summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/xe
AgeCommit message (Collapse)Author
8 daysdrm/xe/pf: Resend PF provisioning after GT resetMichal Wajdeczko
If we reload the GuC due to suspend/resume or GT reset then we have to resend not only any VFs provisioning data, but also PF configuration, like scheduling parameters (EQ, PT), as otherwise GuC will continue to use default values. Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://lore.kernel.org/r/20250711193316.1920-3-michal.wajdeczko@intel.com (cherry picked from commit 1c38dd6afa4a8ecce28e94da794fd1d205c30f51) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
8 daysdrm/xe/pf: Prepare to stop SR-IOV support prior GT resetMichal Wajdeczko
As part of the resume or GT reset, the PF driver schedules work which is then used to complete restarting of the SR-IOV support, including resending to the GuC configurations of provisioned VFs. However, in case of short delay between those two actions, which could be seen by triggering a GT reset on the suspened device: $ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset this PF worker might be still busy, which lead to errors due to just stopped or disabled GuC CTB communication: [ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed [ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe] [ ] xe 0000:00:02.0: [drm] GT0: reset queued [ ] xe 0000:00:02.0: [drm] GT0: reset started [ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped [ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled! [ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED) [ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED) [ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled [ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV) [ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV) [ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations [ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed While this VFs reprovisioning will be successful during next spin of the worker, to avoid those errors, make sure to cancel restart worker if we are about to trigger next reset. Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com (cherry picked from commit 9f50b729dd61dfb9f4d7c66900d22a7c7353a8c0) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
8 daysdrm/xe/migrate: Fix alignment checkLucas De Marchi
The check would fail if the address is unaligned, but not when accounting the offset. Instead of `buf | offset` it should have been `buf + offset`. To make it more readable and also drop the uintptr_t, just use the IS_ALIGNED() macro. Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/20250710-migrate-aligned-v1-1-44003ef3c078@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 81e139db6900503a2e68009764054fad128fbf95) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
8 daysdrm/xe: Move page fault init after topology initMatthew Brost
We need the topology to determine GT page fault queue size, move page fault init after topology init. Cc: stable@vger.kernel.org Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com (cherry picked from commit beb72acb5b38dbe670d8eb752d1ad7a32f9c4119) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
8 daysdrm/xe/mocs: Initialize MOCS index earlyBalasubramani Vivekanandan
MOCS uc_index is used even before it is initialized in the following callstack guc_prepare_xfer() __xe_guc_upload() xe_guc_min_load_for_hwconfig() xe_uc_init_hwconfig() xe_gt_init_hwconfig() Do MOCS index initialization earlier in the device probe. Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com> Link: https://lore.kernel.org/r/20250520142445.2792824-1-balasubramani.vivekanandan@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 241cc827c0987d7173714fc5a95a7c8fc9bf15c0) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
8 daysdrm/xe/migrate: fix copy direction in access_memoryMatthew Auld
After we do the modification on the host side, ensure we write the result back to VRAM and not the other way around, otherwise the modification will be lost if treated like a read. Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com (cherry picked from commit c12fe703cab93f9d8bfe0ff32b58e7b1fd52be1f) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
8 daysdrm/xe: Dont skip TLB invalidations on VFTejas Upadhyay
Skipping TLB invalidations on VF causing unrecoverable faults. Probable reason for skipping TLB invalidations on SRIOV could be lack of support for instruction MI_FLUSH_DW_STORE_INDEX. Add back TLB flush with some additional handling. Helps in resolving, [ 704.913454] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]] ASID: 0 VFID: 0 PDATA: 0x0d92 Faulted Address: 0x0000000002fa0000 FaultType: 0 AccessType: 1 FaultLevel: 0 EngineClass: 3 bcs EngineInstance: 8 [ 704.913551] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]] Fault response: Unsuccessful -22 V2: - Use Xmas tree (MichalW) Suggested-by: Matthew Brost <matthew.brost@intel.com> Fixes: 97515d0b3ed92 ("drm/xe/vf: Don't emit access to Global HWSP if VF") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710045945.1023840-1-tejas.upadhyay@intel.com Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> (cherry picked from commit b528e896fa570844d654b5a4617a97fa770a1030) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/guc: Default log level to non-verboseLucas De Marchi
