| Age | Commit message (Collapse) | Author |
|---|
|
The branch instructions beq, bne, blt, bge, bltu, bgeu and jirl belong
to the format reg2i16, but the sequence of oprand is different for the
instruction jirl. So adjust the parameter order of emit_jirl() to make
it more readable correspond with the Instruction Set Architecture manual.
Here are the instruction formats:
beq rj, rd, offs16
bne rj, rd, offs16
blt rj, rd, offs16
bge rj, rd, offs16
bltu rj, rd, offs16
bgeu rj, rd, offs16
jirl rd, rj, offs16
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#branch-instructions
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch defines UPROBE_SWBP_INSN as a function call and this breaks
arch_uprobe_trampoline() which uses it to initialize a static variable.
Add the new "__builtin_constant_p" helper, __emit_break(), and redefine
the current users of larch_insn_gen_break() to use it.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240614174822.GA1185149@thelio-3990X/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When VM runs in kvm mode, system will not exit to host mode when
executing a general software breakpoint instruction such as INSN_BREAK,
trap exception happens in guest mode rather than host mode. In order to
debug guest kernel on host side, one mechanism should be used to let VM
exit to host mode.
Here a hypercall instruction with a special code is used for software
breakpoint usage. VM exits to host mode and kvm hypervisor identifies
the special hypercall code and sets exit_reason with KVM_EXIT_DEBUG. And
then let qemu handle it.
Idea comes from ppc kvm, one api KVM_REG_LOONGARCH_DEBUG_INST is added
to get the hypercall code. VMM needs get sw breakpoint instruction with
this api and set the corresponding sw break point for guest kernel.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Instruction cpucfg can be used to get processor features. And there
is a trap exception when it is executed in VM mode, and also it can be
used to provide cpu features to VM. On real hardware cpucfg area 0 - 20
is used by now. Here one specified area 0x40000000 -- 0x400000ff is used
for KVM hypervisor to provide PV features, and the area can be extended
for other hypervisors in future. This area will never be used for real
HW, it is only used by software.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
|
|
This patch adds more instruction opcodes and their corresponding emit_*
helpers which will be used in later patches.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Implement kvm handle vcpu iocsr exception, setting the iocsr info into
vcpu_run and return to user space to handle it.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There exist various break insns such as BRK_KPROBE_BP, BRK_KPROBE_SSTEPBP,
BRK_UPROBE_BP and BRK_UPROBE_XOLBP, add larch_insn_gen_break() to generate
break insns simpler, this is preparation for later patch.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like llsc instructions, the atomic memory access instructions shouldn't
be supported for probing, so check for them in insns_not_supported().
Closes: https://lore.kernel.org/all/SY4P282MB351877A70A0333C790FE85A5C09C9@SY4P282MB3518.AUSP282.PROD.OUTLOOK.COM/
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The three functions insns_not_supported(), insns_need_simulation() and
arch_simulate_insn() will be used for uprobes, move them from kprobes.c
to inst.c, this is preparation for later patch, no functionality change.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add guard for the larch_insn_gen_xxx functions to verify whether the
immediate operand is within the acceptable range.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
SEGV_BNDERR was introduced initially for supporting the Intel MPX, but
fell into disuse after the MPX support was removed. The LoongArch
bounds-checking instructions behave very differently than MPX, but
overall the interface is still kind of suitable for conveying the
information to userland when bounds-checking assertions trigger, so we
wouldn't have to invent more UAPI. Specifically, when the BCE triggers,
a SEGV_BNDERR is sent to userland, with si_addr set to the out-of-bounds
address or value (in asrt{gt,le}'s case), and one of si_lower or
si_upper set to the configured bound depending on the faulting
instruction. The other bound is set to either 0 or ULONG_MAX to resemble
a range with both lower and upper bounds.
Note that it is possible to have si_addr == si_lower in case of a
failing asrtgt or {ld,st}gt, because those instructions test for strict
greater-than relationship. This should not pose a problem for userland,
though, because the faulting PC is available for the application to
associate back to the exact instruction for figuring out the
expectation.
Example exception context generated by a faulting `asrtgt.d t0, t1`
(assert t0 > t1 or BCE) with t0=100 and t1=200:
> pc 00005555558206a4 ra 00007ffff2d854fc tp 00007ffff2f2f180 sp 00007ffffbf9fb80
> a0 0000000000000002 a1 00007ffffbf9fce8 a2 00007ffffbf9fd00 a3 00007ffff2ed4558
> a4 0000000000000000 a5 00007ffff2f044c8 a6 00007ffffbf9fce0 a7 fffffffffffff000
> t0 0000000000000064 t1 00000000000000c8 t2 00007ffffbfa2d5e t3 00007ffff2f12aa0
> t4 00007ffff2ed6158 t5 00007ffff2ed6158 t6 000000000000002e t7 0000000003d8f538
> t8 0000000000000005 u0 0000000000000000 s9 0000000000000000 s0 00007ffffbf9fce8
> s1 0000000000000002 s2 0000000000000000 s3 00007ffff2f2c038 s4 0000555555820610
> s5 00007ffff2ed5000 s6 0000555555827e38 s7 00007ffffbf9fd00 s8 0000555555827e38
> ra: 00007ffff2d854fc
> ERA: 00005555558206a4
> CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
> PRMD: 00000007 (PPLV3 +PIE -PWE)
> EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
> ECFG: 0007181c (LIE=2-4,11-12 VS=7)
> ESTAT: 000a0000 [BCE] (IS= ECode=10 EsubCode=0)
> PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Kprobes allows you to trap at almost any kernel address and execute a
callback function, this commit adds kprobes support for LoongArch.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
According to LoongArch Reference Manual, simulate branch and PC*
instructions, this is preparation for later patch.
