| Age | Commit message (Collapse) | Author |
|---|
|
Major linux distibutions have phased out support for 32-bit machines. Since
rxe is primarily used for development and testing, the benefit of
maintaining 32-bit support is minimal. This change simplifies ATOMIC WRITE
implementations and improves maintainability of the driver.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://patch.msgid.link/20250421025101.3588139-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Now that the crc32_le() library function takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32_le(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250207032316.53941-1-ebiggers@kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When RDMA_RXE is enabled and CRYPTO is disabled, Kbuild gives the
following warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- RDMA_RXE [=y] && (INFINIBAND_USER_ACCESS [=y] || !INFINIBAND_USER_ACCESS [=y]) && INET [=y] && PCI [=y] && INFINIBAND [=y] && INFINIBAND_VIRT_DMA [=y]
This is because RDMA_RXE selects CRYPTO_CRC32, without depending on or
selecting CRYPTO, despite that config option being subordinate to CRYPTO.
Fixes: cee2688e3cd6 ("IB/rxe: Offload CRC calculation when possible")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/21525878.NYvzQUHefP@ubuntu-mate-laptop
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
dma_virt_ops requires that all pages have a kernel virtual address.
Introduce a INFINIBAND_VIRT_DMA Kconfig symbol that depends on !HIGHMEM
and make all three drivers depend on the new symbol.
Also remove the ARCH_DMA_ADDR_T_64BIT dependency, which has been obsolete
since commit 4965a68780c5 ("arch: define the ARCH_DMA_ADDR_T_64BIT config
symbol in lib/Kconfig")
Fixes: 551199aca1c3 ("lib/dma-virt: Add dma_virt_ops")
Link: https://lore.kernel.org/r/20201106181941.1878556-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a
pointer, which is expressed as a dependency on !64BIT ||
ARCH_DMA_ADDR_T_64BIT.
For parisc64 this is not true, and if these IB modules are enabled,
kconfig warns:
WARNING: unmet direct dependencies detected for DMA_VIRT_OPS
Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT)
Selected by [m]:
- INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y]
- RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m]
Add dependencies to fix this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
NET_UDP_TUNNEL is not user selectable, so it should be used as a select
in kconfig.
CRYPTO_CRC32 is a required library for RDMA_RXE so it should active
automatically, as most other CRYPTO_ users do.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Use CPU ability to perform CRC calculations, by
replacing direct calls to crc32_le() with crypto_shash_updata().
The overall performance gain measured with ib_send_bw tool is 10% and it
was tested on "Intel CPU ES-2660 v2 @ 2.20Ghz" CPU.
ib_send_bw -d rxe0 -x 1 -n 9000 -e -s $((1024 * 1024 )) -l 100
---------------------------------------------------------------------------------------------
| | bytes | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] |
---------------------------------------------------------------------------------------------
| crc32_le | 1048576 | 9000 | inf | 497.60 | 0.000498 |
| CRC offload | 1048576 | 9000 | inf | 546.70 | 0.000547 |
---------------------------------------------------------------------------------------------
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
All Soft-RoCE (rxe) is handled now in rdma-core user space library,
so the documentation. The patch below updates the documentation
link to that new location.
Reported-by: Josh Beavers <josh.beavers@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Make the rxe and rdmavt drivers use dma_virt_ops. Update the
comments that refer to the source files removed by this patch.
Remove struct ib_dma_mapping_ops. Remove ib_device.dma_ops.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Andrew Boyer <andrew.boyer@dell.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Soft RoCE (RXE) - The software RoCE driver
ib_rxe implements the RDMA transport and registers to the RDMA core
device as a kernel verbs provider. It also implements the packet IO
layer. On the other hand ib_rxe registers to the Linux netdev stack
as a udp encapsulating protocol, in that case RDMA, for sending and
receiving packets over any Ethernet device. This yields a RDMA
transport over the UDP/Ethernet network layer forming a RoCEv2
compatible device.
The configuration procedure of the Soft RoCE drivers requires
binding to any existing Ethernet network device. This is done with
/sys interface.
A userspace Soft RoCE library (librxe) provides user applications
the ability to run with Soft RoCE devices. The use of rxe verbs ins
user space requires the inclusion of librxe as a device specifics
plug-in to libibverbs. librxe is packaged separately.
Architecture:
+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
+---------------------------------------------------------------+
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Soft RoCE resources:
[1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in
Github
[2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE
Wiki page
[3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