Currently xe sets the guc log level to a verbose level since it's useful to debug hangs and general development. However the verbose level may already be too much and affect performance. Michal Mrozek did some tests with the L0 compute stack for submission latency with ULLS disabled. Below are the normalized numbers with log level 3 (the current default) as baseline for each test: Test \ Log Level 3 0 1 2 ----------------------------------------------------------- ------ ------ ------ ------ BestWalkerNthCommandListSubmission(CmdListCount=2) 1.00 0.63 0.63 0.96 BestWalkerNthSubmission(KernelCount=2) 1.00 0.62 0.63 0.96 BestWalkerNthSubmissionImmediate(KernelCount=2) 1.00 0.58 0.58 0.85 BestWalkerSubmission 1.00 0.62 0.62 0.96 BestWalkerSubmissionImmediate 1.00 0.63 0.62 0.96 BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=2) 1.00 0.58 0.58 0.86 BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=4) 1.00 0.70 0.70 0.83 BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=8) 1.00 0.53 0.52 0.78 Log level 2 is the first "verbose level" for GuC, where the biggest difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds. Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250613-guc-log-level-v2-1-cb84a63e49fe@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit a37128ba613ad6a5f81f382fa3cfe5c4a6527310) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/bmg: Don't use WA 16023588340 and 22019338487 on VFMichal Wajdeczko
These workarounds are not applicable for use by the VFs. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Jakub Kolakowski <jakub1.kolakowski@intel.com> Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com> Link: https://lore.kernel.org/r/20250710103040.375610-2-jakub1.kolakowski@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 1d2e2503e506ddc499cbb7afdc8b70bcf6fe241f) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/guc: Recommend GuC v70.46.2 for BMG, LNL, DG2Julia Filipchuk
UAPI compatibility version 1.22.2 Resolves various bugs. Recommend newer version. Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250626182805.1701096-13-daniele.ceraolospurio@intel.com (cherry picked from commit 0b64addcae7f04745bc5f62d41e27268052f812e) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/pm: Correct comment of xe_pm_set_vram_threshold()Shuicheng Lin
The parameter threshold is with size in MiB, not in bits. Correct it to avoid any confusion. v2: s/mb/MiB, s/vram/VRAM, fix return section. (Michal) Fixes: 30c399529f4c ("drm/xe: Document Xe PM component") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://lore.kernel.org/r/20250708021450.3602087-2-shuicheng.lin@intel.com Reviewed-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 0efec0500117947f924e5ac83be40f96378af85a) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe: Release runtime pm for error path of xe_devcoredump_read()Shuicheng Lin
xe_pm_runtime_put() is missed to be called for the error path in xe_devcoredump_read(). Add function description comments for xe_devcoredump_read() to help understand it. v2: more detail function comments and refine goto logic (Matt) Fixes: c4a2e5f865b7 ("drm/xe: Add devcoredump chunking") Cc: stable@vger.kernel.org Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250707004911.3502904-6-shuicheng.lin@intel.com (cherry picked from commit 017ef1228d735965419ff118fe1b89089e772c42) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/pm: Restore display pm if there is error after display suspendShuicheng Lin
xe_bo_evict_all() is called after xe_display_pm_suspend(). So if there is error with xe_bo_evict_all(), display pm should be restored. Fixes: 51462211f4a9 ("drm/xe/pxp: add PXP PM support") Fixes: cb8f81c17531 ("drm/xe/display: Make display suspend/resume work on discrete") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://lore.kernel.org/r/20250708035424.3608190-2-shuicheng.lin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 83dcee17855c4e5af037ae3262809036de127903) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-07drm/xe/bmg: fix compressed VRAM handlingMatthew Auld
