| Age | Commit message (Collapse) | Author |
|---|
|
Add coverage for the TX Extension (TEI) Interface (TTI) stats. We are
tracking packets and control message drops because of credit exhaustion
on the TX interface.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-6-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch add coverage for TMI stats including PTP stats and drop
stats.
PTP stats include illegal requests, bad timestamp and good timestamps.
The bad timestamp and illegal request counters are reported under as
`error` via `ethtool -T` Both these counters are individually being
reported via `ethtool -S`
The good timestamp stats are being reported as `pkts` via `ethtool -T`
ethtool -S eth0 | grep "ptp"
ptp_illegal_req: 0
ptp_good_ts: 0
ptp_bad_ts: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-5-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch provides coverage to the RXB (RX Buffer) stats. RXB stats
are divided into 3 sections: RXB enqueue, RXB FIFO, and RXB dequeue
stats.
The RXB enqueue/dequeue stats are indexed from 0-3 and cater for the
input/output counters whereas, the RXB fifo stats are indexed from 0-7.
The RXB also supports pause frame stats counters which we are leaving
for a later patch.
ethtool -S eth0 | grep rxb
rxb_integrity_err0: 0
rxb_mac_err0: 0
rxb_parser_err0: 0
rxb_frm_err0: 0
rxb_drbo0_frames: 1433543
rxb_drbo0_bytes: 775949081
---
---
rxb_intf3_frames: 1195711
rxb_intf3_bytes: 739650210
rxb_pbuf3_frames: 1195711
rxb_pbuf3_bytes: 765948092
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-4-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch provides support for hardware queue stats and covers
packet errors for RX-DMA engine, RCQ drops and BDQ drops.
The packet errors are also aggregated with the `rx_errors` stats in the
`rtnl_link_stats` as well as with the `hw_drops` in the queue API.
The RCQ and BDQ drops are aggregated with `rx_over_errors` in the
`rtnl_link_stats` as well as with the `hw_drop_overruns` in the queue API.
ethtool -S eth0 | grep -E 'rde'
rde_0_pkt_err: 0
rde_0_pkt_cq_drop: 0
rde_0_pkt_bdq_drop: 0
---
---
rde_127_pkt_err: 0
rde_127_pkt_cq_drop: 0
rde_127_pkt_bdq_drop: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support ethtool -g / -G. Leverage the code added for -l / -L
to alloc / stop / start / free.
Check parameters against HW min/max but also our own min/max.
Min HW queue is 16 entries, we can't deal with TWQs that small
because of the queue waking logic. Add similar contraint on RCQ
for symmetry.
We need 3 sizes on Rx, as the NIC does header-data split two separate
buffer pools:
(1) head page ring - how many empty pages we post for headers
(2) payload page ring - how many empty pages we post for payloads
(3) completion ring - where NIC produces the Rx descriptors
Acked-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250306145150.1757263-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ethtool support to configure the IRQ coalescing behavior. Support
separate timers for Rx and Tx for time based coalescing. For frame based
configuration, currently we only support the Rx side.
The hardware allows configuration of descriptor count instead of frame
count requiring conversion between the two. We assume 2 descriptors
per frame, one for the metadata and one for the data segment.
When rx-frames are not configured, we set the RX descriptor count to
half the ring size as a fail safe.
Default configuration:
ethtool -c eth0 | grep -E "rx-usecs:|tx-usecs:|rx-frames:"
rx-usecs: 30
rx-frames: 0
tx-usecs: 35
IRQ rate test:
With single iperf flow we monitor IRQ rate while changing the tx-usesc and
rx-usecs to high and low values.
ethtool -C eth0 rx-frames 8192 rx-usecs 150 tx-usecs 150
irq/sec 13k
irq/sec 14k
irq/sec 14k
ethtool -C eth0 rx-frames 8192 rx-usecs 10 tx-usecs 10
irq/sec 27k
irq/sec 28k
irq/sec 28k
Validating the use of extack:
ethtool -C eth0 rx-frames 16384
netlink error: fbnic: rx_frames is above device max
netlink error: Invalid argument
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250218023520.2038010-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The queue stats struct is used for Rx and Tx queues. Wrap
the Tx stats in a struct and a union, so that we can reuse
the same space for Rx stats on Rx queues.
