summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/engleder
AgeCommit message (Collapse)Author
2025-05-15tsnep: fix timestamping with a stacked DSA driverGerhard Engleder
This driver is susceptible to a form of the bug explained in commit c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver") and in Documentation/networking/timestamping.rst section "Other caveats for MAC drivers", specifically it timestamps any skb which has SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled in adapter->hwtstamp_config.tx_type. Evaluate the proper TX timestamping condition only once on the TX path (in tsnep_xmit_frame_ring()) and store the result in an additional TX entry flag. Evaluate the new TX entry flag in the TX confirmation path (in tsnep_tx_poll()). This way SKBTX_IN_PROGRESS is set by the driver as required, but never evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set by a stacked DSA driver and evaluating it would lead to unwanted timestamps. Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-20tsnep: Select speed for loopbackGerhard Engleder
Use 100 Mbps only if the PHY is configured to this speed. Otherwise use always the maximum speed of 1000 Mbps. Also remove explicit setting of carrier on and link mode after loopback. This is not needed anymore, because phy_loopback() with selected speed signals the link and the speed to the MAC. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250312203010.47429-6-gerhard@engleder-embedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-20net: phy: Support speed selection for PHY loopbackGerhard Engleder
phy_loopback() leaves it to the PHY driver to select the speed of the loopback mode. Thus, the speed of the loopback mode depends on the PHY driver in use. Add support for speed selection to phy_loopback() to enable loopback with defined speeds. Ensure that link up is signaled if speed changes as speed is not allowed to change during link up. Link down and up is necessary for a new speed. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-26net: skb: free up one bit in tx_flagsWillem de Bruijn
The linked series wants to add skb tx completion timestamps. That needs a bit in skb_shared_info.tx_flags, but all are in use. A per-skb bit is only needed for features that are configured on a per packet basis. Per socket features can be read from sk->sk_tsflags. Per packet tsflags can be set in sendmsg using cmsg, but only those in SOF_TIMESTAMPING_TX_RECORD_MASK. Per packet tsflags can also be set without cmsg by sandwiching a send inbetween two setsockopts: val |= SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); write(fd, buf, sz); val &= ~SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); Changing a datapath test from skb_shinfo(skb)->tx_flags to skb->sk->sk_tsflags can change behavior in that case, as the tx_flags is written before the second setsockopt updates sk_tsflags. Therefore, only bits can be reclaimed that cannot be set by cmsg and are also highly unlikely to be used to target individual packets otherwise. Free up the bit currently used for SKBTX_HW_TSTAMP_USE_CYCLES. This selects between clock and free running counter source for HW TX timestamps. It is probable that all packets of the same socket will always use the same source. Link: https://lore.kernel.org/netdev/cover.1739988644.git.pav@iki.fi/ Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20250225023416.2088705-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14tsnep: Link queues to NAPIsGerhard Engleder
Use netif_queue_set_napi() to link queues to NAPI instances so that they can be queried with netlink. $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump queue-get --json='{"ifindex": 11}' [{'id': 0, 'ifindex': 11, 'napi-id': 9, 'type': 'rx'}, {'id': 1, 'ifindex': 11, 'napi-id': 10, 'type': 'rx'}, {'id': 0, 'ifindex': 11, 'napi-id': 9, 'type': 'tx'}, {'id': 1, 'ifindex': 11, 'napi-id': 10, 'type': 'tx'}] Additionally use netif_napi_set_irq() to also provide NAPI interrupt number to userspace. $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --do napi-get --json='{"id": 9}' {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 9, 'ifindex': 11, 'irq': 42, 'irq-suspend-timeout': 0} Providing information about queues to userspace makes sense as APIs like XSK provide queue specific access. Also XSK busy polling relies on queues linked to NAPIs. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20250110223939.37490-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: ethernet: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03tsnep: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20240901112803.212753-6-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-08xsk: use generic DMA sync shortcut instead of a custom oneAlexander Lobakin