There looks to be an issue in our compression handling when the BO pages are very fragmented, where we choose to skip the identity map and instead fall back to emitting the PTEs by hand when migrating memory, such that we can hopefully do more work per blit operation. However in such a case we need to ensure the src PTEs are correctly tagged with a compression enabled PAT index on dgpu xe2+, otherwise the copy will simply treat the src memory as uncompressed, leading to corruption if the memory was compressed by the user. To fix this pass along use_comp_pat into emit_pte() on the src side, to indicate that compression should be considered. v2 (Jonathan): tweak the commit message Fixes: 523f191cc0c7 ("drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Akshata Jahagirdar <akshata.jahagirdar@intel.com> Cc: <stable@vger.kernel.org> # v6.12+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250701103949.83116-2-matthew.auld@intel.com (cherry picked from commit f7a2fd776e57bd6468644bdecd91ab3aba57ba58) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-07Revert "drm/xe/xe2: Enable Indirect Ring State support for Xe2"Matthew Brost
This reverts commit fe0154cf8222d9e38c60ccc124adb2f9b5272371. Seeing some unexplained random failures during LRC context switches with indirect ring state enabled. The failures were always there, but the repro rate increased with the addition of WA BB as a separate BO. Commit 3a1edef8f4b5 ("drm/xe: Make WA BB part of LRC BO") helped to reduce the issues in the context switches, but didn't eliminate them completely. Indirect ring state is not required for any current features, so disable for now until failures can be root caused. Cc: stable@vger.kernel.org Fixes: fe0154cf8222 ("drm/xe/xe2: Enable Indirect Ring State support for Xe2") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250702035846.3178344-1-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 03d85ab36bcbcbe9dc962fccd3f8e54d7bb93b35) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-07drm/xe: Allocate PF queue size on pow2 boundaryMatthew Brost
CIRC_SPACE does not work unless the size argument is a power of 2, allocate PF queue size on power of 2 boundary. Cc: stable@vger.kernel.org Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size") Fixes: 29582e0ea75c ("drm/xe: Add page queue multiplier") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://lore.kernel.org/r/20250702213511.3226167-1-matthew.brost@intel.com (cherry picked from commit 491b9783126303755717c0cbde0b08ee59b6abab) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-07drm/xe/pf: Clear all LMTT pages on allocMichal Wajdeczko
Our LMEM buffer objects are not cleared by default on alloc and during VF provisioning we only setup LMTT PTEs for the actually provisioned LMEM range. But beyond that valid range we might leave some stale data that could either point to some other VFs allocations or even to the PF pages. Explicitly clear all new LMTT page to avoid the risk that a malicious VF would try to exploit that gap. While around add asserts to catch any undesired PTE overwrites and low-level debug traces to track LMTT PT life-cycle. Fixes: b1d204058218 ("drm/xe/pf: Introduce Local Memory Translation Table") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Lukasz Laguna <lukasz.laguna@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://lore.kernel.org/r/20250701220052.1612-1-michal.wajdeczko@intel.com (cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-03drm/xe: Do not wedge device on killed exec queuesMatthew Brost
When a user closes an exec queue or interrupts an app with Ctrl-C, this does not warrant wedging the device in mode 2. Avoid this by skipping the wedge check for killed exec queues in the TDR and LR exec queue cleanup worker. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250624174103.2707941-1-matthew.brost@intel.com (cherry picked from commit 5a2f117a80c207372513ca8964eeb178874f4990) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-03drm/xe: Extend WA 14018094691 to BMGDaniele Ceraolo Spurio
This WA is applicable to BMG as well. Note that this is a GSC WA and we don't load the GSC on BMG, so extending the WA to BMG won't do anything right now. However, it helps future-proof the driver so that if we ever turn the GSC on we won't have to remember to extend this WA. v2: don't use VERSION_RANGE from 2001 to 2004 (Matt) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250613231128.1261815-2-daniele.ceraolospurio@intel.com (cherry picked from commit 1a5ce0c5b95b0624ebd44f574b98003a466973be) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe: Allow dropping kunit dependency as built-inHarry Austen
Fix Kconfig symbol dependency on KUNIT, which isn't actually required for XE to be built-in. However, if KUNIT is enabled, it must be built-in too. Fixes: 08987a8b6820 ("drm/xe: Fix build with KUNIT=m") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Harry Austen <hpausten@protonmail.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20250627-xe-kunit-v2-2-756fe5cd56cf@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit a559434880b320b83733d739733250815aecf1b0) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe: Fix kconfig promptLucas De Marchi
The xe driver is the official driver for Intel Xe2 and later, while maintaining experimental support for earlier GPUs. Reword the help message accordingly. Reviewed-by: Maarten Lankhorst <dev@lankhorst.se> Link: https://lore.kernel.org/r/20250611-xe-kconfig-help-v1-1-8bcc6b47d11a@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 1488a3089de3d0bcdc9532da7ce04cf0af9d7dd0) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe/bmg: Update Wa_22019338487Vinay Belgaumkar
