| Age | Commit message (Collapse) | Author |
|---|
|
ishtp_dev_state_str() was added in 2016 by
commit 3703f53b99e4 ("HID: intel_ish-hid: ISH Transport layer")
but has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Collections
A report in 2019 by the syzbot fuzzer was found to be connected to two
errors in the HID core associated with Resolution Multipliers. One of
the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop
in hid_apply_multiplier."), but the other has not been fixed.
This error arises because hid_apply_multipler() assumes that every
Resolution Multiplier control is contained in a Logical Collection,
i.e., there's no way the routine can ever set multiplier_collection to
NULL. This is in spite of the fact that the function starts with a
big comment saying:
* "The Resolution Multiplier control must be contained in the same
* Logical Collection as the control(s) to which it is to be applied.
...
* If no Logical Collection is
* defined, the Resolution Multiplier is associated with all
* controls in the report."
* HID Usage Table, v1.12, Section 4.3.1, p30
*
* Thus, search from the current collection upwards until we find a
* logical collection...
The comment and the code overlook the possibility that none of the
collections found may be a Logical Collection.
The fix is to set the multiplier_collection pointer to NULL if the
collection found isn't a Logical Collection.
Reported-by: syzbot+ec5f884c4a135aa0dbb9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000109c040597dc5843@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Fixes: 5a4abb36f312 ("HID: core: process the Resolution Multiplier")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac77 ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fn Keys like Mic mute, Power Modes/Airplane mode,Selective
screenshot/Pickup Phone, KBD Backlight and
star/Favourites is emitted as HID raw events in X12 Tab1 and Tab2.
This support has been added.
Thinkpad X12 TAB 2 and TAB 1 Folio keyboard's raw events will get
detected as Fn keys with this patch.
Default fn_lock state for these Keyboards are OFF.
Other than these changes, we follow TP10UKBD's processes.
Tested on X12 Tab 2.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Signed-off-by: Vishnu Sankar <vsankar@lenovo.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This device sometimes doesn't send touch release signals when moving
from >=2 fingers to <2 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
Signed-off-by: Enze Xie <enze@nfschina.com>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The NSO MD/GEN 6B was a Japan-only controller released which has
6 buttons on the face of the controller. This adds support for this
controller. It still enumerates just like the 3B controller, but
will use extra bits in it's report for the 3 extra controllers. This
also changes the events reported to match the letter on the controller
for the NSO MD/GEN controller. The VID/PID it reports is the same as
the 3B controller.
This also removes a comment on the N64 Controllers which didn't
mean anything.
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The wacom driver has (deprecated) sysfs properties `status0_luminance`
and `status1_luminance` that are used to control the low- and high-
level brightness values (llv and hlv) of the status LEDs. These two
properties had an effect on /all/ of the status LEDs.
After our driver switched to exposing each status LED individually
through the LED class, this behavior changed. These controls started
having only a temporary effect on the currently-lit LED. If a trigger
changed the current LED, the driver would switch the brightness back
to the llv/hlv values stored per-LED. (The code's current behavior of
updating the "global" e.g. `wacom->led.llv` values has essentially no
effect because those values are only used at initialization time).
This commit restores the original behavior by ensuring these properties
update the per-LED brightness for all LEDs.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Assigning a non-standard brightness value to an LED can cause the value
to slowly drift downward over time as the effects of integer division
accumulate. Each time that an LED is triggered, a series of set and get
calls occur. For example, if we assume a tablet with max_hlv = 100, then
when brightness is set to "200" through sysfs, the hlv value written to
hardware will be `200*100/255 = 78`. If the LED trigger is later activated,
the hlv value will be used to determine the brightness: `78*255/100 = 198`.
This lower brightness then used to set the brightness of the next LED.
However, `198*100/255 = 77`, so the next LED ends up slightly dimmer.
Each subsequent trigger activation will cause the brightness to continue
drifting down until we reach a point where the result of integer divsion
does not introduce any new error.
This commit corrects the issue by being more careful about how we handle
scaling between the two ranges (0..max_{h,l}lv) and (0..LED_FULL).
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
check
syzbot has found a type mismatch between a USB pipe and the transfer
endpoint, which is triggered by the hid-thrustmaster driver[1].
There is a number of similar, already fixed issues [2].
In this case as in others, implementing check for endpoint type fixes the issue.
