summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qualcomm/qca_debug.c
AgeCommit message (Collapse)Author
2024-10-09qca_spi: Improve reset mechanismStefan Wahren
The commit 92717c2356cb ("net: qca_spi: Avoid high load if QCA7000 is not available") fixed the high load in case the QCA7000 is not available but introduced sync delays for some corner cases like buffer errors. So add the reset requests to the atomics flags, which are polled by the SPI thread. As a result reset requests and sync state are now separated. This has the nice benefit to make the code easier to understand. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20241007113312.38728-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18qca_spi: Make interrupt remembering atomicStefan Wahren
The whole mechanism to remember occurred SPI interrupts is not atomic, which could lead to unexpected behavior. So fix this by using atomic bit operations instead. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@gmx.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-31qca_7k: Replace BSD boilerplate with SPDXStefan Wahren
According to MODULE_LICENSE the driver is under a dual license. So replace the BSD license text with the proper SPDX tag. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Add QCASPI prefix to ring definesStefan Wahren
All defines in qca_spi.h except of the two ring limit defines have a QCASPI prefix. Since the name is quite generic add the QCASPI prefix to avoid possible name conflicts. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08qca_debug: Fix ethtool -G iface tx behaviorStefan Wahren
After calling ethtool -g it was not possible to adjust the TX ring size again: # ethtool -g eth1 Ring parameters for eth1: Pre-set maximums: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 Current hardware settings: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 # ethtool -G eth1 tx 8 netlink error: Invalid argument The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08qca_debug: Prevent crash on TX ring changesStefan Wahren
The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash. So prevent this by stopping the network traffic handling and temporary park the SPI thread. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-11net: Replace all spi->chip_select and spi->cs_gpiod references with function ↵Amit Kumar Mahapatra
call Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod members of struct spi_device to be an array. But changing the type of these members to array would break the spi driver functionality. To make the transition smoother introduced four new APIs to get/set the spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and spi->cs_gpiod references with get or set API calls. While adding multi-cs support in further patches the chip_select & cs_gpiod members of the spi_device structure would be converted to arrays & the "idx" parameter of the APIs would be used as array index i.e., spi->chip_select[idx] & spi->cs_gpiod[idx] respectively. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230310173217.3429788-3-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10net: qca_spi: Introduce stat about bad signatureStefan Wahren
In order to identify significant signature issues add a new stat counter, which increases on bad signature values that causes a sync loss. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-10qca: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "David S. Miller" <davem@davemloft.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Michael Heimpold <michael.heimpold@i2se.com> Cc: Yangtao Li <tiny.windzz@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: qca_spi: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: qca_spi: Add available buffer space verificationStefan Wahren
Interferences on the SPI line could distort the response of available buffer space. So at least we should check that the response doesn't exceed the maximum available buffer space. In error case increase a new error counter and retry it later. This behavior avoids buffer errors in the QCA7000, which results in an unnecessary chip reset including packet loss. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24net: qca_spi: Introduce write register verificationStefan Wahren
The SPI protocol for the QCA7000 doesn't have any fault detection. In order to increase the drivers reliability in noisy environments, we could implement a write verification inspired by the enc28j60. This should avoid situations were the driver wrongly assumes the receive interrupt is enabled and miss all incoming packets. This function is disabled per default and can be controlled via module parameter wr_verify. Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30net: qualcomm: use net_device_ops instead of direct callStefan Wahren
There is no need to export qcaspi_netdev_open and qcaspi_netdev_close because they are also accessible via the net_device_ops. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qualcomm: qca: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29net: qualcomm: new Ethernet over SPI driver for QCA7000Stefan Wahren
This patch adds the Ethernet over SPI driver for the Qualcomm QCA7000 HomePlug GreenPHY. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-25 02:12:16 +0000