summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2025-06-29iio: dac: ad3530r: Fix incorrect masking for channels 4-7 in powerdown modeKim Seer Paller
In the current implementation of ad3530r_set_dac_powerdown() function, the macro AD3530R_OP_MODE_CHAN_MSK(chan->channel) is used to generate the bitmask for the operating mode of a specific channel. However, this macro does not account for channels 4-7, which map to the second register AD3530R_OUTPUT_OPERATING_MODE_1 for the 8 channeled device. As a result, the bitmask is incorrectly calculated for these channels, leading to improper configuration of the powerdown mode. Resolve this issue by adjusting the channel index for channels 4-7 by subtracting 4 before applying the macro. This ensures that the correct bitmask is generated for the second register. Fixes: 93583174a3df ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R") Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250626-bug_fix-v1-1-eb3c2b370f10@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29iio: adc: ad7380: fix adi,gain-milli property parsingDavid Lechner
Change the data type of the "adi,gain-milli" property from u32 to u16. The devicetree binding specifies it as uint16, so we need to read it as such to avoid an -EOVERFLOW error when parsing the property. Fixes: c904e6dcf402 ("iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250619-iio-adc-ad7380-fix-adi-gain-milli-parsing-v1-1-4c27fb426860@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29iio: adc: ad7949: use spi_is_bpw_supported()David Lechner
Use spi_is_bpw_supported() instead of directly accessing spi->controller ->bits_per_word_mask. bits_per_word_mask may be 0, which implies that 8-bits-per-word is supported. spi_is_bpw_supported() takes this into account while spi_ctrl_mask == SPI_BPW_MASK(8) does not. Fixes: 0b2a740b424e ("iio: adc: ad7949: enable use with non 14/16-bit controllers") Closes: https://lore.kernel.org/linux-spi/c8b8a963-6cef-4c9b-bfef-dab2b7bd0b0f@sirena.org.uk/ Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/20250611-iio-adc-ad7949-use-spi_is_bpw_supported-v1-1-c4e15bfd326e@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flushSean Nyekjaer
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with iio_for_each_active_channel()) without making sure the indio_dev stays in buffer mode. There is a race if indio_dev exits buffer mode in the middle of the interrupt that flushes the fifo. Fix this by calling synchronize_irq() to ensure that no interrupt is currently running when disabling buffer mode. Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [...] _find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290 fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178 fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c irq_thread_fn from irq_thread+0x110/0x1f4 irq_thread from kthread+0xe0/0xfc kthread from ret_from_fork+0x14/0x2c Fixes: 79e3a5bdd9ef ("iio: accel: fxls8962af: add hw buffered sampling") Cc: stable@vger.kernel.org Suggested-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29iio: adc: axp20x_adc: Add missing sentinel to AXP717 ADC channel mapsChen-Yu Tsai
The AXP717 ADC channel maps is missing a sentinel entry at the end. This causes a KASAN warning. Add the missing sentinel entry. Fixes: 5ba0cb92584b ("iio: adc: axp20x_adc: add support for AXP717 ADC") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29iio: common: st_sensors: Fix use of uninitialize device structsMaud Spierings
Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1] Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ [1] Cc: stable@vger.kernel.org Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://... [1] Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29iio: adc: adi-axi-adc: fix ad7606_bus_reg_read()David Lechner
Mask the value read before returning it. The value read over the parallel bus via the AXI ADC IP block contains both the address and the data, but callers expect val to only contain the data. axi_adc_raw_write() takes a u32 parameter, so addr was the wrong type. This wasn't causing any issues but is corrected anyway since we are touching the same line to add a new variable. Cc: stable@vger.kernel.org Fixes: 79c47485e438 ("iio: adc: adi-axi-adc: add support for AD7606 register writing") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250530-iio-adc-adi-axi-adc-fix-ad7606_bus_reg_read-v2-1-ad2dfc0694ce@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: max1363: Reorder mode_list[] entriesFabio Estevam
The IIO core issues warnings when a scan mask is a subset of a previous entry in the available_scan_masks array. On a board using a MAX11601, the following warning is observed: max1363 1-0064: available_scan_mask 7 subset of 6. Never used This occurs because the entries in the max11607_mode_list[] array are not ordered correctly. To fix this, reorder the entries so that no scan mask is a subset of an earlier one. While at it, reorder the mode_list[] arrays for other supported chips as well, to prevent similar warnings on different variants. Note fixes tag dropped as these were introduced over many commits a long time back and the side effect until recently was a reduction in sampling rate due to reading too many channels when only a few were desired. Now we have a sanity check that reports this error but that is not where the issue was introduced. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]Fabio Estevam
Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"), booting a board populated with a MAX11601 results in a flood of warnings: max1363 1-0064: available_scan_mask 8 subset of 0. Never used max1363 1-0064: available_scan_mask 9 subset of 0. Never used max1363 1-0064: available_scan_mask 10 subset of 0. Never used max1363 1-0064: available_scan_mask 11 subset of 0. Never used max1363 1-0064: available_scan_mask 12 subset of 0. Never used max1363 1-0064: available_scan_mask 13 subset of 0. Never used ... These warnings are caused by incorrect offsets used for differential channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros. The max1363_mode_table[] defines the differential channel mappings as follows: MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12), MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13), MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14), MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15), MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16), MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17), MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18), MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19), MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20), MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21), MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22), MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23), Update the macros to follow this same pattern, ensuring that the scan masks are valid and preventing the warnings. Cc: stable@vger.kernel.org Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20250516173900.677821-1-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: stm32-adc: Fix race in installing chained IRQ handlerChen Ni
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250515083101.3811350-1-nichen@iscas.ac.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: fix potential out-of-bound writeMarkus Burri
The buffer is set to 20 characters. If a caller write more characters, count is truncated to the max available space in "simple_write_to_buffer". To protect from OoB access, check that the input size fit into buffer and add a zero terminator after copy to the end of the copied data. Fixes: 6d5dd486c715 iio: core: make use of simple_write_to_buffer() Signed-off-by: Markus Burri <markus.burri@mt.com> Link: https://patch.msgid.link/20250508130612.82270-4-markus.burri@mt.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: backend: fix out-of-bound writeMarkus Burri
The buffer is set to 80 character. If a caller write more characters, count is truncated to the max available space in "simple_write_to_buffer". But afterwards a string terminator is written to the buffer at offset count without boundary check. The zero termination is written OUT-OF-BOUND. Add a check that the given buffer is smaller then the buffer to prevent. Fixes: 035b4989211d ("iio: backend: make sure to NULL terminate stack buffer") Signed-off-by: Markus Burri <markus.burri@mt.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250508130612.82270-2-markus.burri@mt.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-06Merge tag 'char-misc-6.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / iio driver updates from Greg KH: "Here is the big char/misc/iio and other small driver subsystem pull request for 6.16-rc1. Overall, a lot of individual changes, but nothing major, just the normal constant forward progress of new device support and cleanups to existing subsystems. Highlights in here are: - Large IIO driver updates and additions and device tree changes - Android binder bugfixes and logfile fixes - mhi driver updates - comedi driver updates - counter driver updates and additions - coresight driver updates and additions - echo driver removal as there are no in-kernel users of it - nvmem driver updates - spmi driver updates - new amd-sbi driver "subsystem" and drivers added - rust miscdriver binding documentation fix - other small driver fixes and updates (uio, w1, acrn, hpet, xillybus, cardreader drivers, fastrpc and others) All of these have been in linux-next for quite a while with no reported problems" * tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits) binder: fix yet another UAF in binder_devices counter: microchip-tcb-capture: Add watch validation support dt-bindings: iio: adc: Add ROHM BD79100G iio: adc: add support for Nuvoton NCT7201 dt-bindings: iio: adc: add NCT7201 ADCs iio: chemical: Add driver for SEN0322 dt-bindings: trivial-devices: Document SEN0322 iio: adc: ad7768-1: reorganize driver headers iio: bmp280: zero-init buffer iio: ssp_sensors: optimalize -> optimize HID: sensor-hub: Fix typo and improve documentation iio: admv1013: replace redundant ternary operator with just len iio: chemical: mhz19b: Fix error code in probe() iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros iio: make IIO_DMA_MINALIGN minimum of 8 bytes ...
