summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtw88/main.h
AgeCommit message (Collapse)Author
2025-04-09wifi: rtw88: Don't set SUPPORTS_AMSDU_IN_AMPDU for RTL8814AUBitterblue Smith
RTL8814AU doesn't work well with SUPPORTS_AMSDU_IN_AMPDU. The RX speed is noticeably lower and the VHT RX statistics are strange. Typical values with SUPPORTS_AMSDU_IN_AMPDU: Reverse mode, remote host 192.168.0.1 is sending [ 5] local 192.168.0.50 port 60710 connected to 192.168.0.1 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 74.6 MBytes 626 Mbits/sec [ 5] 1.00-2.00 sec 79.2 MBytes 665 Mbits/sec [ 5] 2.00-3.00 sec 84.9 MBytes 712 Mbits/sec [ 5] 3.00-4.00 sec 83.8 MBytes 703 Mbits/sec [ 5] 4.00-5.00 sec 85.9 MBytes 720 Mbits/sec [ 5] 5.00-6.00 sec 78.9 MBytes 662 Mbits/sec [ 5] 6.00-7.00 sec 81.2 MBytes 682 Mbits/sec [ 5] 7.00-8.00 sec 80.5 MBytes 675 Mbits/sec [ 5] 8.00-9.00 sec 79.4 MBytes 666 Mbits/sec [ 5] 9.00-10.00 sec 82.2 MBytes 689 Mbits/sec [ 5] 10.00-11.00 sec 82.0 MBytes 688 Mbits/sec [ 5] 11.00-12.00 sec 84.2 MBytes 707 Mbits/sec [ 5] 12.00-13.00 sec 71.0 MBytes 596 Mbits/sec [ 5] 13.00-14.00 sec 69.4 MBytes 582 Mbits/sec [ 5] 14.00-15.00 sec 80.2 MBytes 673 Mbits/sec [ 5] 15.00-16.00 sec 74.5 MBytes 625 Mbits/sec [Rx Counter]: * CCA (CCK, OFDM, Total) = (0, 2455, 2455) * False Alarm (CCK, OFDM, Total) = (0, 69, 69) * CCK cnt (ok, err) = (0, 0) * OFDM cnt (ok, err) = (1239, 2) * HT cnt (ok, err) = (0, 0) * VHT cnt (ok, err) = (21, 12109) The "VHT ok" number is not believable. And without SUPPORTS_AMSDU_IN_AMPDU: Reverse mode, remote host 192.168.0.1 is sending [ 5] local 192.168.0.50 port 50030 connected to 192.168.0.1 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 70.5 MBytes 591 Mbits/sec [ 5] 1.00-2.00 sec 86.9 MBytes 729 Mbits/sec [ 5] 2.00-3.00 sec 98.6 MBytes 827 Mbits/sec [ 5] 3.00-4.00 sec 97.4 MBytes 817 Mbits/sec [ 5] 4.00-5.00 sec 98.6 MBytes 827 Mbits/sec [ 5] 5.00-6.00 sec 96.9 MBytes 813 Mbits/sec [ 5] 6.00-7.00 sec 98.2 MBytes 824 Mbits/sec [ 5] 7.00-8.00 sec 98.0 MBytes 822 Mbits/sec [ 5] 8.00-9.00 sec 99.9 MBytes 838 Mbits/sec [ 5] 9.00-10.00 sec 99.2 MBytes 833 Mbits/sec [ 5] 10.00-11.00 sec 98.0 MBytes 822 Mbits/sec [ 5] 11.00-12.00 sec 98.1 MBytes 823 Mbits/sec [ 5] 12.00-13.00 sec 97.0 MBytes 814 Mbits/sec [ 5] 13.00-14.00 sec 98.2 MBytes 824 Mbits/sec [ 5] 14.00-15.00 sec 98.5 MBytes 826 Mbits/sec [ 5] 15.00-16.00 sec 97.4 MBytes 817 Mbits/sec [Rx Counter]: * CCA (CCK, OFDM, Total) = (0, 3860, 3860) * False Alarm (CCK, OFDM, Total) = (0, 2, 2) * CCK cnt (ok, err) = (0, 0) * OFDM cnt (ok, err) = (1486, 0) * HT cnt (ok, err) = (0, 0) * VHT cnt (ok, err) = (7399, 9118) Add a new member "amsdu_in_ampdu" in struct rtw_chip_info and use it to set SUPPORTS_AMSDU_IN_AMPDU only for the other chips. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/6202ccfb-feb0-4107-a08d-db2699e179f0@gmail.com
2025-04-09wifi: rtw88: Set AMPDU factor to hardware for RTL8814ABitterblue Smith
Tell the chip the maximum AMPDU size supported by the AP. This greatly improves the TX speed of RTL8814AU in the 2.4 GHz band. Before: ~90 Mbps. After: ~300 Mbps. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/4edc2a63-81b3-431c-9a37-5a7d899a6cc2@gmail.com
2025-03-13wifi: rtw88: Add __nonstring annotations for unterminated stringsKees Cook
When a character array without a terminating NUL character has a static initializer, GCC 15's -Wunterminated-string-initialization will only warn if the array lacks the "nonstring" attribute[1]. Mark the arrays with __nonstring to and correctly identify the char array as "not a C string" and thereby eliminate the warning. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250310222257.work.866-kees@kernel.org
2025-02-21wifi: rtw88: Fix rtw_rx_phy_stat() for RTL8814AUBitterblue Smith
Record statistics for the 3SS rates too. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/39e3c7cf-37ed-4c0e-af00-dcd9eab351f0@gmail.com
2025-02-10wifi: rtw88: Extend TX power stuff for 3-4 spatial streamsBitterblue Smith
