summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtw89/reg.h
AgeCommit message (Collapse)Author
2025-03-31wifi: rtw89: 8852c: support different SAR configs by antennaZong-Zhe Yang
Set SAR configs to the corresponding CRs (control registers) according to RF path. Then, declare to support SAR by antenna in chip info. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250326020643.14487-12-pkshih@realtek.com
2025-03-31wifi: rtw89: 8922a: support different SAR configs by antennaZong-Zhe Yang
Set SAR configs to the corresponding CRs (control registers) according to RF path. Then, declare to support SAR by antenna in chip info. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250326020643.14487-11-pkshih@realtek.com
2025-03-31wifi: rtw89: phy: reset value of force TX power for MAC IDPing-Ke Shih
The force TX power function is disabled, but the force TX power value is preserved, causing misunderstand the behavior in debug. Clear all values. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250325031021.15619-1-pkshih@realtek.com
2025-03-13wifi: rtw89: set force HE TB mode when connecting to 11ax APDian-Syuan Yang
Some of 11ax AP set the UL HE-SIG-A2 reserved subfield to all 0s, which will cause the 11be chip to recognize trigger frame as EHT. We propose a method to bypass the "UL HE-SIG-A2 reserved subfield" and always uses HE TB in response to the AP's trigger frame. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250306021144.12854-6-pkshih@realtek.com
2025-03-13wifi: rtw89: 8922a: enable dynamic antenna gainKuan-Chung Chen
The 8922A now supports dynamic antenna gain. However, in firmware before v0.35.64.0, different transmit powers cannot be applied to each RF path. To comply with regulatory limits in these older firmware, the lower of the two requested transmit powers will be used for both paths when they differ. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250306021144.12854-5-pkshih@realtek.com
2025-02-21wifi: rtw89: mac: define registers of agg_limit and txcnt_limit to share ↵Ping-Ke Shih
common flow The agg_limit and txcnt_limit are used by BT-coexistence to reduce WiFi TX time at once to share time with Bluetooth devices. Since these registers address are different from WiFi 6 and 7 chips, define them accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217063053.38936-2-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: support EDCCA log per PHYPing-Ke Shih
The registers of EDCCA log for PHY 1 isn't a simple offset, so define them accordingly. Then the function use register set to access reports according to phy_idx. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-8-pkshih@realtek.com
2024-12-05wifi: rtw89: 8922a: use RSSI from PHY report in RX descriptorChih-Kang Chang
The PPDU status of probe response will fail to parse the IE due to being filtered by the to_self check. Therefore, we parse RSSI from PHY report in RX descriptor. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241128055433.11851-5-pkshih@realtek.com
2024-11-06wifi: rtw89: fw: set recorded IDMEM share mode in firmware header to registerPing-Ke Shih
For WiFi 6 chips, firmware secure boot will run on a IDMEM mode specified in firmware header. Retrieve the mode from firmware, and set to registers accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241030022135.11688-6-pkshih@realtek.com
2024-08-22wifi: rtw89: limit the PPDU length for VHT rate to 0x40000Chia-Yuan Li
If the PPDU length for VHT rate exceeds 0x40000, calculating the PSDU length will overflow. TMAC will determine the length to be too small and as a result, all packets will be sent as ZLD (Zero Length Delimiter). Fixes: 5f7e92c59b8e ("wifi: rtw89: 8852b: set AMSDU limit to 5000") Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240815134054.44649-1-pkshih@realtek.com
2024-08-16wifi: rtw89: 8922a: add digital compensation to avoid TX EVM degradeKuan-Chung Chen
TX EVM will significantly decrease for long packets when the TX idle time increases. Introduce digital compensation based on TX idle time, to mitigate TX EVM degradation, and TX throughput improved from 1871 to 1947 Mbps. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240809072012.84152-3-pkshih@realtek.com
2024-08-02wifi: rtw89: add support for hardware rfkillKuan-Chung Chen
Add support for ieee80211::rfkill_poll ops. This enables periodic monitoring of the hardware rfkill state, triggering updates when the status changes. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240724052626.12774-3-pkshih@realtek.com