[1] https://syzkaller.appspot.com/bug?extid=040e8b3db6a96908d470
[2] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622
Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com
Tested-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Updated the device name for Apple Magic Trackpad USB-C when connected via
Bluetooth.
This change ensures the correct recognition of the 2024 USB-C trackpad and
improves user experience.
Signed-off-by: Qingyan Li <soragoto@soragoto.io>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The hid-sensor-hub creates the individual device structs and transfers them
to the created mfd platform-devices via the platform_data in the mfd_cell.
Before e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads")
the sensor-hub was managing access centrally, with one "completion" in the
hub's data structure, which needed to be finished on removal at the latest.
The mentioned commit then moved this central management to each hid sensor
device, resulting on a completion in each struct hid_sensor_hub_device.
The remove procedure was adapted to go through all sensor devices and
finish any pending "completion".
What this didn't take into account was, platform_device_add_data() that is
used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
platform-data. So the data the platform-device gets is a copy of the
original data, meaning that the device worked on a different completion
than what sensor_hub_remove() currently wants to access.
To fix that, use device_for_each_child() to go through each child-device
similar to how mfd_remove_devices() unregisters the devices later and
with that get the live platform_data to finalize the correct completion.
Fixes: e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit c8000deb68365b ("HID: multitouch: Add support for GT7868Q") added
support for 0x01e8 and 0x01e9, but the mt_device[] entries were added
twice for 0x01e8 and there was none added for 0x01e9. Fix that.
Fixes: c8000deb68365b ("HID: multitouch: Add support for GT7868Q")
Reported-by: He Lugang <helugang@uniontech.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Reported-by: Ulrich Müller <ulm@gentoo.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This reverts commit 251efae73bd46b097deec4f9986d926813aed744.
Quoting Wang Yuli:
"The 27C6:01E0 touchpad doesn't require the workaround and applying it
would actually break functionality.
The initial report came from a BBS forum, but we suspect the
information provided by the forum user may be incorrect which could
happen sometimes. [1]
Further investigation showed that the Lenovo Y9000P 2024 doesn't even
use a Goodix touchpad. [2]
For the broader issue of 27c6:01e0 being unusable on some devices, it
just need to address it with a libinput quirk.
In conclusion, we should revert this commit, which is the best
solution."
Reported-by: Ulrich Müller <ulm@gentoo.org>
Reported-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/all/uikt4wwpw@gentoo.org/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Save some lines of code and prepare for the constification of
'struct bin_attribute'.
Also align the definitions within the source file.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This solves keyboard not working until suspend&resume issue on Dell XPS
9345 13" (codenamed 'tributo').
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
It appears some keyboards from vendor 'QTEC' will not work properly until
suspend & resume.
Empirically narrowed down to solution of re-sending power on command
_after_ initialization was completed before the end of initial probing.
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
If an LED has a default_trigger set prior to being registered with
the subsystem, that trigger will be executed with a brightness value
defined by `trigger->brightness`. Our driver was not setting this
value, which was causing problems. It would cause the selected LED
to be turned off, as well as corrupt the hlv/llv values assigned to
other LEDs (since calling `wacom_led_brightness_set` will overite
these values).
This patch sets the value of `trigger->brightness` to an appropriate
value. We use `wacom_leds_brightness_get` to transform the llv/hlv
values into a brightness that is understood by the rest of the LED
subsystem.
Fixes: 822c91e72eac ("leds: trigger: Store brightness set by led_trigger_event()")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 33c0fb85b571 ("HID: bpf: make part of struct hid_device writable")
the const qualifier was dropped from struct hid_bpf_ctx::hid.
The casts are now unnecessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241127-hid-bpf-cast-v1-1-f26424960e84@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The hid_ops struct is never modified. Mark it as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241127-hid-bpf-ops-v1-1-f9e41bfa3afd@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Due to incorrect dev->product reporting by certain devices, null
pointer dereferences occur when dev->product is empty, leading to
potential system crashes.
This issue was found on EXCELSIOR DL37-D05 device with
Loongson-LS3A6000-7A2000-DL37 motherboard.
Kernel logs:
[ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci
[ 56.671638] usb 4-3: string descriptor 0 read error: -22
[ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07
[ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0
[ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80
[ 56.697732] Oops[#1]:
[ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015
[ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024
[ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0
[ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000
[ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000
[ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005
[ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000
[ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028
[ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000
[ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000
[ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom]
[ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120
[ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE)
[ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
[ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 56.697835] BADV: 0000000000000000
[ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000)
[ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit
[ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3)
[ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000
[ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000
[ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0
[ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c
[ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440
[ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0
[ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c
[ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000
[ 56.697931] 90000001000bb8d0 9000000006307564 9000000005e666e0 90000001752359b8
[ 56.697936] 9000000008cbe400 900000000804d000 9000000005e666e0 0000000000000000
[ 56.697941] ...