2025-05-31Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "hung_task: extend blocking task stacktrace dump to semaphore" from Lance Yang enhances the hung task detector. The detector presently dumps the blocking tasks's stack when it is blocked on a mutex. Lance's series extends this to semaphores - "nilfs2: improve sanity checks in dirty state propagation" from Wentao Liang addresses a couple of minor flaws in nilfs2 - "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn fixes a couple of issues in the gdb scripts - "Support kdump with LUKS encryption by reusing LUKS volume keys" from Coiby Xu addresses a usability problem with kdump. When the dump device is LUKS-encrypted, the kdump kernel may not have the keys to the encrypted filesystem. A full writeup of this is in the series [0/N] cover letter - "sysfs: add counters for lockups and stalls" from Max Kellermann adds /sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count - "fork: Page operation cleanups in the fork code" from Pasha Tatashin implements a number of code cleanups in fork.c - "scripts/gdb/symbols: determine KASLR offset on s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in the gdb scripts * tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits) llist: make llist_add_batch() a static inline delayacct: remove redundant code and adjust indentation squashfs: add optional full compressed block caching crash_dump, nvme: select CONFIGFS_FS as built-in scripts/gdb/symbols: determine KASLR offset on s390 during early boot scripts/gdb/symbols: factor out pagination_off() scripts/gdb/symbols: factor out get_vmlinux() kernel/panic.c: format kernel-doc comments mailmap: update and consolidate Casey Connolly's name and email nilfs2: remove wbc->for_reclaim handling fork: define a local GFP_VMAP_STACK fork: check charging success before zeroing stack fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code fork: clean-up ifdef logic around stack allocation kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count x86/crash: make the page that stores the dm crypt keys inaccessible x86/crash: pass dm crypt keys to kdump kernel Revert "x86/mm: Remove unused __set_memory_prot()" crash_dump: retrieve dm crypt keys in kdump kernel ...
2025-05-27Merge tag 'irq-cleanups-2025-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq cleanups from Thomas Gleixner: "A set of cleanups for the generic interrupt subsystem: - Consolidate on one set of functions for the interrupt domain code to get rid of pointlessly duplicated code with only marginal different semantics. - Update the documentation accordingly and consolidate the coding style of the irqdomain header" * tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) irqdomain: Consolidate coding style irqdomain: Fix kernel-doc and add it to Documentation Documentation: irqdomain: Update it Documentation: irq-domain.rst: Simple improvements Documentation: irq/concepts: Minor improvements Documentation: irq/concepts: Add commas and reflow irqdomain: Improve kernel-docs of functions irqdomain: Make struct irq_domain_info variables const irqdomain: Use irq_domain_instantiate()'s return value as initializers irqdomain: Drop irq_linear_revmap() pinctrl: keembay: Switch to irq_find_mapping() irqchip/armada-370-xp: Switch to irq_find_mapping() gpu: ipu-v3: Switch to irq_find_mapping() gpio: idt3243x: Switch to irq_find_mapping() sh: Switch to irq_find_mapping() powerpc: Switch to irq_find_mapping() irqdomain: Drop irq_domain_add_*() functions powerpc: Switch irq_domain_add_nomap() to use fwnode thermal: Switch to irq_domain_create_linear() soc: Switch to irq_domain_create_*() ...