Limit GT max frequency to 2600MHz and wait for frequency to reduce before proceeding with a transient flush. This is really only needed for the transient flush: if L2 flush is needed due to 16023588340 then there's no need to do this additional wait since we are already using the bigger hammer. v2: Use generic names, ensure user set max frequency requests wait for flush to complete (Rodrigo) v3: - User requests wait via wait_var_event_timeout (Lucas) - Close races on flush + user requests (Lucas) - Fix xe_guc_pc_remove_flush_freq_limit() being called on last gt rather than root gt (Lucas) v4: - Only apply the freq reducing part if a TDF is needed: L2 flush trumps the need for waiting a lower frequency Fixes: aaa08078e725 ("drm/xe/bmg: Apply Wa_22019338487") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-4-b888388477f2@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit deea6a7d6d803d6bb874a3e6f1b312e560e6c6df) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe/bmg: Update Wa_14022085890Vinay Belgaumkar
Set GT min frequency to 1200Mhz once driver load is complete. v2: Review comments (Rodrigo) v3: Apply Wa earlier so user_req_min is not clobbered. v4: Apply to all GTs (Lucas) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-3-94ba5dcc1e30@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit bdde16c9ac5cb56ad2ee19792222fa1853577af7) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe: Split xe_device_td_flush()Lucas De Marchi
xe_device_td_flush() has 2 possible implementations: an entire L2 flush or a transient flush, depending on WA 16023588340. Make this clear by splitting the function so it calls each of them. Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-3-b888388477f2@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 5e300ed8a545bdffc26b579c526b5fef7b2d5365) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe/xe_guc_pc: Lock once to update stashed frequenciesLucas De Marchi
pc_set_mert_freq_cap() currently lock()/unlock() the mutex multiple times to stash the current frequencies. It's not a problem since xe_guc_pc_restore_stashed_freq() is guaranteed to be called only later in the init sequence. However, now that we have _locked() variants for this functions, use them and avoid potential issues when called from other places or using the same pattern. While at it, prefer and early return for the WA check to reduce indentation. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-2-b888388477f2@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit d878c97daa603573e5af01fd8beec2fffdb42ad1) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe/guc_pc: Add _locked variant for min/max freqLucas De Marchi
There are places in which the getters/setters are called one after the other causing a multiple lock()/unlock(). These are not currently a problem since they are all happening from the same thread, but there's a race possibility as calls are added outside of the early init when the max/min and stashed values need to be correlated. Add the _locked() variants to prepare for that. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-1-b888388477f2@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 1beae9aa2b88d3a02eb666e7b777eb2d7bc645f4) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe: Make WA BB part of LRC BOMatthew Brost
No idea why, but without this GuC context switches randomly fail when running IGTs in a loop. Need to follow up why this fixes the aforementioned issue but can live with a stable driver for now. Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://lore.kernel.org/r/20250612031925.4009701-1-matthew.brost@intel.com (cherry picked from commit 3a1edef8f4b58b0ba826bc68bf4bce4bdf59ecf3) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-01drm/xe: Fix out-of-bounds field write in MI_STORE_DATA_IMMJia Yao
According to Bspec, bits 0~9 of MI_STORE_DATA_IMM must not exceed 0x3FE. The macro MI_SDI_NUM_QW(x) evaluates to 2 * x + 1, which means the condition 2 * x + 1 <= 0x3FE must be satisfied. Therefore, the maximum valid value for x is 0x1FE, not 0x1FF. v2 - Replace 0x1fe with macro MAX_PTE_PER_SDI (Auld, Matthew & Patelczyk, Maciej) v3 - Change macro MAX_PTE_PER_SDI from 0x1fe to 0x1feU (De Marchi, Lucas) Bspec: 60246 Fixes: 9c44fd5f6e8a ("drm/xe: Add migrate layer functions for SVM support") Cc: Matthew Brost <matthew.brost@intel.com> Cc: Brian3 Nguyen <brian3.nguyen@intel.com> Cc: Alex Zuo <alex.zuo@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Maciej Patelczyk <maciej.patelczyk@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Suggested-by: Shuicheng Lin <shuicheng.lin@intel.com> Signed-off-by: Jia Yao <jia.yao@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Link: https://lore.kernel.org/r/20250612224620.161105-1-jia.yao@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit c038bdba98c9f6a36378044a9d4385531a194d3e) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-06-26drm/xe: Process deferred GGTT node removals on device unwindMichal Wajdeczko