[ 56.697944] Call Trace:
[ 56.697945] [<90000000066e35c8>] strstr+0x28/0x120
[ 56.697950] [<ffff800004f98a80>] wacom_update_name+0xe0/0x300 [wacom]
[ 56.698000] [<ffff800004f9ce58>] wacom_parse_and_register+0x338/0x900 [wacom]
[ 56.698050] [<ffff800004f9d74c>] wacom_probe+0x32c/0x420 [wacom]
[ 56.698099] [<9000000006307564>] hid_device_probe+0x144/0x260
[ 56.698103] [<9000000005e65d68>] really_probe+0x208/0x540
[ 56.698109] [<9000000005e661dc>] __driver_probe_device+0x13c/0x1e0
[ 56.698112] [<9000000005e66620>] driver_probe_device+0x40/0x100
[ 56.698116] [<9000000005e6680c>] __device_attach_driver+0x12c/0x180
[ 56.698119] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160
[ 56.698123] [<9000000005e66468>] __device_attach+0x108/0x260
[ 56.698126] [<9000000005e63918>] device_reprobe+0x78/0x100
[ 56.698129] [<9000000005e62a68>] bus_for_each_dev+0x88/0x160
[ 56.698132] [<9000000006304e54>] __hid_bus_driver_added+0x34/0x80
[ 56.698134] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160
[ 56.698137] [<9000000006304df0>] __hid_register_driver+0x70/0xa0
[ 56.698142] [<9000000004e10fe4>] do_one_initcall+0x104/0x320
[ 56.698146] [<9000000004f38150>] do_init_module+0x90/0x2c0
[ 56.698151] [<9000000004f3a3d8>] init_module_from_file+0xb8/0x120
[ 56.698155] [<9000000004f3a590>] idempotent_init_module+0x150/0x3a0
[ 56.698159] [<9000000004f3a890>] sys_finit_module+0xb0/0x140
[ 56.698163] [<900000000671e4e8>] do_syscall+0x88/0xc0
[ 56.698166] [<9000000004e12404>] handle_syscall+0xc4/0x160
[ 56.698171] Code: 0011958f 00150224 5800cd85 <2a00022c> 00150004 4000c180 0015022c 03400000 03400000
[ 56.698192] ---[ end trace 0000000000000000 ]---
Fixes: 09dc28acaec7 ("HID: wacom: Improve generic name generation")
Reported-by: Zhenxing Chen <chenzhenxing@uniontech.com>
Co-developed-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://patch.msgid.link/B31757FE8E1544CF+20241125052616.18261-1-wangyuli@uniontech.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
commit 7d6f065de37c ("HID: i2c-hid: Use address probe to wake on resume")
replaced the retry of power commands with the dummy read "bus probe" we
use on boot which accounts for a necessary delay before retry.
This made at least one Weida device (2575:0910 in an ASUS Vivobook S14)
very unhappy, as the bus probe despite being successful somehow lead to
the following power command failing so hard that the device never lets
go of the bus. This means that even retries of the power command would
fail on a timeout as the bus remains busy.
Remove the bus probe on resume and instead reintroduce retry of the
power command for wake-up purposes while respecting the newly
established wake-up retry timings.
Fixes: 7d6f065de37c ("HID: i2c-hid: Use address probe to wake on resume")
Cc: stable@vger.kernel.org
Reported-by: Michael <auslands-kv@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219440
Link: https://lore.kernel.org/r/d5acb485-7377-4139-826d-4df04d21b5ed@leemhuis.info/
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://patch.msgid.link/20241119235615.23902-1-kl@kl.wtf
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This reverts commit 6fd47effe92b, and the related self-test update
commit e14e0eaeb040 ("selftests/hid: add test for assigning a given
device to hid-generic").
It results in things like the scroll wheel on Logitech mice not working
after a reboot due to the kernel being confused about the state of the
high-resolution mode.
Quoting Benjamin Tissoires:
"The idea of 6fd47effe92b was to be able to call hid_bpf_rdesc_fixup()
once per reprobe of the device.
However, because the bpf filter can now change the quirk value, the
call had to be moved before the driver gets bound (which was
previously ensuring the unicity of the call).