2025-05-22Merge tag 'iio-for-6.16a-take2' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: New device support, features and cleanup for 6.16 - take 2 Note - last minute rebase was to drop a typo patch that I'd accidentally picked up (in the microblaze arch Kconfig) Take 2 is due to that rebase messing up some fixes tags that were referring to patches after that point. There is a known merge conflict due to changes in neighbouring lines. Stephen's resolution in linux-next is: https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/ Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those who have been doing much of this work for some time. Lars-Peter is removed from the entry having moved on to other topics. Thanks Nuno, David and Andy for stepping up and Lars-Peter for all your hard work in the past! Includes the usual mix of new device support, features and general cleanup. This time we also have some tree wide changes. - Rip out the iio_device_claim_direct_scoped() as it proved hard to work with. This series includes quite a few related cleanups such as use of guard or factoring code out to allow direct returns. - Switch from iio_device_claim/release_direct_mode() to new iio_device_claim/release_direct() which is structured so that sparse can warn on failed releases. There were a few false positives but those were mostly in code that benefited from being cleaned up as part of this process. - Introduce iio_push_to_buffers_with_ts() to replace the _timestamp() version over time. This version takes the size of the supplied buffer which the core checks is at least as big as expected by calculation from channel descriptions of those channels enabled. Use this in an initial set of drivers. - Add macros for IIO_DECLARE_BUFFER_WITH_TS() and IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure correctly aligned buffers for timestamps being added onto the end of channel data. New device support ------------------ adi,ad3530r - New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with programmable gain controls. R variants have internal references. adi,ad7476 - Add support (dt compatible only) for the Rohm BU79100G ADC which is fully compatible with the ti,ads7866. adi,ad7606 - Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic channel information allocation. adi,ad7380 - Add support for the AD7389-4 dfrobot,sen0322 - New driver for this oxygen sensor. mediatek,mt2701-auxadc - Add binding for MT6893 which is fully compatible with already supported MT8173. meson-saradc - Support the GXLX SoCs. Mostly this is a workaround for some unrelated clock control bits found in the ADC register map. nuvoton,nct7201 - New driver for NCT7201 and NCT7202 I2C ADCs. rohm,bd79124 - New driver for this 12-bit, 8-channel SAR ADC. - Switch to new set_rv etc gpio callbacks that were added in 6.15. rohm,bd79703 - Add support for BD79700, BD79701 and BD79702 DACs that have subsets of functionality of the already supported bd79703. Included making this driver suitable for support device variants. st,stm32-lptimer - Add support for stm32pm25 to this trigger. Features -------- Beyond IIO - Property iterator for named children. core - Enable writes for 64 bit integers used for standard IIO ABI elements. Previously these could be read only. - Helper library that should avoid code duplication for simpler ADC bindings that have a child node per channel. - Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true and simplifies code on all significant architectures) core/backend - Add support to control source of data - useful when the HDL includes things like generated ramps for testing purposes. Enable this for adi-axi-dac adi,ad3552-hs - Add debugfs related callbacks to allow debug access to register contents. adi,ad4000 - Support SPI offload with appropriate FPGA firmware along with improving documentation. adi,ad7293 - Add support for external reference voltage. adi,ad7606 - Support SPI offload. adi,ad7768-1 - Support reset GPIO. adi,admv8818 - Support filter frequencies beyond 2^32. adi,adxl345 - Add single and double tap events. hid-sensor-prox - Support 16-bit report sizes as seen on some Intel platforms. invensense,icm42600 - Enable use of named interrupts to avoid problems with some wiring choices. Get the interrupt by name, but fallback to previous assumption on the first being INT1 if no names are supplied. microchip,mcp3911 - Add reset gpio support. rohm,bh7150 - Add reset gpio support. st,stm32 - Add support to control oversampling. ti,adc128s052 - Add support for ROHM BD79104 which is early compatible with the TI parts already supported by this driver. Includes some general driver cleanup and a separate dt binding. - Simplify reference voltage handling by assuming it is fixed after enabling the supply. winsen,mhz19b - New driver for this C02 sensor. Cleanup and minor fixes ----------------------- dt-bindings - Correct indentation and style for DTS examples. - Use unevalutateProperties for SPI devices instead of additionalProperties to allow generic SPI properties from spi-peripheral-props.yaml ABI Docs - Add missing docs for sampling_frequency when it applies only to events. Treewide - Various minor tweaks, comment fixes and similar. - Sort TI ADCs in Kconfig that had gotten out of order. - Switch various drives that provide GPIO chip functionality to the new callbacks with return values. - Standardize on { } formatting for all array sentinels. - Make use of aligned_s64 in a few places to replace either wrong types or manually defined equivalents. - Drop places where spi bits_per_word is set to 8 because that is the default anyway. adi,ad_sigma_delta library - Avoid a potential use of uninitialized data if reg_size has a value that is not supported (no drivers hit this but it is reasonable hardening) adi,ad4030 - Add error checking for scan types and no longer store it in state. - Rework code to reduce duplication. - Move setting the mode from buffer preenable() to update_scan_mode(), better matching expected semantics of the two different callbacks. - Improve data marshalling comments. adi,ad4695 - Use u16 for buffer elements as oversampling is not yet supported except with SPI offload (which doesn't use this path). adi,ad5592r - Clean up destruction of mutexes. - Use lock guards to simplify code (later patch fixes a missed unlock) adi,ad5933 - Correct some incorrect settling times. adi,ad7091 - Deduplicate handling of writable vs volatile registers as they are the inverse of each other for this device. adi,ad7124 - Fix 3db Filter frequency. - Remove ability to directly write the filter frequency (which was broken) - Register naming improvements. adi,ad7606 - Add a missing return value check. - Fill in max sampling rates for all chips. - Use devm_mutex_init() - Fix up some kernel-doc formatting issues. - Remove some camel case that snuck in. - Drop setting address field in channels as easily established from other fields. - Drop unnecessary parameter to ad76060_scale_setup_cb_t. adi,ad7768-1 - Convert to regmap. - Factor out buffer allocation. - Tidy up headers. adi,ad7944 - Stop setting bits_per_word in SPI xfers with no data. adi,ad9832 - Add of_device_id table rather than just relying on fallbacks. - Use FIELD_PREP() to set values of fields. adi,admv1013 - Cleanup a pointless ternary. adi,admv8818 - Fix up LPF Band 5 frequency which was slightly wrong. - Fix an integer overflow. - Fix range calculation adi,adt7316 - Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler irq_get_trigger_type() adi,adxl345 - Use regmap cache instead of various state variables that were there to reduce bus accesses. - Make regmap return value checking consistent across all call sites. adi,axi-dac - Add a check on number of channels (0 to 15 valid) allwinner,sun20i - Use new adc-helpers to replace local parsing code for channel nodes. bosch,bmp290 - Move to local variables for sensor data marshalling removing the need for a messy definition that has to work for all supported parts. Follow up fix adds a missing initialization. dynaimage,al3010 and dynaimage,al3320a - Various minor cleanup to bring these drivers inline with reviewed feedback given on a new driver. - Fix an error path in which power down is not called when it should be. - Switch to regmap. google,cros_ec - Fix up a flexible array in middle of structure warning. - Flush fifo when changing the timeout to avoid potential long wait for samples. hid-sensor-rotation - Remove an __aligned(16) marking that doesn't seem to be justified. kionix,kxcjk-1013 - Deduplicate code for setting up interrupts. microchip,mcp3911 - Fix handling of conversion results register which differs across supported devices. idt,zopt2201 - Avoid duplicating register lists as all volatile registers are the inverse of writeable registers on this device. renesas,rzg2l - Use new adc-helpers to replace local parsing code for channel nodes. ti,ads1298 - Fix a missing Kconfig dependency. * tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits) dt-bindings: iio: adc: Add ROHM BD79100G iio: adc: add support for Nuvoton NCT7201 dt-bindings: iio: adc: add NCT7201 ADCs iio: chemical: Add driver for SEN0322 dt-bindings: trivial-devices: Document SEN0322 iio: adc: ad7768-1: reorganize driver headers iio: bmp280: zero-init buffer iio: ssp_sensors: optimalize -> optimize HID: sensor-hub: Fix typo and improve documentation iio: admv1013: replace redundant ternary operator with just len iio: chemical: mhz19b: Fix error code in probe() iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros iio: make IIO_DMA_MINALIGN minimum of 8 bytes iio: pressure: zpa2326_spi: remove bits_per_word = 8 iio: pressure: ms5611_spi: remove bits_per_word = 8 ...