XSk infra's been using its own DMA sync shortcut to try avoiding redundant function calls. Now that there is a generic one, remove the custom implementation and rely on the generic helpers. xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore, remove it. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07tsnep: Use devm_platform_get_and_ioremap_resource() in tsnep_probe()Markus Elfring
A wrapper function is available since the commit 890cc39a879906b63912482dfc41944579df2dc6 ("drivers: provide devm_platform_get_and_ioremap_resource()"). Thus reuse existing functionality instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Tested-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/29e9dc0f-5597-4fee-be5c-25a5ab4fe2dc@web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-05tsnep: Add helper for RX XDP_RING_NEED_WAKEUP flagGerhard Engleder
Similar chunk of code is used in tsnep_rx_poll_zc() and tsnep_rx_reopen_xsk() to maintain the RX XDP_RING_NEED_WAKEUP flag. Consolidate the code to common helper function. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-03tsnep: Fix mapping for zero copy XDP_TX actionGerhard Engleder
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is done by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. tsnep_xdp_xmit_back() is not prepared for that and uses always the page pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings and the transmission of undefined data. Improve tsnep_xdp_xmit_back() to use the generic buffer type TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX. Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-25tsnep: Add link down PHY loopback supportGerhard Engleder
PHY loopback turns off link state change signalling. Therefore, the loopback only works if the link is already up before the PHY loopback is activated. Ensure that PHY loopback works even if the link is not already up during activation by calling netif_carrier_on() explicitly. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20240123200151.60848-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ringGerhard Engleder
The fill ring of the XDP socket may contain not enough buffers to completey fill the RX queue during socket creation. In this case the flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX queue is not completely filled during polling. Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled during XDP socket creation. Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25tsnep: Remove FCS for XDP data pathGerhard Engleder
The RX data buffer includes the FCS. The FCS is already stripped for the normal data path. But for the XDP data path the FCS is included and acts like additional/useless data. Remove the FCS from the RX data buffer also for XDP. Fixes: 65b28c810035 ("tsnep: Add XDP RX support") Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-24tsnep: Fix tsnep_request_irq() format-overflow warningGerhard Engleder
Compiler warns about a possible format-overflow in tsnep_request_irq(): drivers/net/ethernet/engleder/tsnep_main.c:884:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=] sprintf(queue->name, "%s-rx-%d", name, ^ drivers/net/ethernet/engleder/tsnep_main.c:881:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=] sprintf(queue->name, "%s-tx-%d", name, ^ drivers/net/ethernet/engleder/tsnep_main.c:878:49: warning: '-txrx-' directive writing 6 bytes into a region of size between 5 and 25 [-Wformat-overflow=] sprintf(queue->name, "%s-txrx-%d", name, ^~~~~~ Actually overflow cannot happen. Name is limited to IFNAMSIZ, because netdev_name() is called during ndo_open(). queue_index is single char, because less than 10 queues are supported. Fix warning with snprintf(). Additionally increase buffer to 32 bytes, because those 7 additional bytes were unused anyway. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310182028.vmDthIUa-lkp@intel.com/ Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023183856.58373-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16tsnep: Inline small fragments within TX descriptorGerhard Engleder
The tsnep network controller is able to extend the descriptor directly with data to be transmitted. In this case no TX data DMA address is necessary. Instead of the TX data DMA address the TX data buffer is placed at the end of the descriptor. The descriptor is read with a 64 bytes DMA read by the tsnep network controller. If the sum of descriptor data and TX data is less than or equal to 64 bytes, then no additional DMA read is necessary to read the TX data. Therefore, it makes sense to inline small fragments up to this limit within the descriptor ring. Inlined fragments need to be copied to the descriptor ring. On the other hand DMA mapping is not necessary. At most 40 bytes are copied, so copying should be faster than DMA mapping. For A53 1.2 GHz copying takes <100ns and DMA mapping takes >200ns. So inlining small fragments should result in lower CPU load. Performance improvement is small. Thus, comparision of CPU load with and without inlining of small fragments did not show any significant difference. With this optimization less DMA reads will be done, which decreases the load of the interconnect. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-20net: ethernet: engleder: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18tsnep: Fix NAPI polling with budget 0Gerhard Engleder