Although the RTL8814AU only has 3 spatial streams, maybe some other chip has 4. Correct the TX power index and TX power limit calculations for 3SS and 4SS HT/VHT rates. With this the RTL8814AU can set the TX power correctly. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/d0c0e126-0794-4c4e-9203-ea39a707b673@gmail.com
2025-02-10wifi: rtw88: Rename RTW_RATE_SECTION_MAX to RTW_RATE_SECTION_NUMBitterblue Smith
It fits the meaning of the enum better. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/5a1c5a46-8ebb-43b0-9ab1-b78e2a22b3d2@gmail.com
2025-02-10wifi: rtw88: Constify some more structs and arraysBitterblue Smith
These structs and arrays are never modified, so make them const: rtw_band_2ghz rtw_band_5ghz rtw_pci_tx_queue_idx_addr rtw_pci_ops rtw_cck_rates rtw_ofdm_rates rtw_ht_1s_rates rtw_ht_2s_rates rtw_vht_1s_rates rtw_vht_2s_rates rtw_rate_section rtw_rate_size rtw_sdio_ops rtw_usb_ops Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/502f124e-ccf3-4c09-80a4-1e5c5304822b@gmail.com
2025-02-10wifi: rtw88: Extend rtw_fw_send_ra_info() for RTL8814AUBitterblue Smith
The existing code is suitable for chips with up to 2 spatial streams. Inform the firmware about the rates it's allowed to use when transmitting 3 spatial streams. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/08e2f328-1aab-4e50-93ac-c1e5dd9541ac@gmail.com
2025-02-10wifi: rtw88: Extend rf_base_addr and rf_sipi_addr for RTL8814AUBitterblue Smith
These members of struct rtw_chip_info each have a size of 2. Increase their size to 4, which is the number of RF paths the RTL8814AU has. This is required to read and write the RF registers of the RTL8814AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/7a4d8209-b8af-4943-b5de-f53d6edf591a@gmail.com
2025-02-10wifi: rtw88: Extend struct rtw_pwr_track_tbl for RTL8814AUBitterblue Smith
Currently this struct has the members required for chips with 2 RF paths. Add more members to support chips with 4 RF paths, like the RTL8814AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/be5a73f4-a0fe-43d6-9457-930cde199284@gmail.com
2025-01-12wifi: rtw88: Add support for LED blinkingBitterblue Smith
Register a struct led_classdev with the kernel's LED subsystem and create a throughput-based trigger for it. Then mac80211 makes the LED blink. Tested with Tenda U12 (RTL8812AU), Tenda U9 (RTL8811CU), TP-Link Archer T2U Nano (RTL8811AU), TP-Link Archer T3U Plus (RTL8812BU), Edimax EW-7611UCB (RTL8821AU), LM842 (RTL8822CU). Also tested with devices which don't have LEDs: the laptop's internal RTL8822CE and a no-name RTL8723DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/6c43451f-ab2f-4e76-ac6e-ff5a18dd981d@gmail.com
2025-01-12wifi: rtw88: Delete rf_type member of struct rtw_sta_infoBitterblue Smith
It's not used for anything. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/b80f7904-c6b4-4d12-a5f9-69ab9b965732@gmail.com
2024-12-23wifi: rtw88: add __packed attribute to efuse layout structPing-Ke Shih
The layout struct of efuse should not do address alignment by compiler. Otherwise it leads unexpected layout and size for certain arch suc as arm. In x86-64, the results are identical before and after this patch. Also adjust bit-field to prevent over adjacent byte to avoid warning: rtw88/rtw8822b.h:66:1: note: offset of packed bit-field `res2` has changed in GCC 4.4 66 | } __packed; | ^ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412120131.qk0x6OhE-lkp@intel.com/ Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241212054203.135046-1-pkshih@realtek.com
2024-10-29wifi: rtw88: coex: Support chips without a scoreboardBitterblue Smith
All the chips currently supported have a "scoreboard": the chip keeps track of certain things related to bluetooth, for example, whether bluetooth is active. The information can be read from register 0xaa. RTL8821AU doesn't have this. Implement bluetooth activity detection in rtw_coex_monitor_bt_enable() based on the bluetooth TX/RX counters. This is mostly important for RTL8811AU, the version of RTL8821AU without bluetooth. Without this change, the driver thinks bluetooth is active and the wifi speeds are low. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/5058f23d-2086-42cd-82ad-eef31a348467@gmail.com