2025-05-21mailmap: update and consolidate Casey Connolly's name and emailCasey Connolly
I've used several email addresses and a previous name to contribute. Consolidate all of these to my primary email and update my name. Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org Signed-off-by: Casey Connolly <casey.connolly@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21iio: adc: add support for Nuvoton NCT7201Eason Yang
Add Nuvoton NCT7201/NCT7202 system voltage monitor 12-bit ADC driver NCT7201/NCT7202 supports up to 12 analog voltage monitor inputs and up to 4 SMBus addresses by ADDR pin. Meanwhile, ALERT# hardware event pins for independent alarm signals, and all the threshold values could be set for system protection without any timing delay. It also supports reset input RSTIN# to recover system from a fault condition. Currently, only single-edge mode conversion and threshold events are supported. Signed-off-by: Eason Yang <j2anfernee@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250512083156.3300006-3-j2anfernee@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: chemical: Add driver for SEN0322Tóth János
Add support for the DFRobot SEN0322 oxygen sensor. To instantiate (assuming device is connected to I2C-2): echo 'sen0322 0x73' > /sys/class/i2c-dev/i2c-2/device/new_device To get the oxygen concentration (assuming device is iio:device0) multiply the values read from: /sys/bus/iio/devices/iio:device0/in_concentration_raw /sys/bus/iio/devices/iio:device0/in_concentration_scale Datasheet: https://wiki.dfrobot.com/Gravity_I2C_Oxygen_Sensor_SKU_SEN0322 Signed-off-by: Tóth János <gomba007@gmail.com> Link: https://patch.msgid.link/20250506-iio-chemical-sen0322-v4-2-1465ac8dc190@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ad7768-1: reorganize driver headersJonathan Santos
Remove kernel.h since it adds a lot of unnecessary dependencies. Add specific headers to ensure all functions and macros used in the driver are directly declared. Suggested-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/1f7677d31a0165cb30d7eb3b4d613e1337937f9a.1746662899.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: bmp280: zero-init bufferDavid Lechner
Zero-initialize the buffer used with iio_push_to_buffers_with_ts(). The struct used for the buffer has holes in it, so we need to make sure that the holes are zeroed out rather than containing uninitialized data from the stack. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-iio/aBoBR5D1UMjsSUfZ@stanley.mountain/ Fixes: 872c8014e05e ("iio: pressure: bmp280: drop sensor_data array") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250506-iio-pressure-bmp280-zero-init-buffer-v1-1-0935c31558ac@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: ssp_sensors: optimalize -> optimizeAhelenia Ziemiańska
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Link: https://patch.msgid.link/5a64aa3034c6127d7587de9b7045a12892c01ee5.1746558529.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: admv1013: replace redundant ternary operator with just lenColin Ian King
The variable ret is being assigned a return value and non-zero error return paths are taken at all stages. At the end of the function ret is always zero, so the ternary operator checking for zero ret is redundant and can be replaced with just len instead. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250507134502.254736-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: chemical: mhz19b: Fix error code in probe()Dan Carpenter
Return -ENOMEM if devm_iio_device_alloc() fails. Don't return success. Fixes: 4572a70b3681 ("iio: chemical: Add support for Winsen MHZ19B CO2 sensor") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Acked-by: Gyeyoung Baek <gye976@gmail.com> Link: https://patch.msgid.link/aBtZFLFlr0slcYSi@stanley.mountain Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TSDavid Lechner
Use IIO_DECLARE_BUFFER_WITH_TS() to declare the buffer that gets used with iio_push_to_buffers_with_ts(). This makes the code a bit easier to read and understand. Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-7-4aee1b9f1b89@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TSDavid Lechner
Use IIO_DECLARE_BUFFER_WITH_TS() to declare the buffer that gets used with iio_push_to_buffers_with_ts(). This makes the code a bit easier to read and understand. Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-6-4aee1b9f1b89@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TSDavid Lechner
Use IIO_DECLARE_DMA_BUFFER_WITH_TS() to declare the buffer that gets used with iio_push_to_buffers_with_ts(). This makes the code a bit easier to read and understand. Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-5-4aee1b9f1b89@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELSDavid Lechner
Rename AD4695_MAX_CHANNELS to AD4695_MAX_VIN_CHANNELS. It has been a point of confusion that this macro is only the voltage input channels and not all channels. Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-4-4aee1b9f1b89@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TSDavid Lechner