According to the NAPI documentation networking/napi.rst, Rx specific APIs like page pool and XDP cannot be used at all when budget is 0. skb Tx processing should happen regardless of the budget. Stop NAPI polling after Tx processing and skip Rx processing if budget is 0. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18tsnep: Fix ethtool channelsGerhard Engleder
According to the NAPI documentation networking/napi.rst, for the ethtool API a channel is a IRQ/NAPI which services queues of a given type. tsnep uses a single IRQ/NAPI instance for every TX/RX queue pair. Therefore, combined channels shall be returned instead of separate tx/rx channels. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18tsnep: Fix NAPI schedulingGerhard Engleder
According to the NAPI documentation networking/napi.rst, drivers which have to mask interrupts explicitly should use the napi_schedule_prep() and __napi_schedule() calls. No problem seen so far with current implementation. Nevertheless, let's align the implementation with documentation. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-07page_pool: split types and declarations from page_pool.hYunsheng Lin
Split types and pure function declarations from page_pool.h and add them in page_page/types.h, so that C sources can include page_pool.h and headers should generally only include page_pool/types.h as suggested by jakub. Rename page_pool.h to page_pool/helpers.h to have both in one place. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com [Jakub: change microsoft/mana, fix kdoc paths in Documentation] Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03eth: add missing xdp.h includes in driversJakub Kicinski
Handful of drivers currently expect to get xdp.h by virtue of including netdevice.h. This will soon no longer be the case so add explicit includes. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230803010230.1755386-2-kuba@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-07-21eth: tsnep: let page recycling happen with skbsJakub Kicinski
tsnep builds an skb with napi_build_skb() and then calls page_pool_release_page() for the page in which that skb's head sits. Use recycling instead, recycling of heads works just fine. Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/20230720010409.1967072-2-kuba@kernel.org Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-31net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enumVladimir Oltean
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be able to report statistics (which is future work), it seems that we need to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) multiplexing, and pass the command as part of the common portion of the muxed structure. Since we already have an "enable" variable in tc_taprio_qopt_offload, refactor all drivers to check for "cmd" instead of "enable", and reject every other command except "replace" and "destroy" - to be future proof. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-24tsnep: Add XDP socket zero-copy TX supportGerhard Engleder
Send and complete XSK pool frames within TX NAPI context. NAPI context is triggered by ndo_xsk_wakeup. Test results with A53 1.2GHz: xdpsock txonly copy mode, 64 byte frames: pps pkts 1.00 tx 284,409 11,398,144 Two CPUs with 100% and 10% utilization. xdpsock txonly zero-copy mode, 64 byte frames: pps pkts 1.00 tx 511,929 5,890,368 Two CPUs with 100% and 1% utilization. xdpsock l2fwd copy mode, 64 byte frames: pps pkts 1.00 rx 248,985 7,315,885 tx 248,921 7,315,885 Two CPUs with 100% and 10% utilization. xdpsock l2fwd zero-copy mode, 64 byte frames: pps pkts 1.00 rx 254,735 3,039,456 tx 254,735 3,039,456 Two CPUs with 100% and 4% utilization. Packet rate increases and CPU utilization is reduced in both cases. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add XDP socket zero-copy RX supportGerhard Engleder
Add support for XSK zero-copy to RX path. The setup of the XSK pool can be done at runtime. If the netdev is running, then the queue must be disabled and enabled during reconfiguration. This can be done easily with functions introduced in previous commits. A more important property is that, if the netdev is running, then the setup of the XSK pool shall not stop the netdev in case of errors. A broken netdev after a failed XSK pool setup is bad behavior. Therefore, the allocation and setup of resources during XSK pool setup is done only before any queue is disabled. Additionally, freeing and later allocation of resources is eliminated in some cases. Page pool entries are kept for later use. Two memory models are registered in parallel. As a result, the XSK pool setup cannot fail during queue reconfiguration. In contrast to other drivers, XSK pool setup and XDP BPF program setup are separate actions. XSK pool setup can be done without any XDP BPF program. The XDP BPF program can be added, removed or changed without any reconfiguration of the XSK pool. Test results with A53 1.2GHz: xdpsock rxdrop copy mode, 64 byte frames: pps pkts 1.00 rx 856,054 10,625,775 Two CPUs with both 100% utilization. xdpsock rxdrop zero-copy mode, 64 byte frames: pps pkts 1.00 rx 889,388 4,615,284 Two CPUs with 100% and 20% utilization. Packet rate increases and CPU utilization is reduced. 