2024-10-29wifi: rtw88: Move pwr_track_tbl to struct rtw_rfe_defBitterblue Smith
RTL8812AU uses one set of TX power tracking tables for RFE 3, and another set for everything else. Move pwr_track_tbl from struct rtw_chip_info to struct rtw_rfe_def in order to load the right set of tables for each RFE (RF front end) type. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/904d0ab1-c046-40cd-a3a3-d4fdcf663c9d@gmail.com
2024-10-29wifi: rtw88: Support TX page sizes bigger than 128Bitterblue Smith
All the chips supported so far have a TX page size of 128 bytes. Change the type of the page_size member of struct rtw_chip_info from u8 to u16 in order to support RTL8821AU (page size of 256 bytes) and RTL8812AU (page size of 512 bytes). Also change the types of several related variables and function parameters from u8 to u16. The TX page size is used, among other things, to construct the beacon, null data, QOS null data, and PS poll templates which are uploaded to the chip's reserved page. Each template needs to be aligned on a multiple of the TX page size. Power saving can't work if the TX page size is wrong. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/acdefbb1-3daf-4349-9e03-9472754d5f1e@gmail.com
2024-10-29wifi: rtw88: Make txagc_remnant_ofdm an arrayBitterblue Smith
txagc_remnant_ofdm member of struct rtw_dm_info should be different for each RF path, so make it an array of size RTW_RF_PATH_MAX (4). Until now all the chips using this had only one RF path, but RTL8812AU has two, and RTL8814AU has four. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/68571ba9-e504-4b2d-bfa1-62f468753649@gmail.com
2024-10-29wifi: rtw88: Enable data rate fallback for older chipsBitterblue Smith
RTL8811AU fails to perform the 4-way handshake when the AP is too far because it transmits the EAPOL frames at MCS9 and when that doesn't work it retries 48 times with the same rate, to no avail. Retrying 48 times with the same rate seems pointless. Set the appropriate field in the TX descriptor to allow it to use lower rates when retrying. Set it for RTL8723D and RTL8703B because they interpret this field the same way as RTL8811A. The newer RTL8822C, RTL8822B, RTL8821C seem to interpret this field in the TX descriptor differently, so leave it alone for those chips. Tested with RTL8811AU and RTL8723DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/2b3e3e6f-541b-4a3b-8ca3-65b267e6a95a@gmail.com
2024-10-29wifi: rtw88: Let each driver control the power on/off processBitterblue Smith
RTL8821AU and RTL8812AU have to do some things differently, so let them have full control. The other chips use the same functions as before. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/98ab839f-9100-44ae-9551-9af743a4aa3a@gmail.com
2024-10-29wifi: rtw88: Extend the init table parsing for RTL8812AUBitterblue Smith
The chips supported so far only use the first condition, and so the parsing code ignores the second condition. RTL8812AU's init tables use the second condition also. Make the parsing code check it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/1bee6b74-6eab-44a3-9f40-794ca006c72d@gmail.com
2024-10-29wifi: rtw88: Allow different C2H RA report sizesBitterblue Smith
The RTL8821AU and RTL8812AU have smaller RA report size, only 4 bytes. Avoid the "invalid ra report c2h length" error. Also, use a struct and u8_get_bits() to access the RA report C2H. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/c3e73c3a-fb2f-4013-9f06-d5274211e282@gmail.com
2024-10-29wifi: rtw88: Dump the HW features only for some chipsBitterblue Smith
RTL8821AU and RTL8812AU don't support this. They hit the "failed to read hw feature report" error. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/8becd851-8760-4480-8e8c-c4869ce72507@gmail.com
2024-10-29wifi: rtw88: Add some definitions for RTL8821AU/RTL8812AUBitterblue Smith
Add 8821A and 8812A chip type enums. Add cck_high_power member to struct rtw_hal. This will be used to calculate the RX signal strength of RTL8812AU. Add various register definitions which will be used by the new drivers. Move some existing register definitions from rtw8821c.h and rtw8822b.h. They were duplicated in those headers and will also be used by the new drivers. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/9279a9cd-6f86-4dc3-a095-7c36cb9b9d06@gmail.com