Use IIO_DECLARE_DMA_BUFFER_WITH_TS() to declare the buffer that gets used with iio_push_to_buffers_with_ts(). This makes the code a bit easier to read and understand. Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-3-4aee1b9f1b89@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: pressure: zpa2326_spi: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the zpa2326 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-14-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: pressure: ms5611_spi: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the ms5611 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-13-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: pressure: bmp280-spi: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the bmp280 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Since no other SPI settings are changed, we can also remove the call to spi_setup(). Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-12-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: magnetometer: rm3100-spi: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the rm3100 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-11-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: magnetometer: hmc5843_spi: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the hmc5843 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-10-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: imu: adis: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the adis driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-9-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: gyro: adxrs450: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the adxrs450 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-8-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: dac: ltc2688: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the ltc2688 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-7-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: dac: ad5791: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the ad5791 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-6-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: dac: ad5766: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the ad5766 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-5-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: dac: ad5761: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the ad5761 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-4-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: chemical: bme680_spi: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the bme680 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Since no other SPI settings are changed, we can also remove the call to spi_setup(). Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-3-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ti-tsc2046: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the ti-tsc2046 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-2-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ad4030: remove bits_per_word = 8David Lechner
Remove setting bits_per_word = 8 from the ad4030 driver. This is the default value for SPI transfers, so it is not necessary to explicitly set it. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-1-341f85fcfe11@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ti-ads1298: Kconfig: add kfifo dependency to fix module buildArthur-Prince
Add dependency to Kconfig’s ti-ads1298 because compiling it as a module failed with an undefined kfifo symbol. Fixes: 00ef7708fa60 ("iio: adc: ti-ads1298: Add driver") Signed-off-by: Arthur-Prince <r2.arthur.prince@gmail.com> Co-developed-by: Mariana Valério <mariana.valerio2@hotmail.com> Signed-off-by: Mariana Valério <mariana.valerio2@hotmail.com> Link: https://patch.msgid.link/20250430191131.120831-1-r2.arthur.prince@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: ti-adc128s052: Drop variable vrefMatti Vaittinen
According to Jonathan, variable reference voltages are very rare. It is unlikely it is needed, and supporting it makes the code a bit more complex. Simplify the driver and drop the variable vref support. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/59106e24332743a7f9eb0b13ad6a2f5595ab485a.1745823530.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ad4000: Avoid potential double data word readMarcelo Schmitt
Currently, SPI-Engine offload module always sends 32-bit data elements to DMA engine. Appropriately, when set for SPI offloading, the IIO driver uses 32 storagebits for IIO ADC channel buffer elements. However, setting SPI transfer length according to storagebits (32-bits in case of offload) can lead to unnecessarily long transfers for ADCs that are 16-bit or less precision. Adjust AD4000 single-shot read to run transfers of 2 bytes when that is enough to get all ADC data bits. Fixes: 59b51edf717b ("iio: adc: ad4000: Add support for SPI offload") Suggested-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/8f765cfd6e93fad4e755dd95d709b7bea2a388e2.1744718916.git.marcelo.schmitt@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: mcp3911: add reset managementMarcus Folkesson
Add support for optional HW reset. If specified, a reset will be asserted during driver probe. Co-developed-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250428-mcp3911-fixes-v2-3-406e39330c3d@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: mcp3911: fix device dependent mappings for conversion result registersMarcus Folkesson
The conversion result registers differs between devices. Make sure the mapping is correct by using a device dependent .get_raw() callback function. Fixes: 732ad34260d3 ("iio: adc: mcp3911: add support for the whole MCP39xx family") Co-developed-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250428-mcp3911-fixes-v2-1-406e39330c3d@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: adc: ad4695: use u16 for buffer elementsDavid Lechner
Change the type of the buffer elements to u16 since we currently only support 16-bit word size. The code was originally written to also allow for 32-bit word size when oversampling is enabled, but so far, oversampling is only implemented when using SPI offload and therefore doesn't use this buffer. AD4695_MAX_CHANNEL_SIZE macro is dropped since it no longer adds any value. AD4695_MAX_CHANNELS + 2 is changed to AD4695_MAX_CHANNELS + 1 because previously we were overallocating. AD4695_MAX_CHANNELS is the number of of voltage channels and + 1 is for the temperature channel. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com> Link: https://patch.msgid.link/20250428-iio-introduce-iio_declare_buffer_with_ts-v4-2-6f7f6126f1cb@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-07-26 05:15:59 +0000