While we are indirectly draining our dedicated workqueue ggtt->wq that we use to complete asynchronous removal of some GGTT nodes, this happends as part of the managed-drm unwinding (ggtt_fini_early), which could be later then manage-device unwinding, where we could already unmap our MMIO/GMS mapping (mmio_fini). This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes) and this was leading to: [ ] BUG: unable to handle page fault for address: ffffc900058162a0 [ ] #PF: supervisor write access in kernel mode [ ] #PF: error_code(0x0002) - not-present page [ ] Oops: Oops: 0002 [#1] SMP NOPTI [ ] Tainted: [W]=WARN [ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe] [ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe] [ ] Call Trace: [ ] <TASK> [ ] xe_ggtt_clear+0xb0/0x270 [xe] [ ] ggtt_node_remove+0xbb/0x120 [xe] [ ] ggtt_node_remove_work_func+0x30/0x50 [xe] [ ] process_one_work+0x22b/0x6f0 [ ] worker_thread+0x1e8/0x3d Add managed-device action that will explicitly drain the workqueue with all pending node removals prior to releasing MMIO/GSM mapping. Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250612220937.857-2-michal.wajdeczko@intel.com (cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-26drm/xe/guc: Explicitly exit CT safe mode on unwindMichal Wajdeczko
During driver probe we might be briefly using CT safe mode, which is based on a delayed work, but usually we are able to stop this once we have IRQ fully operational. However, if we abort the probe quite early then during unwind we might try to destroy the workqueue while there is still a pending delayed work that attempts to restart itself which triggers a WARN. This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] ------------[ cut here ]------------ [ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq [ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710 [ ] RIP: 0010:__queue_work+0x287/0x710 [ ] Call Trace: [ ] delayed_work_timer_fn+0x19/0x30 [ ] call_timer_fn+0xa1/0x2a0 Exit the CT safe mode on unwind to avoid that warning. Fixes: 09b286950f29 ("drm/xe/guc: Allow CTB G2H processing without G2H IRQ") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250612220937.857-3-michal.wajdeczko@intel.com (cherry picked from commit 2ddbb73ec20b98e70a5200cb85deade22ccea2ec) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-26drm/xe: move DPT l2 flush to a more sensible placeMatthew Auld
Only need the flush for DPT host updates here. Normal GGTT updates don't need special flush. Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250606104546.1996818-4-matthew.auld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 35db1da40c8cfd7511dc42f342a133601eb45449) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-26drm/xe: Move DSB l2 flush to a more sensible placeMaarten Lankhorst
Flushing l2 is only needed after all data has been written. Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 0dd2dd0182bc444a62652e89d08c7f0e4fde15ba) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-24drm/xe/hwmon: Fix xe_hwmon_power_max_writeKarthik Poosa
Prevent other bits of mailbox power limit from being overwritten with 0. This issue was due to a missing read and modify of current power limit, before setting a requested mailbox power limit, which is added in this patch. v2: - Improve commit message. (Anshuman) v3: - Rebase. - Rephrase commit message. (Riana) - Add read-modify-write variant of xe_hwmon_pcode_write_power_limit() i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal) - Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits. - Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits writes use xe_hwmon_pcode_rmw_power_limit() only. v4: - Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever applicable. (Riana) Fixes: 25a2aa779fc3 ("drm/xe/hwmon: Add support to manage power limits though mailbox") Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8aa7306631f088881759398972d503757cf0c901) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-24drm/xe/display: Add check for alloc_ordered_workqueue()Haoxiang Li
Add check for the return value of alloc_ordered_workqueue() in xe_display_create() to catch potential exception. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/4ee1b0e5d1626ce1dde2e82af05c2edaed50c3aa.1747397638.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 5b62d63395d5b7d4094e7cd380bccae4b25415cb) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-19drm/xe: Fix early wedge on GuC load failureDaniele Ceraolo Spurio