2024-09-26wifi: rtw88: Parse the RX descriptor with a single functionBitterblue Smith
rtw8703b_query_rx_desc(), rtw8723d_query_rx_desc(), rtw8821c_query_rx_desc(), rtw8822b_query_rx_desc(), and rtw8822c_query_rx_desc() are almost identical, so replace them all with a single function, rtw_rx_query_rx_desc(). Also, access the RX descriptor using a struct with __le32 members and le32_get_bits(). Tested with RTL8811CU, RTL8811AU, and RTL8812AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Tested-by: Ping-Ke Shih <pkshih@realtek.com> # RTL8723DE and RTL8822CE Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/913f1747-38fc-4409-85a4-57bb9cee506b@gmail.com
2024-09-20wifi: rtw88: Constify some arrays and structsBitterblue Smith
These are never modified, so make them const: card_enable_flow_8703b card_disable_flow_8703b rtw8703b_ops rtw8723d_ops card_enable_flow_8723d card_disable_flow_8723d trans_carddis_to_cardemu_8821c trans_cardemu_to_act_8821c trans_act_to_cardemu_8821c trans_cardemu_to_carddis_8821c card_enable_flow_8821c card_disable_flow_8821c rtw8821c_dig page_table_8821c rqpn_table_8821c prioq_addrs_8821c rtw8821c_ops card_enable_flow_8822b card_disable_flow_8822b prioq_addrs_8822b rtw8822b_ops rtw8822b_edcca_th card_enable_flow_8822c card_disable_flow_8822c prioq_addrs_8822c rtw8822c_ops rtw8822c_edcca_th Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/dae7994f-3491-40de-b537-ebf68df084bb@gmail.com
2024-09-02wifi: rtw88: assign mac_id for vif/sta and update to TX descPing-Ke Shih
A mac_id as an instance in firmware has to be assigned for each station including AP and connected stations. Firmware will use the mac_id to control TX rate and do statistics. Assignment rule is to assign mac_id to each vif when adding vif. For station mode, sta->mac_id will reuse vif->mac_id. For AP mode, dynamically allocate an sta->mac_id to a station, and vif->mac_id is used to send broadcast/multicast packets which are not belong to a station. For example, vif->mac_id sta->mac_id vif0 (STA mode) 0 0 vif1 (AP mode) 1 2... By the way, remove unused RTW_BC_MC_MACID, which was planed to send broadcast/multicast packets on fixed mac_id. Tested-on RTL8822CE with STA + AP SCC mode. Link: https://lore.kernel.org/linux-wireless/e4be0a75-43b2-4ae5-9aab-5c4a88e78097@gmail.com/ Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819025248.17939-1-pkshih@realtek.com
2024-08-02wifi: rtw88: 8822c: Parse channel from IE to correct invalid hardware reportsPo-Hao Huang
For CCK packets we could get incorrect reports from hardware. And this causes wrong frequencies being reported. Parse the channel information from IE if provided by AP to fix this. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240724050501.7550-1-pkshih@realtek.com
2024-07-31wifi: rtw88: debugfs: support multiple adapters debuggingPing-Ke Shih
Originally in order to read partial registers from large area, we write a range value stored into a static variable and read registers according to the static variable. However, if we install more than one adapters supported by this driver, the static variables will be overwritten by latter adapters. To resolve the problem, move the static variables to struct rtw_dev for each adapter. With changes, smatch spends too much time to parse rtw_debugfs_init(): debug.c:1289 rtw_debugfs_init() parse error: turning off implications after 60 seconds Move stuffs of adding debugfs entries to three rtw_debugfs_add_xxx() functions. Reported-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Closes: https://lore.kernel.org/linux-wireless/cd6a2acf3c2c36d938b40140b52a779516f446a9.camel@realtek.com/T/#m27662022c70d9f893ba96f6c6a8dd8fce2434dfe Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240718064155.38955-1-pkshih@realtek.com
2024-07-17wifi: rtw88: usb: Support USB 3 with RTL8822CU/RTL8822BUBitterblue Smith