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#branch-instructions
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_pcaddi_pcaddu121_pcaddu18l_pcalau12i
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP handling. This implies defining
arch_has_single_step() and implementing the user_enable_single_step()
and user_disable_single_step() functions.
LoongArch cannot do hardware single-stepping per se, the hardware
single-stepping it is achieved by configuring the instruction fetch
watchpoints (FWPS) and specifies that the next instruction must trigger
the watch exception by setting the mask bit. In some scenarios
CSR.FWPS.Skip is used to ignore the next hit result, avoid endless
repeated triggering of the same watchpoint without canceling it.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Simplify larch_insn_gen_xxx implementation by reusing emit_xxx.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There exists a common function sign_extend64() to sign extend a 64-bit
value using specified bit as sign-bit in include/linux/bitops.h, it is
more efficient, let us use it and remove the arch-specific sign_extend()
under arch/loongarch.
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch implements ftrace trampolines through plt entry.
Tested by forcing ftrace_make_call() to use the module PLT, and then
loading up a module after setting up ftrace with:
| echo ":mod:<module-name>" > set_ftrace_filter;
| echo function > current_tracer;
| modprobe <module-name>
Since FTRACE_ADDR/FTRACE_REGS_ADDR is only defined when CONFIG_DYNAMIC_
FTRACE is selected, we wrap their usage in module_init_ftrace_plt() with
ifdeffery rather than using IS_ENABLED().
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The compiler has inserted 2 NOPs before the regular function prologue.
T series registers are available and safe because of LoongArch's psABI.
At runtime, we can replace nop with bl to enable ftrace call and replace
bl with nop to disable ftrace call. The bl instruction requires us to
save the original RA value, so it saves RA at t0 here.
Details are:
| Compiled | Disabled | Enabled |
+------------+------------------------+------------------------+
| nop | move t0, ra | move t0, ra |
| nop | nop | bl ftrace_caller |
| func_body | func_body | func_body |
The RA value will be recovered by ftrace_regs_entry, and restored into
RA before returning to the regular function prologue. When a function is
not being traced, the "move t0, ra" is not harmful.
1) ftrace_make_call, ftrace_make_nop (in kernel/ftrace.c)
The two functions turn each recorded call site of filtered functions
into a call to ftrace_caller or nops.
2) ftracce_update_ftrace_func (in kernel/ftrace.c)
turns the nops at ftrace_call into a call to a generic entry for
function tracers.
3) ftrace_caller (in kernel/mcount_dyn.S)
The entry where each _mcount call sites calls to once they are
filtered to be traced.
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Introduce the "alternative" mechanism from ARM64 and x86 for LoongArch
to apply runtime patching. The main purpose of this patch is to provide
a framework. In future we can use this mechanism (i.e., the ALTERNATIVE
and ALTERNATIVE_2 macros) to optimize hotspot functions according to cpu
features.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson-2 series (Loongson-2K500, Loongson-2K1000) don't support
unaligned access in hardware, while Loongson-3 series (Loongson-3A5000,
Loongson-3C5000) are configurable whether support unaligned access in
hardware. This patch add unaligned access emulation for those LoongArch
processors without hardware support.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
BPF programs are normally handled by a BPF interpreter, add BPF JIT
support for LoongArch to allow the kernel to generate native code when
a program is loaded into the kernel. This will significantly speed-up
processing of BPF programs.
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
According to the "Table of Instruction Encoding" in LoongArch Reference
Manual [1], add some instruction opcodes and formats which are used in
the BPF JIT for LoongArch.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#table-of-instruction-encoding
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
{signed,unsigned}_imm_check() will also be used in the bpf jit, so move
them from module.c to inst.h, this is preparation for later patches.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
It unwind the stack frame based on prologue code analyze.
CONFIG_KALLSYMS is needed, at least the address and length
of each function.
Three stages when we do unwind,
1) unwind_start(), the prapare of unwinding, fill unwind_state.
2) unwind_done(), judge whether the unwind process is finished or not.
3) unwind_next_frame(), unwind the next frame.
Dividing unwinder helps to add new unwinders in the future, e.g.:
unwinder_frame, unwinder_orc, .etc.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add some other common headers for basic LoongArch support.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