2024-07-31wifi: rtw89: 8852bt: add chip_info of RTL8852BTPing-Ke Shih
Add chip_info of RTL8852BT accordingly, including firmware elements support, MAC memory quota (WDE, PLE and etc), SER IMR used by firmware, BTC registers, register based H2C/C2H, WoWLAN stub. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240720021340.12102-4-pkshih@realtek.com
2024-07-02wifi: rtw89: 8852bt: rfk: add DACKPing-Ke Shih
DACK (digital-to-analog converters calibration) is used to calibrate DAC to output signals as expected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240627025849.25198-4-pkshih@realtek.com
2024-07-02wifi: rtw89: 8852bt: rfk: add IQKPing-Ke Shih
IQ signal calibration is a very important calibration to yield good RF performance. We do this calibration once we are going to an AP. During scanning phase, without this calibration RF performance is still acceptable because it transmits and receives with low data rate at this phase. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240627025849.25198-2-pkshih@realtek.com
2024-06-27wifi: rtw89: 8852bt: rfk: add DPKPing-Ke Shih
DPK is short for digital pre-distortion calibration. It can adjusts digital waveform according to PA linear characteristics dynamically to enhance TX EVM for high power. Do this calibration when we are going to run on AP channel. To prevent power offset out of boundary, it monitors thermal and set proper boundary to register. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240621073458.55187-3-pkshih@realtek.com
2024-06-27wifi: rtw89: 8852bt: rfk: add TSSIPing-Ke Shih
TSSI is transmitter signal strength indication, which is a close-loop hardware circuit to feedback actual transmitting power as a reference for next transmission. It does full calibration when we are going to connect an AP. When switching bands or channels for scanning or some reasons, reset hardware status to prevent use wrong power value feedback from previous transmission. It also loads tables of compensation values reflecting current temperature into registers according to channel and band group to transmit packets with expected power. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240621073458.55187-2-pkshih@realtek.com
2024-06-27wifi: rtw89: add polling for LPS H2C to ensure FW receivedChih-Kang Chang
We add polling after sending LPS H2C to ensure that the Firmware is received and executes RPWM thereafter. Otherwise, if the Firmware executes RPWM without receiving LPS H2C, it will cause beacon loss in WoWLAN mode due to the inability to obtain channel and bandwidth information from H2C. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240620055825.17592-8-pkshih@realtek.com
2024-06-27wifi: rtw89: wow: update config mac for 802.11ax chipChih-Kang Chang
The 802.11ax chip also needs rtw89_mac_cpu_io_rx(), which notifies Firmware to start or stop WoWLAN and waits until Firmware process over. Then, the driver can continue processing to avoid unexpected behavior. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240620055825.17592-4-pkshih@realtek.com
2024-06-27wifi: rtw89: wow: update WoWLAN reason register for different FWChih-Kang Chang
Need to update WoWLAN wakeup reason register after firmware version 0.35.22.0 for RTL8922A, and 0.27.80.0 for RTL8852CE. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240620055825.17592-3-pkshih@realtek.com
2024-06-17wifi: rtw89: 885xbx: apply common settings to 8851B, 8852B and 8852BTPing-Ke Shih
Many common settings can share to 8851B, 8852B and 8852BT, so add an inline function rtw89_is_rtl885xb() to be concise. Meanwhile review and align settings for existing chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240607070659.80263-4-pkshih@realtek.com
2024-06-17wifi: rtw89: 8852bx: add extra handles for 8852BT in 8852b_commonPing-Ke Shih
The channel configuration of 8852BT is very similar but a little different to 8852B, so use chip ID as condition to add extra handles including external loss compensation, ADC configurations, spur settings and so on. Don't affect existing 8852BE. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240607070659.80263-3-pkshih@realtek.com
2024-04-29wifi: rtw89: 8852b: update hardware parameters for RFE type 5Ping-Ke Shih
RFE type 5 of 8852B is a type of hardware module, which can use different external components, so update register settings accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240423121247.24714-2-pkshih@realtek.com
2024-04-04wifi: rtw89: 8922a: configure UL MU/OFDMA power settingKuan-Chung Chen