The Realtek wifi 5 devices which support USB 3 are weird: when first plugged in, they pretend to be USB 2. The driver needs to send some commands to the device, which make it disappear and come back as a USB 3 device. Implement the required commands in rtw88. When a USB 3 device is plugged into a USB 2 port, rtw88 will try to switch it to USB 3 mode only once. The device will disappear and come back still in USB 2 mode, of course. Some people experience heavy interference in the 2.4 GHz band in USB 3 mode, so add a module parameter switch_usb_mode with the default value 1 to let people disable the switching. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/77906c62-5674-426f-bde1-1b2a12a0339d@gmail.com
2024-06-21wifi: rtw88: usb: Further limit the TX aggregationBitterblue Smith
Currently the number of frames sent to the chip in a single USB Request Block is limited only by the size of the TX buffer, which is 20 KiB. Testing reveals that as many as 13 frames get aggregated. This is more than what any of the chips would like to receive. RTL8822CU, RTL8822BU, and RTL8821CU want at most 3 frames, and RTL8723DU wants only 1 frame per URB. RTL8723DU in particular reliably malfunctions during a speed test if it receives more than 1 frame per URB. All traffic seems to stop. Pinging the AP no longer works. Fix this problem by limiting the number of frames sent to the chip in a single URB according to what each chip likes. Also configure RTL8822CU, RTL8822BU, and RTL8821CU to expect 3 frames per URB. RTL8703B may or may not be found in USB devices. Declare that it wants only 1 frame per URB, just in case. Tested with RTL8723DU and RTL8811CU. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/cb46ea35-7e59-4742-9c1f-01ceeaad36fb@gmail.com
2024-03-14wifi: rtw88: Add definitions for 8703b chipFiona Klute
default_cck_index is used in power track, the rx_cck_agc_report_type for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used by the other chip drivers. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-4-fiona.klute@gmx.de
2023-12-19wifi: rtw88: use cfg80211_ssid_eq() instead of rtw_ssid_equal()Dmitry Antipov
Prefer generic 'cfg80211_ssid_eq()' over dropped 'rtw_ssid_equal()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20231215123859.196350-3-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-19wifi: rtw88: dump firmware debug information in abnormal stateChin-Yen Lee
Sometimes firmware may enter strange state or infinite loop due to unknown bug, and then it will lead critical function fail, such as sending H2C command or changing power mode. In these abnormal states, we add more debug information, including hardware register status, to help further investigation. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231016053554.744180-3-pkshih@realtek.com
2023-10-09wifi: rtw88: regd: configure QATAR and UKZong-Zhe Yang
In newer Realtek parameter package, Realtek regd can configure QATAR and UK individually. So, driver extends the regd enum. Besides, driver configure alternative of them which will be referenced when parameter package of a chip doesn't consider QATAR and UK individually. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231004085051.205683-2-pkshih@realtek.com
2023-07-25wifi: rtw88: remove unused and set but unused leftoversDmitry Antipov
Drop unused and set but unused 'last_push' of 'struct rtw_txq', 'wireless_set' of 'struct rtw_sta_info', 'usb_txagg_num' of 'struct rtw_usb' and 'n' of 'struct rx_usb_ctrl_block', unused definition of 'struct rtw_timer_list', adjust related code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230628072327.167196-2-dmantipov@yandex.ru
2023-06-21wifi: rtw88: fix not entering PS mode after AP stopsPo-Hao Huang
Without this patch, firmware only track beacons for port 0 and since we will always start AP on port 0, this results in misbehavior of power saving mode on other ports after AP stops. The "default port" H2C command is used to notify which port should firmware track. Update the correct settings to firmware so power saving mode can work properly. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-7-pkshih@realtek.com
2023-05-12wifi: rtw88: use work to update rate to avoid RCU warningPing-Ke Shih