100% CPU load seems to the base load. This load is consumed by ksoftirqd just for dropping the generated packets without xdpsock running. Using batch API reduced CPU utilization slightly, but measurements are not stable enough to provide meaningful numbers. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Move skb receive action to separate functionGerhard Engleder
The function tsnep_rx_poll() is already pretty long and the skb receive action can be reused for XSK zero-copy support. Move page based skb receive to separate function. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add functions for queue enable/disableGerhard Engleder
Move queue enable and disable code to separate functions. This way the activation and deactivation of the queues are defined actions, which can be used in future execution paths. This functions will be used for the queue reconfiguration at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Rework TX/RX queue initializationGerhard Engleder
Make initialization of TX and RX queues less dynamic by moving some initialization from netdev open/close to device probing. Additionally, move some initialization code to separate functions to enable future use in other execution paths. This is done as preparation for queue reconfigure at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Replace modulo operation with maskGerhard Engleder
TX/RX ring size is static and power of 2 to enable compiler to optimize modulo operation to mask operation. Make this optimization already in the code and don't rely on the compiler. CPU utilisation during high packet rate has not changed. So no performance improvement has been measured. But it is best practice to prevent modulo operations. Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22ethernet: remove superfluous clearing of phydevWolfram Sang
phy_disconnect() calls phy_detach() which already clears 'phydev' if it is attached to a struct net_device. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230321131745.27688-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-10Daniel Borkmann says:Jakub Kicinski
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-06net/sched: taprio: only pass gate mask per TXQ for igc, stmmac, tsnep, am65_cpswVladimir Oltean
There are 2 classes of in-tree drivers currently: - those who act upon struct tc_taprio_sched_entry :: gate_mask as if it holds a bit mask of TXQs - those who act upon the gate_mask as if it holds a bit mask of TCs When it comes to the standard, IEEE 802.1Q-2018 does say this in the second paragraph of section 8.6.8.4 Enhancements for scheduled traffic: | A gate control list associated with each Port contains an ordered list | of gate operations. Each gate operation changes the transmission gate | state for the gate associated with each of the Port's traffic class | queues and allows associated control operations to be scheduled. In typically obtuse language, it refers to a "traffic class queue" rather than a "traffic class" or a "queue". But careful reading of 802.1Q clarifies that "traffic class" and "queue" are in fact synonymous (see 8.6.6 Queuing frames): | A queue in this context is not necessarily a single FIFO data structure. | A queue is a record of all frames of a given traffic class awaiting | transmission on a given Bridge Port. The structure of this record is not | specified. i.o.w. their definition of "queue" isn't the Linux TX queue. The gate_mask really is input into taprio via its UAPI as a mask of traffic classes, but taprio_sched_to_offload() converts it into a TXQ mask. The breakdown of drivers which handle TC_SETUP_QDISC_TAPRIO is: - hellcreek, felix, sja1105: these are DSA switches, it's not even very clear what TXQs correspond to, other than purely software constructs. Only the mqprio configuration with 8 TCs and 1 TXQ per TC makes sense. So it's fine to convert these to a gate mask per TC. - enetc: I have the hardware and can confirm that the gate mask is per TC, and affects all TXQs (BD rings) configured for that priority. - igc: in igc_save_qbv_schedule(), the gate_mask is clearly interpreted to be per-TXQ. - tsnep: Gerhard Engleder clarifies that even though this hardware supports at most 1 TXQ per TC, the TXQ indices may be different from the TC values themselves, and it is the TXQ indices that matter to this hardware. So keep it per-TXQ as well. - stmmac: I have a GMAC datasheet, and in the EST section it