8922A needs to set UL MU/OFDMA power and fine tune power error tolerance for proper response to AP's trigger frame. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240401063818.12880-1-pkshih@realtek.com
2024-03-26wifi: rtw89: disable txptctrl IMR to avoid flase alarmChia-Yuan Li
The hardware command parser of txptctrl (TX protocol control) has overly stringent timeout conditions, which results in false alarm. So disable it. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240321025603.20614-1-pkshih@realtek.com
2024-03-05wifi: rtw89: update suspend/resume for different generationChin-Yen Lee
The setting during suspend or resume is different between different generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-6-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update config mac function with different generationChin-Yen Lee
The registers to configure mac function for WoWLAN mode that are different from different generation, so update them. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-5-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update WoWLAN status register for different generationChin-Yen Lee
The statue register is for driver to check if WoWLAN mode works or stops successfully. It is changed for new generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-3-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add init_info H2C command format version 7Ching-Te Ku
To avoid using bit fields for H2C command, rearrange the structure. And also patch the corresponding code for the using of this structure. No logic changes for existing chips. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-4-pkshih@realtek.com
2024-03-05wifi: rtw89: 8922a: add coexistence helpers of SW grantPing-Ke Shih
Under some circumstances, coexistence mechanism want to keep grant BT or WiFi, such as inquiry and WiFi is connecting, to ensure BT or WiFi can transmit or receive data in that period. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-3-pkshih@realtek.com
2024-03-05wifi: rtw89: mac: add coexistence helpers {cfg/get}_pltPing-Ke Shih
When hardware grant BT initially but transition to grant WiFi, the PLT (polluted) bit is set to assist coexistence mechanism to debug if grant signal is expected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-2-pkshih@realtek.com
2024-02-19wifi: rtw89: 8922a: add set_channel RF partPing-Ke Shih
Configure RF registers according to band, channel, bandwidth. Since this chip will support MLO, it needs check the operating mode to decide paths we are going to configure. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240215055741.14148-4-pkshih@realtek.com
2024-02-19wifi: rtw89: 8922a: add set_channel BB partPing-Ke Shih
In additional to configure band, channel and bandwidth registers, it also configure CCK support on 2GHZ band, spur elimination, and RX gain. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240215055741.14148-3-pkshih@realtek.com
2024-02-19wifi: rtw89: 8922a: add set_channel MAC partPing-Ke Shih
To set channel, add a function to get TXSB (TX subband) that is hardware index to indicate primary channel. Then, configure band, channel, bandwidth and TXSB via registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240215055741.14148-2-pkshih@realtek.com
2024-02-12wifi: rtw89: 8922a: implement AP mode related reg for BE generationChih-Kang Chang
Modify reg for BE generation when AP stop, otherwise have warning messages "Polling beacon packet empty fail". Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-10-pkshih@realtek.com
2024-02-12wifi: rtw89: 8922a: correct register definition and merge IO for ↵Ping-Ke Shih
ctrl_nbtg_bt_tx() ctrl_nbtg_bt_tx is used to control AGC settings under non-shared path condition, which is affected by BT TX. To speed up IO, merge continual bit mask into one IO. Also, correct a register definition. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-9-pkshih@realtek.com
2024-02-12wifi: rtw89: use PLCP information to match BSS_COLOR and AIDPing-Ke Shih
Hardware can use spatial reuse to reduce interference in OBSS environment, and originally use MAC header to match BSS color and AID. Change to use PLCP to match them earlier to prevent margin timing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-7-pkshih@realtek.com
2024-02-12wifi: rtw89: mac: return held quota of DLE when changing MAC-1Ping-Ke Shih