This also makes it easy to add an assert to the stat handling
code to catch new stats not being aggregated on shutdown.
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ethtool -n / -N support. Support only "un-ordered" rule sets
(RX_CLS_LOC_ANY), just for simplicity of the code. It's unclear
anyone actually cares about the rule ordering.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20250206235334.1425329-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for an extra RSS context. The device has a primary
and a secondary context.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250206235334.1425329-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the channel count changes. Copy the netdev priv,
allocate new channels using it. Stop, swap, start.
Then free the copy of the priv along with the channels it
holds, which are now the channels that used to be on the
real priv.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241220025241.1522781-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trivial implementation of ethtool channel get and set. Set is only
supported when device is closed, next patch will add code for
live reconfig.
Asymmetric configurations are supported (combined + extra Tx or Rx),
so are configurations with independent IRQs for Rx and Tx.
Having all 3 NAPI types (combined, Tx, Rx) is not supported.
We used to only call fbnic_reset_indir_tbl() during init.
Now that we call it after device had been register must
be careful not to override user config.
Link: https://patch.msgid.link/20241220025241.1522781-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support setting the fields over which RSS computes its hash.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241220025241.1522781-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the user program the RSS indirection table and the RSS key.
Straightforward implementation. Track the changes and don't bother
poking the HW if user asked for a config identical to what's already
programmed. The device only supports Toeplitz hash.
Similarly to the GET support - all the real code that does the programming
was part of initial driver submission, already.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241220025241.1522781-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The initial driver submission already added all the RSS state,
as part of multi-queue support. Expose the configuration via
the ethtool APIs.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241220025241.1522781-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define ethtool callback handlers in order in which they are defined
in the ops struct. It doesn't really matter what the order is,
but it's good to have an order.
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20241220025241.1522781-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report Rx parser statistics via ethtool -S.
The parser stats are 32b, so we need to add refresh to the service
task to make sure we don't miss overflows.
Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241115015344.757567-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paolo noticed that we are missing SPDX headers, add them.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241115015344.757567-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the 'ethtool -d <dev>' command to retrieve and print
a register dump for fbnic. The dump defaults to version 1 and consists
of two parts: all the register sections that can be dumped linearly, and
an RPC RAM section that is structured in an interleaved fashion and
requires special handling. For each register section, the dump also
contains the start and end boundary information which can simplify parsing.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20241112222605.3303211-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add counters of packets with HW timestamps requests and lost timestamps
with no associated skbs. Use ethtool interface to report these counters.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add TX configuration to ethtool interface. Add processing of TX
timestamp completions as well as configuration to request HW to create
TX timestamp completion.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add callbacks to support timestamping configuration via ethtool.
Add processing of RX timestamps.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add software TX timestamping support. RX software timestamping is
implemented in the core and there is no need to provide special flag
in the driver anymore.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for group stats for mac. The fbnic_set_counter help preserve
the default values for counters which are not touched by the driver.
The 'reset' flag in 'get_eth_mac_stats' allows to choose between
resetting the counter to recent most value or fetching the aggregated
values of the counter.
The 'fbnic_stat_rd64' read 64b stats counters in an atomic fashion using
read-read-read approach. This allows to isolate cases where counter is
moving too fast making accuracy of the counter questionable.
Command: ethtool -S eth0 --groups eth-mac
Example Output:
eth-mac-FramesTransmittedOK: 421644
eth-mac-FramesReceivedOK: 3849708
eth-mac-FrameCheckSequenceErrors: 0
eth-mac-AlignmentErrors: 0
eth-mac-OctetsTransmittedOK: 64799060
eth-mac-FramesLostDueToIntMACXmitError: 0
eth-mac-OctetsReceivedOK: 5134513531
eth-mac-FramesLostDueToIntMACRcvError: 0
eth-mac-MulticastFramesXmittedOK: 568
eth-mac-BroadcastFramesXmittedOK: 454
eth-mac-MulticastFramesReceivedOK: 276106
eth-mac-BroadcastFramesReceivedOK: 26119
eth-mac-FrameTooLongErrors: 0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ethtool ops support and enable 'get_drvinfo' for fbnic. The driver
provides firmware version information while the driver name and bus
information is provided by ethtool_get_drvinfo().
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