When the GuC fails to load we declare the device wedged. However, the very first GuC load attempt on GT0 (from xe_gt_init_hwconfig) is done before the GT1 GuC objects are initialized, so things go bad when the wedge code attempts to cleanup GT1. To fix this, check the initialization status in the functions called during wedge. Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Zhanjun Dong <zhanjun.dong@intel.com> Cc: stable@vger.kernel.org # v6.12+: 1e1981b16bb1: drm/xe: Fix taking invalid lock on wedge Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250611214453.1159846-2-daniele.ceraolospurio@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 0b93b7dcd9eb888a6ac7546560877705d4ad61bf) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-19drm/xe: Fix memset on iomemLucas De Marchi
It should rather use xe_map_memset() as the BO is created with XE_BO_FLAG_VRAM_IF_DGFX in xe_guc_pc_init(). Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250612-vmap-vaddr-v1-1-26238ed443eb@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 21cf47d89fba353b2d5915ba4718040c4cb955d3) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-19drm/xe/bmg: Update Wa_16023588340Vinay Belgaumkar
This allows for additional L2 caching modes. Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-2-94ba5dcc1e30@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 6ab42fa03d4c88a0ddf5e56e62794853b198e7bf) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-12drm/xe/lrc: Use a temporary buffer for WA BBLucas De Marchi
In case the BO is in iomem, we can't simply take the vaddr and write to it. Instead, prepare a separate buffer that is later copied into io memory. Right now it's just a few words that could be using xe_map_write32(), but the intention is to grow the WA BB for other uses. Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization") Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://lore.kernel.org/r/20250604-wa-bb-fix-v1-1-0dfc5dafcef0@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit ef48715b2d3df17c060e23b9aa636af3d95652f8) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-09drm/xe/svm: Fix regression disallowing 64K SVM migrationMaarten Lankhorst
When changing the condition from >= SZ_64K, it was changed to <= SZ_64K. This disallows migration of 64K, which is the exact minimum allowed. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5057 Fixes: 794f5493f518 ("drm/xe: Strict migration policy for atomic SVM faults") Cc: stable@vger.kernel.org Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Link: https://lore.kernel.org/r/20250521090102.2965100-1-dev@lankhorst.se (cherry picked from commit 531bef26d189b28bf0d694878c0e064b30990b6c) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-06Merge tag 'drm-next-2025-06-06' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "This is pretty much two weeks worth of fixes, plus one thing that might be considered next: amdkfd is now able to be enabled on risc-v platforms. Otherwise, amdgpu and xe with the majority of fixes, and then a smattering all over. panel: - nt37801: fix IS_ERR - nt37801: fix KConfig connector: - Fix null deref in HDMI audio helper. bridge: - analogix_dp: fixup clk-disable removal nouveau: - minor typo fix (',' vs ';') msm: - mailmap updates i915: - Fix the enabling/disabling of DP audio SDP splitting - Fix PSR register definitions for ALPM - Fix u32 overflow in SNPS PHY HDMI PLL setup - Fix GuC pending message underflow when submit fails - Fix GuC wakeref underflow race during reset xe: - Two documentation fixes - A couple of vm init fixes - Hwmon fixes - Drop reduntant conversion to bool - Fix CONFIG_INTEL_VSEC dependency - Rework eviction rejection of bound external bos - Stop re-submitting signalled jobs - A couple of pxp fixes - Add back a fix that got lost in a merge - Create LRC bo without VM - Fix for the above fix amdgpu: - UserQ fixes - SMU 13.x fixes - VCN fixes - JPEG fixes - Misc cleanups - runtime pm fix - DCN 4.0.1 fixes - Misc display fixes - ISP fix - VRAM manager fix - RAS fixes - IP discovery fix - Cleaner shader fix for GC 10.1.x - OD fix - Non-OLED panel fix - Misc display fixes - Brightness fixes amdkfd: - Enable CONFIG_HSA_AMD on RISCV - SVM fix - Misc cleanups - Ref leak fix - WPTR BO fix radeon: - Misc cleanups" * tag 'drm-next-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel: (105 commits) drm/nouveau/vfn/r535: Convert comma to semicolon drm/xe: remove unmatched xe_vm_unlock() from __xe_exec_queue_init() drm/xe: Create LRC BO without VM drm/xe/guc_submit: add back fix drm/xe/pxp: Clarify PXP queue creation behavior if PXP is not ready drm/xe/pxp: Use the correct define in the set_property_funcs array drm/xe/sched: stop re-submitting signalled jobs drm/xe: Rework eviction rejection of bound external bos drm/xe/vsec: fix CONFIG_INTEL_VSEC dependency drm/xe: drop redundant conversion to bool drm/xe/hwmon: Move card reactive critical power under channel card drm/xe/hwmon: Add support to manage power limits though mailbox drm/xe/vm: move xe_svm_init() earlier drm/xe/vm: move rebind_work init earlier MAINTAINERS: .mailmap: update Rob Clark's email address mailmap: Update entry for Akhil P Oommen MAINTAINERS: update my email address MAINTAINERS: drop myself as maintainer drm/i915/display: Fix u32 overflow in SNPS PHY HDMI PLL setup drm/amd/display: Fix default DC and AC levels ...
