summaryrefslogtreecommitdiff
path: root/drivers/accel/ivpu/ivpu_ipc.h
AgeCommit message (Collapse)Author
2025-01-09accel/ivpu: Use workqueue for IRQ handlingMaciej Falkowski
Convert IRQ bottom half from the thread handler into workqueue. This increases a stability in rare scenarios where driver on debugging/hardening kernels processes IRQ too slow and misses some interrupts due to it. Workqueue handler also gives a very minor performance increase. Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-6-maciej.falkowski@linux.intel.com
2024-10-11accel/ivpu: Prevent recovery invocation during probe and resumeKarol Wachowski
Refactor IPC send and receive functions to allow correct handling of operations that should not trigger a recovery process. Expose ivpu_send_receive_internal(), which is now utilized by the D0i3 entry, DCT initialization, and HWS initialization functions. These functions have been modified to return error codes gracefully, rather than initiating recovery. The updated functions are invoked within ivpu_probe() and ivpu_resume(), ensuring that any errors encountered during these stages result in a proper teardown or shutdown sequence. The previous approach of triggering recovery within these functions could lead to a race condition, potentially causing undefined behavior and kernel crashes due to null pointer dereferences. Fixes: 45e45362e095 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()") Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW state dump on TDRTomasz Rusinowicz
Send JSM state dump message at the beginning of TDR handler. This allows FW to collect debug info in the FW log before the state of the NPU is lost allowing to analyze the cause of a TDR. Wait a predefined timeout (10 ms) so the FW has a chance to write debug logs. We cannot wait for JSM response at this point because IRQs are already disabled before TDR handler is invoked. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-06-14accel/ivpu: Abort jobs of faulty contextMaciej Falkowski
Abort all jobs that belong to contexts generating MMU faults in order to avoid flooding host with MMU IRQs. Jobs are cancelled with: - SSID_RELEASE command when OS scheduling is enabled - DESTROY_CMDQ command when HW scheduling is enabled Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com> Co-developed-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-3-jacek.lawrynowicz@linux.intel.com
2024-05-17accel/ivpu: Replace wake_thread with kfifoJacek Lawrynowicz
Use kfifo to pass IRQ sources to IRQ thread so it will be possible to use IRQ thread by multiple IRQ types. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-4-jacek.lawrynowicz@linux.intel.com
2023-11-16accel/ivpu: Use threaded IRQ to handle JOB done messagesJacek Lawrynowicz
Remove job_done thread and replace it with generic callback based mechanism. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-6-jacek.lawrynowicz@linux.intel.com
2023-11-16accel/ivpu: Rename cons->rx_msg_lockStanislaw Gruszka
Now the cons->rx_msg_lock also protects 'abort' field so rename the lock. Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-2-jacek.lawrynowicz@linux.intel.com
2023-10-31accel/ivpu: Abort pending rx ipc on resetStanislaw Gruszka
Waking up process, which wait for particular condition, will go to sleep again on wake_up() if the condition is not met. Add abort flag to wake up IPC receivers, which will finish with -ECANCELED error. This is only needed for reset, run time power management prevent to suspend VPU when there is pending IPC processing or pending job. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-5-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Introduce ivpu_ipc_send_receive_active()Karol Wachowski
Split ivpu_ipc_send_receive() implementation to have a version that does not call pm_runtime_resume_and_get(). That implementation can be invoked when device is up and runtime resume is prohibited (for example at the end of boot sequence). The new function will be used for D0i3 entry IPC message addition in the separate change. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-10-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Fix IPC buffer header status field valueAndrzej Kacprowski
IPC messages transmitted to the device must be marked as allocated - status field must be set to 1. The VPU driver has IVPU_IPC_HDR_ALLOCATED incorrectly defined. Future VPU firmware versions will reject all IPC messages with invalid status and will not work with a VPU driver that is missing this fix. Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages") Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-9-stanislaw.gruszka@linux.intel.com
2023-01-19accel/ivpu: Add IPC driver and JSM messagesJacek Lawrynowicz
The IPC driver is used to send and receive messages to/from firmware running on the VPU. The only supported IPC message format is Job Submission Model (JSM) defined in vpu_jsm_api.h header. Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-5-jacek.lawrynowicz@linux.intel.com
generated by cgit (git 2.34.1) at 2025-07-25 17:37:06 +0000