.RWP in order
to be sure that the write has taken effect. We so far reported it
as 0, as we didn't advertise that LPIs could be turned off the
first place.
Start tracking this state during which LPIs are being disabled,
and expose the 'in progress' state via the RWP bit.
We also take this opportunity to disallow enabling LPIs and programming
GICR_{PEND,PROP}BASER while LPI disabling is in progress, as allowed by
the architecture (UNPRED behaviour).
We don't advertise the feature to the guest yet (which is allowed by
the architecture).
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-3-maz@kernel.org
|
|
There are no more users of vgic_check_ioaddr(). Move its checks to
vgic_check_iorange() and then remove it.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-6-ricarkol@google.com
|
|
Add the new vgic_check_iorange helper that checks that an iorange is
sane: the start address and size have valid alignments, the range is
within the addressable PA range, start+size doesn't overflow, and the
start wasn't already defined.
No functional change.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-2-ricarkol@google.com
|
|
When a mapped level interrupt (a timer, for example) is deactivated
by the guest, the corresponding host interrupt is equally deactivated.
However, the fate of the pending state still needs to be dealt
with in SW.
This is specially true when the interrupt was in the active+pending
state in the virtual distributor at the point where the guest
was entered. On exit, the pending state is potentially stale
(the guest may have put the interrupt in a non-pending state).
If we don't do anything, the interrupt will be spuriously injected
in the guest. Although this shouldn't have any ill effect (spurious
interrupts are always possible), we can improve the emulation by
detecting the deactivation-while-pending case and resample the
interrupt.
While we're at it, move the logic into a common helper that can
be shared between the two GIC implementations.
Fixes: e40cc57bac79 ("KVM: arm/arm64: vgic: Support level-triggered mapped interrupts")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Tested-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210819180305.1670525-1-maz@kernel.org
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To improve the readability, we introduce the new
vgic_v3_free_redist_region helper and also rename
vgic_v3_insert_redist_region into vgic_v3_alloc_redist_region
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-8-eric.auger@redhat.com
|
|
With GICv4.1 and the vPE unmapped, which indicates the invalidation
of any VPT caches associated with the vPE, we can get the VLPI state
by peeking at the VPT. So we add a function for this.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210322060158.1584-4-lushenming@huawei.com
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
|
|
Now that the 32bit KVM/arm host is a distant memory, let's move the
whole of the KVM/arm64 code into the arm64 tree.
As they said in the song: Welcome Home (Sanitarium).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200513104034.74741-1-maz@kernel.org
|