2025-06-05drm/xe: remove unmatched xe_vm_unlock() from __xe_exec_queue_init()Maciej Patelczyk
There is unmatched xe_vm_unlock() in the __xe_exec_queue_init(). Leftover from commit fbeaad071a98 ("drm/xe: Create LRC BO without VM") Fixes: 2b0a0ce0c20b ("drm/xe: Create LRC BO without VM") Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Link: https://lore.kernel.org/r/20250530135627.2821612-1-maciej.patelczyk@intel.com (cherry picked from commit 28b996ce73982a44fa86736ca0e3684cb1ae8b24) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe: Create LRC BO without VMNiranjana Vishwanathapura
Specifying VM during lrc->bo creation requires VM's reference to be held for the lifetime of lrc->bo as it will use VM's dma reservation object. Using VM's dma reservation object for lrc->bo doesn't provide any advantage. Hence do not pass VM while creating lrc->bo. v2: Use xe_bo_unpin_map_no_vm (Matthew Brost) Fixes: 264eecdba211 ("drm/xe: Decouple xe_exec_queue and xe_lrc") Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250529052031.2429120-2-niranjana.vishwanathapura@intel.com (cherry picked from commit fbeaad071a98fef87deccee81d564de1c8e8e16d) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe/guc_submit: add back fixMatthew Auld
Daniele noticed that the fix in commit 2d2be279f1ca ("drm/xe: fix UAF around queue destruction") looks to have been unintentionally removed as part of handling a conflict in some past merge commit. Add it back. Fixes: ac44ff7cec33 ("Merge tag 'drm-xe-fixes-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes") Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.12+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250603174213.1543579-2-matthew.auld@intel.com (cherry picked from commit 9d9fca62dc49d96f97045b6d8e7402a95f8cf92a) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe/pxp: Clarify PXP queue creation behavior if PXP is not readyDaniele Ceraolo Spurio
The expected flow of operations when using PXP is to query the PXP status and wait for it to transition to "ready" before attempting to create an exec_queue. This flow is followed by the Mesa driver, but there is no guarantee that an incorrectly coded (or malicious) app will not attempt to create the queue first without querying the status. Therefore, we need to clarify what the expected behavior of the queue creation ioctl is in this scenario. Currently, the ioctl always fails with an -EBUSY code no matter the error, but for consistency it is better to distinguish between "failed to init" (-EIO) and "not ready" (-EBUSY), the same way the query ioctl does. Note that, while this is a change in the return code of an ioctl, the behavior of the ioctl in this particular corner case was not clearly spec'd, so no one should have been relying on it (and we know that Mesa, which is the only known userspace for this, didn't). v2: Minor rework of the doc (Rodrigo) Fixes: 72d479601d67 ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250522225401.3953243-7-daniele.ceraolospurio@intel.com (cherry picked from commit 21784ca96025b62d95b670b7639ad70ddafa69b8) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe/pxp: Use the correct define in the set_property_funcs arrayDaniele Ceraolo Spurio
The define of the extension type was accidentally used instead of the one of the property itself. They're both zero, so no functional issue, but we should use the correct define for code correctness. Fixes: 41a97c4a1294 ("drm/xe/pxp/uapi: Add API to mark a BO as using PXP") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250522225401.3953243-6-daniele.ceraolospurio@intel.com (cherry picked from commit 1d891ee820fd0fbb4101eacb0d922b5050a24933) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe/sched: stop re-submitting signalled jobsMatthew Auld
Customer is reporting a really subtle issue where we get random DMAR faults, hangs and other nasties for kernel migration jobs when stressing stuff like s2idle/s3/s4. The explosions seems to happen somewhere after resuming the system with splats looking something like: PM: suspend exit rfkill: input handler disabled xe 0000:00:02.0: [drm] GT0: Engine reset: engine_class=bcs, logical_mask: 0x2, guc_id=0 xe 0000:00:02.0: [drm] GT0: Timedout job: seqno=24496, lrc_seqno=24496, guc_id=0, flags=0x13 in no process [-1] xe 0000:00:02.0: [drm] GT0: Kernel-submitted job timed out The likely cause appears to be a race between suspend cancelling the worker that processes the free_job()'s, such that we still have pending jobs to be freed after the cancel. Following from this, on resume the pending_list will now contain at least one already complete job, but it looks like we call drm_sched_resubmit_jobs(), which will then call run_job() on everything still on the pending_list. But if the job was already complete, then all the resources tied to the job, like the bb itself, any memory that is being accessed, the iommu mappings etc. might be long gone since those are usually tied to the fence signalling. This scenario can be seen in ftrace when running a slightly modified xe_pm IGT (kernel