summaryrefslogtreecommitdiff
path: root/arch/riscv/include/asm/cache.h
AgeCommit message (Collapse)Author
2024-04-30riscv: mm: still create swiotlb buffer for kmalloc() bouncing if requiredJisheng Zhang
After commit f51f7a0fc2f4 ("riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent"), for non-coherent platforms with less than 4GB memory, we rely on users to pass "swiotlb=mmnn,force" kernel parameters to enable DMA bouncing for unaligned kmalloc() buffers. Now let's go further: If no bouncing needed for ZONE_DMA, let kernel automatically allocate 1MB swiotlb buffer per 1GB of RAM for kmalloc() bouncing on non-coherent platforms, so that no need to pass "swiotlb=mmnn,force" any more. The math of "1MB swiotlb buffer per 1GB of RAM for kmalloc() bouncing" is taken from arm64. Users can still force smaller swiotlb buffer by passing "swiotlb=mmnn". Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240325110036.1564-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-23riscv: allow kmalloc() caches aligned to the smallest valueJisheng Zhang
Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E 64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus it brings some bad effects to coherent platforms: Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and kmalloc-8 slab caches don't exist any more, they are replaced with either kmalloc-128 or kmalloc-64. Secondly, larger than necessary kmalloc aligned allocations results in unnecessary cache/TLB pressure. This issue also exists on arm64 platforms. From last year, Catalin tried to solve this issue by decoupling ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN, limiting kmalloc() minimum alignment to dma_get_cache_alignment() and replacing ARCH_KMALLOC_MINALIGN usage in various drivers with ARCH_DMA_MINALIGN etc.[1] One fact we can make use of for riscv: if the CPU doesn't support ZICBOM or T-HEAD CMO, we know the platform is coherent. Based on Catalin's work and above fact, we can easily solve the kmalloc align issue for riscv: we can override dma_get_cache_alignment(), then let it return ARCH_DMA_MINALIGN at the beginning and return 1 once we know the underlying HW neither supports ZICBOM nor supports T-HEAD CMO. So what about if the CPU supports ZICBOM or T-HEAD CMO, but all the devices are dma coherent? Well, we use ARCH_DMA_MINALIGN as the kmalloc minimum alignment, nothing changed in this case. This case can be improved in the future. After this patch, a simple test of booting to a small buildroot rootfs on qemu shows: kmalloc-96 5041 5041 96 ... kmalloc-64 9606 9606 64 ... kmalloc-32 5128 5128 32 ... kmalloc-16 7682 7682 16 ... kmalloc-8 10246 10246 8 ... So we save about 1268KB memory. The saving will be much larger in normal OS env on real HW platforms. Link: https://lore.kernel.org/linux-arm-kernel/20230524171904.3967031-1-catalin.marinas@arm.com/ [1] Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230718152214.2907-2-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-28riscv: Add support for non-coherent devices using zicbom extensionHeiko Stuebner
The Zicbom ISA-extension was ratified in november 2021 and introduces instructions for dcache invalidate, clean and flush operations. Implement cache management operations for non-coherent devices based on them. Of course not all cores will support this, so implement an alternative-based mechanism that replaces empty instructions with ones done around Zicbom instructions. As discussed in previous versions, assume the platform being coherent by default so that non-coherent devices need to get marked accordingly by firmware. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220706231536.2041855-4-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2019-11-17riscv: add nommu supportChristoph Hellwig
The kernel runs in M-mode without using page tables, and thus can't run bare metal without help from additional firmware. Most of the patch is just stubbing out code not needed without page tables, but there is an interesting detail in the signals implementation: - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO entry point, but the ELF VDSO is not supported for nommu Linux. We instead copy the code to call the syscall onto the stack. In addition to enabling the nommu code a new defconfig for a small kernel image that can run in nommu mode on qemu is also provided, to run a kernel in qemu you can use the following command line: qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \ -kernel arch/riscv/boot/loader \ -drive file=rootfs.ext2,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards around PCI_IOBASE definition to fix build issues; fixed checkpatch issues; move the PCI_IO_* and VMEMMAP address space macros along with the others; resolve sparse warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 97 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-26RISC-V: Init and Halt CodePalmer Dabbelt
This contains the various __init C functions, the initial assembly kernel entry point, and the code to reset the system. When a file was init-related this patch contains the entire file. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>