The net effect is that now, in the case hid-generic gets loaded first
and then the specific driver gets loaded once the disk is available,
the value of ->quirks is not reset, but kept to the value that was set
by hid-generic (HID_QUIRK_INPUT_PER_APP).
Once hid-logitech-hidpp kicks in, that quirk is now set, which creates
two inputs for the single mouse: one keyboard for fancy shortcuts, and
one mouse node.
However, hid-logitech-hidpp expects only one input node to be attached
(it stores it into hidpp->input), and when a wheel event is received,
because there is some processing with high-resolution wheel events,
the wheel event is injected into hidpp->input.
And of course, when HID_QUIRK_INPUT_PER_APP is set, hidpp->input gets
the keyboard node, which doesn't have wheel event type, and the events
are ignored"
Reported-and-bisected-by: Mike Galbraith <efault@gmx.de>
Link: https://lore.kernel.org/all/CAHk-=wiUkQM3uheit2cNM0Y0OOY5qqspJgC8LkmOkJ2p2LDxcw@mail.gmail.com/
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Improve handling of LCD power states and interactions with the fbdev
subsystem
- Introduce new LCD_POWER_ constants to decouple the LCD subsystem from
fbdev
- Update several drivers to use the new LCD_POWER_ constants
- Clarify the semantics of the lcd_ops.controls_device callback
- Remove unnecessary includes and dependencies
- Remove unused notifier functionality
- Simplify code with scoped for-each loops
- Fix module autoloading for the ktz8866 driver
- Update device tree bindings to yaml format
- Minor cleanups and improvements in various drivers
* tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits)
MAINTAINERS: Use Daniel Thompson's korg address for Backlight work
dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml
backlight: Remove notifier
backlight: ktz8866: Fix module autoloading
backlight: 88pm860x_bl: Simplify with scoped for each OF child loop
backlight: lcd: Do not include <linux/fb.h> in lcd header
backlight: lcd: Remove struct fb_videomode from set_mode callback
backlight: lcd: Replace check_fb with controls_device
HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: omap: Use lcd power constants
fbdev: imxfb: Use lcd power constants
fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: clps711x-fb: Use lcd power constants
fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
backlight: tdo24m: Use lcd power constants
backlight: platform_lcd: Use lcd power constants
backlight: platform_lcd: Remove match_fb from struct plat_lcd_data
backlight: platform_lcd: Remove include statement for <linux/backlight.h>
backlight: otm3225a: Use lcd power constants
backlight: ltv350qv: Use lcd power constants
...
|
|
- improvement of the way hid-bpf coexists with specific drivers (others than
hid-generic) that are already bound to devices (Benjamin Tissoires)
|
|
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang)
|
|
- assorted cleanups and small code fixes (Dmitry Torokhov, Yan Zhen,
Nathan Chancellor, Andy Shevchenko)
|
|
- support for Corsair Void headset family (Stuart Hayhurst)
|
|
- Support for Goodix GT7986U SPI (Charles Wang)
- assorted code cleanups and fixes (Charles Wang)
|
|
- code cleanup (Uwe Kleine-König)
|
|
- exposing firmware versions for Intel-ISH devices that load
firmware from the host (Zhang Lixu)
- switch to flex-array members (Erick Archer)
|
|
- initial vendor-specific driver for Kysona, currently adding support for
Kysona M600 (Lode Willems)
|
|
- unused variable removal in hidpp_root_get_feature() (Bastien Nocera)
|
|
- code cleanup for mt_set_mode() (Dmitry Torokhov)
|
|
mt_set_mode() accepts 2 boolean switches indicating whether the device
(if it follows Windows Precision Touchpad specification) should report
hardware buttons and/or surface contacts. For a casual reader it is
completely not clear, as they look at the call site, which exact mode
is being requested.
Define report_mode enum and change mt_set_mode() to accept is as
an argument instead. This allows to write:
mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
or
mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_BUTTONS);
which makes intent much more clear.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/Zx_hBvg5Qa3KU3ta@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
- bugfixes for Steelseries Arctis 1 battery level handling (Bastien Nocera)
|
|
- Sanitization of BTN_TOOL_RUBBER handling (Jason Gerecke)
|
|
This patch introduces the following changes:
- Adds OF match table.
- Hardcodes hid-report-addr in the driver rather than fetching it
from the device property.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is.
Fixes: 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources")
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