was only modified to inject artificial latency into free_job to make the race easier to hit): xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ... xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13 xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=1, guc_state=0x0, flags=0x4 xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=0, guc_state=0x0, flags=0x3 xe_exec_queue_stop: dev=0000:00:02.0, 1:0x1, gt=1, width=1, guc_id=1, guc_state=0x0, flags=0x3 xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=2, guc_state=0x0, flags=0x3 xe_exec_queue_resubmit: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13 xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ... ..... xe_exec_queue_memory_cat_error: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x3, flags=0x13 So the job_run() is clearly triggered twice for the same job, even though the first must have already signalled to completion during suspend. We can also see a CAT error after the re-submit. To prevent this only resubmit jobs on the pending_list that have not yet signalled. v2: - Make sure to re-arm the fence callbacks with sched_start(). v3 (Matt B): - Stop using drm_sched_resubmit_jobs(), which appears to be deprecated and just open-code a simple loop such that we skip calling run_job() on anything already signalled. Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4856 Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: William Tseng <william.tseng@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://lore.kernel.org/r/20250528113328.289392-2-matthew.auld@intel.com (cherry picked from commit 38fafa9f392f3110d2de431432d43f4eef99cd1b) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe: Rework eviction rejection of bound external bosThomas Hellström
For preempt_fence mode VM's we're rejecting eviction of shared bos during VM_BIND. However, since we do this in the move() callback, we're getting an eviction failure warning from TTM. The TTM callback intended for these things is eviction_valuable(). However, the latter doesn't pass in the struct ttm_operation_ctx needed to determine whether the caller needs this. Instead, attach the needed information to the vm under the vm->resv, until we've been able to update TTM to provide the needed information. And add sufficient lockdep checks to prevent misuse and races. v2: - Fix a copy-paste error in xe_vm_clear_validating() v3: - Fix kerneldoc errors. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: 0af944f0e308 ("drm/xe: Reject BO eviction if BO is bound to current VM") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250528164105.234718-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 9d5558649f68e2e84a87a909631b30e15ca0f8ec) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe/vsec: fix CONFIG_INTEL_VSEC dependencyArnd Bergmann
The XE driver can be built with or without VSEC support, but fails to link as built-in if vsec is in a loadable module: x86_64-linux-ld: vmlinux.o: in function `xe_vsec_init': (.text+0x1e83e16): undefined reference to `intel_vsec_register' The normal fix for this is to add a 'depends on INTEL_VSEC || !INTEL_VSEC', forcing XE to be a loadable module as well, but that causes a circular dependency: symbol DRM_XE depends on INTEL_VSEC symbol INTEL_VSEC depends on X86_PLATFORM_DEVICES symbol X86_PLATFORM_DEVICES is selected by DRM_XE The problem here is selecting a symbol from another subsystem, so change that as well and rephrase the 'select' into the corresponding dependency. Since X86_PLATFORM_DEVICES is 'default y', there is no change to defconfig builds here. Fixes: 0c45e76fcc62 ("drm/xe/vsec: Support BMG devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250529172355.2395634-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit e4931f8be347ec5f19df4d6d33aea37145378c42) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe: drop redundant conversion to boolRaag Jadav
The result of integer comparison already evaluates to bool. No need for explicit conversion. No functional impact. Fixes: 0e414bf7ad01 ("drm/xe: Expose PCIe link downgrade attributes") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505292205.MoljmkjQ-lkp@intel.com/ Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250529160937.490147-1-raag.jadav@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 61761a6b57f2818983466d24aab60baab471ba21) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-05drm/xe/hwmon: Move card reactive critical power under channel cardKarthik Poosa
Move power2/curr2_crit to channel 1 i.e power1/curr1_crit as this represents the entire card critical power/current. v2: Update the date of curr1_crit also in hwmon documentation. Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Fixes: 345dadc4f68b ("drm/xe/hwmon: Add infra to support card power and energy attributes") Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250529163458.2354509-3-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 25e963a09e059ffdb15c09cc79cfded855b43668) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-07-25 18:49:07 +0000