The ieee80211_ops::sta_rc_update must be atomic, because ieee80211_chan_bw_change() holds rcu_read lock while calling drv_sta_rc_update(), so create a work to do original things. Voluntary context switch within RCU read-side critical section! WARNING: CPU: 0 PID: 4621 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x571/0x5d0 CPU: 0 PID: 4621 Comm: kworker/u16:2 Tainted: G W OE Workqueue: phy3 ieee80211_chswitch_work [mac80211] RIP: 0010:rcu_note_context_switch+0x571/0x5d0 Call Trace: <TASK> __schedule+0xb0/0x1460 ? __mod_timer+0x116/0x360 schedule+0x5a/0xc0 schedule_timeout+0x87/0x150 ? trace_raw_output_tick_stop+0x60/0x60 wait_for_completion_timeout+0x7b/0x140 usb_start_wait_urb+0x82/0x160 [usbcore usb_control_msg+0xe3/0x140 [usbcore rtw_usb_read+0x88/0xe0 [rtw_usb rtw_usb_read8+0xf/0x10 [rtw_usb rtw_fw_send_h2c_command+0xa0/0x170 [rtw_core rtw_fw_send_ra_info+0xc9/0xf0 [rtw_core drv_sta_rc_update+0x7c/0x160 [mac80211 ieee80211_chan_bw_change+0xfb/0x110 [mac80211 ieee80211_change_chanctx+0x38/0x130 [mac80211 ieee80211_vif_use_reserved_switch+0x34e/0x900 [mac80211 ieee80211_link_use_reserved_context+0x88/0xe0 [mac80211 ieee80211_chswitch_work+0x95/0x170 [mac80211 process_one_work+0x201/0x410 worker_thread+0x4a/0x3b0 ? process_one_work+0x410/0x410 kthread+0xe1/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Cc: stable@vger.kernel.org Fixes: c1edc86472fc ("rtw88: add ieee80211:sta_rc_update ops") Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/linux-wireless/f1e31e8e-f84e-3791-50fb-663a83c5c6e9@lwfinger.net/T/#t Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230508085429.46653-1-pkshih@realtek.com
2023-04-20wifi: rtw88: Update spelling in main.hSimon Horman
Update spelling in comments in main.h Found by inspection. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418-rtw88-starspell-v1-1-70e52a23979b@kernel.org
2023-04-20wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variantSascha Hauer
We have to call rtw8821c_switch_rf_set() with SWITCH_TO_WLG or SWITCH_TO_BTG according to the chip variant as denoted in rfe_option. The information which argument to use for which variant has been taken from the vendor driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417140358.2240429-5-s.hauer@pengutronix.de
2023-04-20wifi: rtw88: set pkg_type correctly for specific rtw8821c variantsSascha Hauer
According to the vendor driver the pkg_type has to be set to '1' for some rtw8821c variants. As the pkg_type has been hardcoded to '0', add a field for it in struct rtw_hal and set this correctly in the rtw8821c part. With this parsing of a rtw_table is influenced and check_positive() in phy.c returns true for some cases here. The same is done in the vendor driver. However, this has no visible effect on the driver here. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417140358.2240429-4-s.hauer@pengutronix.de
2023-04-20wifi: rtw88: handle station mode concurrent scan with AP modePo-Hao Huang
This patch allows vifs sharing same hardware with the AP mode vif to do scan, do note that this could lead to packet loss or disconnection of the AP's clients. Since we don't have chanctx, update scan info upon set channel so bandwidth changes won't go unnoticed and get misconfigured after scan. Download beacon just before scan starts to allow hardware to get proper content to do beaconing. Last, beacons should only be transmitted in AP's operating channel. Turn related beacon functions off while we're in other channels so the receiving stations won't get confused. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121323.18008-1-pkshih@realtek.com
2023-04-20wifi: rtw88: disallow PS during AP modePo-Hao Huang
Firmware can't support PS mode during AP mode, so disallow this case. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-5-pkshih@realtek.com
2023-04-20wifi: rtw88: 8822c: extend reserved page numberPo-Hao Huang
Extend 8822c's reserved page number to accommodate additional required pages. Reserved page is an area of memory in the FIFO dedicated for special purposes. Previously only one interface is supported so 8 pages should suffice, extend it so we can support 2 interfaces concurrently. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-4-pkshih@realtek.com