does specify that the gate events are per TXQ rather than per TC. - lan966x: again, this is a switch, and while not a DSA one, the way in which it implements lan966x_mqprio_add() - by only allowing num_tc == NUM_PRIO_QUEUES (8) - makes it clear to me that TXQs are a purely software construct here as well. They seem to map 1:1 with TCs. - am65_cpsw: from looking at am65_cpsw_est_set_sched_cmds(), I get the impression that the fetch_allow variable is treated like a prio_mask. This definitely sounds closer to a per-TC gate mask rather than a per-TXQ one, and TI documentation does seem to recomment an identity mapping between TCs and TXQs. However, Roger Quadros would like to do some testing before making changes, so I'm leaving this driver to operate as it did before, for now. Link with more details at the end. Based on this breakdown, we have 5 drivers with a gate mask per TC and 4 with a gate mask per TXQ. So let's make the gate mask per TXQ the opt-in and the gate mask per TC the default. Benefit from the TC_QUERY_CAPS feature that Jakub suggested we add, and query the device driver before calling the proper ndo_setup_tc(), and figure out if it expects one or the other format. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230202003621.2679603-15-vladimir.oltean@nxp.com/#25193204 Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Siddharth Vadapalli <s-vadapalli@ti.com> Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-25tsnep: Fix TX queue stop/wake for multiple queuesGerhard Engleder
netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok as long as only a single TX queue is supported. But support for multiple TX queues was introduced with 762031375d5c and I missed to adapt stop and wake of TX queues. Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific TX queue. Fixes: 762031375d5c ("tsnep: Support multiple TX/RX queue pairs") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20net: Remove C45 check in C22 only MDIO bus driversAndrew Lunn
The MDIO core should not pass a C45 request via the C22 API call any more. So remove the tests from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-18tsnep: Support XDP BPF program setupGerhard Engleder
Implement setup of BPF programs for XDP RX path with command XDP_SETUP_PROG of ndo_bpf(). This is the final step for XDP RX path support. There is no need to reinit the RX queues as they are always prepared for XDP. Additionally remove $(tsnep-y) from $(tsnep-objs) because it is added automatically. Test results with A53 1.2GHz: XDP_DROP (samples/bpf/xdp1) proto 17: 883878 pkt/s XDP_TX (samples/bpf/xdp2) proto 17: 255693 pkt/s XDP_REDIRECT (samples/bpf/xdpsock) sock0@eth2:0 rxdrop xdp-drv pps pkts 1.00 rx 855,582 5,404,523 tx 0 0 XDP_REDIRECT (samples/bpf/xdp_redirect) eth2->eth1 613,267 rx/s 0 err,drop/s 613,272 xmit/s Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Add XDP RX supportGerhard Engleder
If BPF program is set up, then run BPF program for every received frame and execute the selected action. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Add RX queue info for XDP supportGerhard Engleder
Register xdp_rxq_info with page_pool memory model. This is needed for XDP buffer handling. Additionally fix error path by removing call of tsnep_phy_close() after failed tsnep_phy_open(). Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Prepare RX buffer for XDP supportGerhard Engleder
Always reserve XDP_PACKET_HEADROOM in front of RX buffer. Similar DMA direction is always set to DMA_BIDIRECTIONAL. This eliminates the need for RX queue reconfiguration during BPF program setup. The RX queue is always prepared for XDP. No negative impact of DMA_BIDIRECTIONAL was measured. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Subtract TSNEP_RX_INLINE_METADATA_SIZE onceGerhard Engleder
Subtract size of metadata in front of received data only once. This simplifies the RX code. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Add XDP TX supportGerhard Engleder
Implement ndo_xdp_xmit() for XDP TX support. Support for fragmented XDP frames is included. Also some braces and logic cleanups are done in normal TX path to keep both TX paths in sync. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Do not print DMA mapping errorGerhard Engleder
Printing in data path shall be avoided. DMA mapping error is already counted in stats so printing is not necessary. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Forward NAPI budget to napi_consume_skb()Gerhard Engleder
NAPI budget must be forwarded to napi_consume_skb(). It is used to detect non-NAPI context. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18tsnep: Replace TX spin_lock with __netif_tx_lockGerhard Engleder
TX spin_lock can be eliminated, because the normal TX path is already protected with __netif_tx_lock and this lock can be used for access to queue outside of normal TX path too. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-30 15:32:31 +0000