2023-04-20wifi: rtw88: add port switch for AP modePo-Hao Huang
Switch port settings if AP mode does not start on port 0 because of hardware limitation. For some ICs, beacons on ports other than zero could misbehave and do not issue properly, to fix this we change AP VIFs to port zero when multiple interfaces is active. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-3-pkshih@realtek.com
2023-04-20wifi: rtw88: add bitmap for dynamic port settingsPo-Hao Huang
In order to support multiple interfaces, multiple port settings will be required. Current code always uses port 0 and should be changed. Declare a bitmap with size equal to hardware port number to record the current usage. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-2-pkshih@realtek.com
2023-02-17wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twicePing-Ke Shih
Use power state to decide whether we can enter or leave IPS accurately, and then prevent to power on/off twice. The commit 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS") would like to prevent this as well, but it still can't entirely handle all cases. The exception is that WiFi gets connected and does suspend/resume, it will power on twice and cause it failed to power on after resuming, like: rtw_8723de 0000:03:00.0: failed to poll offset=0x6 mask=0x2 value=0x2 rtw_8723de 0000:03:00.0: mac power on failed rtw_8723de 0000:03:00.0: failed to power on mac rtw_8723de 0000:03:00.0: leave idle state failed rtw_8723de 0000:03:00.0: failed to leave ips state rtw_8723de 0000:03:00.0: failed to leave idle state rtw_8723de 0000:03:00.0: failed to send h2c command To fix this, introduce new flag RTW_FLAG_POWERON to reflect power state, and call rtw_mac_pre_system_cfg() to configure registers properly between power-off/-on. Reported-by: Paul Gover <pmw.gover@yahoo.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217016 Fixes: 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS") Cc: <Stable@vger.kernel.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230216053633.20366-1-pkshih@realtek.com
2022-12-08wifi: rtw88: Add common USB chip supportSascha Hauer
Add the common bits and pieces to add USB support to the RTW88 driver. This is based on https://github.com/ulli-kroll/rtw88-usb.git which itself is first written by Neo Jou. Signed-off-by: neo_jou <neo_jou@realtek.com> Signed-off-by: Hans Ulli Kroll <linux@ulli-kroll.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221202081224.2779981-8-s.hauer@pengutronix.de
2022-12-08wifi: rtw88: Drop coex mutexSascha Hauer
coex->mutex is used in rtw_coex_info_request() only. Most callers of this function hold rtwdev->mutex already, except for one callsite in the debugfs code. The debugfs code alone doesn't justify the extra lock, so acquire rtwdev->mutex there as well and drop the now unnecessary spinlock. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221202081224.2779981-6-s.hauer@pengutronix.de
2022-12-08wifi: rtw88: Drop h2c.lockSascha Hauer
The h2c.lock spinlock is used in rtw_fw_send_h2c_command() and rtw_fw_send_h2c_packet(). Most callers call this with rtwdev->mutex held, except from one callsite in the debugfs code. The debugfs code alone doesn't justify the extra lock, so acquire rtwdev->mutex in debugfs and drop the now unnecessary spinlock. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221202081224.2779981-5-s.hauer@pengutronix.de
2022-12-08wifi: rtw88: Drop rf_lockSascha Hauer
The rtwdev->rf_lock spinlock protects the rf register accesses in rtw_read_rf() and rtw_write_rf(). Most callers of these functions hold rtwdev->mutex already with the exception of the callsites in the debugfs code. The debugfs code doesn't justify an extra lock, so acquire the mutex there as well before calling rf register accessors and drop the now unnecessary spinlock. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221202081224.2779981-4-s.hauer@pengutronix.de
generated by cgit (git 2.34.1) at 2025-07-25 15:19:41 +0000