DLE (data link engine) could hold quota when we are going to enable/disable MAC-1 block, so trigger hardware to return all held quota. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-4-pkshih@realtek.com
2024-02-06wifi: rtw89: 8922a: add chip_ops::rfk_hw_initPing-Ke Shih
Add a chip_ops for WiFi 7 chips to set additional RF configurations including MLO and PLL settings. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240202030642.108385-12-pkshih@realtek.com
2024-02-06wifi: rtw89: rfk: send channel information to firmware for RF calibrationsPing-Ke Shih
We are going to do RF calibrations in firmware, so driver needs to provide channel information for calibrations, which can do the same things as they did in driver. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240202030642.108385-3-pkshih@realtek.com
2024-02-01wifi: rtw89: update ps_state register for chips with different generationChin-Yen Lee
The ps_state register is used for driver to check if the WiFi chip leave power save mode successfully. The register is changed for new generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-7-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: add chip_ops to get thermal valuePing-Ke Shih
Get thermal value as a clue to do RF calibration if the delta is larger than a threshold, but 8922A doesn't need this, so we only read out the value when debugging to reduce IO. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033802.12508-1-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: add RF read/write v2Ping-Ke Shih
Implement indirect interface v2 to read/write RF registers via PHY registers for 8922A. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033637.12330-5-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: add chip_ops::cfg_txrx_pathPing-Ke Shih
This function is to set TX/RX path. Especially for 1SS rate, it can select to TX on one or two antenna. Before this operation, stop hardware to prevent transmitting/receiving unexpected packets. After that, restore settings and reset hardware to prevent it stays on abnormal state. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033637.12330-4-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: implement {stop,resume}_sch_tx and cfg_ppduPing-Ke Shih
To set TX/RX path or set channel, we need these helpers to stop TX and restore settings. The sch_tx stands for scheduler TX channel, and the cfg_ppdu is to stop reporting PPDU status, so we should stop them during setting. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033637.12330-3-pkshih@realtek.com
2024-02-01wifi: rtw89: pci: update SER timer unit and timeout timePing-Ke Shih
Be higher resolution of SER timer unit from 32ms to 16ms to detect abnormal situation more accurately, and set hardware watchdog timer to 4ms. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240121071826.10159-2-pkshih@realtek.com
2024-01-23wifi: rtw89: 8922a: add BTG functions to assist BT coexistence to control TX/RXChung-Hsuan Hung
These functions are to control baseband AGC while BT coexists with WiFi. Among these functions, ctrl_btg_bt_rx is used to control AGC related settings, which is affected by BT RX, while BT shares the same path with WiFi; ctrl_nbtg_bt_tx is used to control AGC settings under non-shared path condition, which is affected by BT TX. Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240120003831.7014-7-pkshih@realtek.com
2024-01-23wifi: rtw89: 8922a: add TX power related opsPing-Ke Shih
The ::power_trim is to write bias value programmed in efuse to normalize TX power, and then using ::set_txpwr_ctrl to set reference TX power value. The ::set_txpwr is to set final TX power according to regulation of current country. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240120003831.7014-6-pkshih@realtek.com
2024-01-23wifi: rtw89: 8922a: add register definitions of H2C, C2H, page, RRSR and EDCCAPing-Ke Shih
Firmware H2C commands and C2H events can go via registers, so define them accordingly. The page registers are to arrange local buffer of WiFi chip. RRSR is to define rate selection to transmit BA or ACK. EDCCA is to set threshold of engine detection mechanism by BB hardware. Like other chips, define these registers and we can share the same flow. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240120003831.7014-5-pkshih@realtek.com
2024-01-23wifi: rtw89: 8922a: add chip_ops related to BB initPing-Ke Shih
The chip_ops::bb_preinit and ::bb_postinit are called before and after loading BB parameters from tables of firmware file. The ::bb_reset is used to reset hardware state, and currently it is not needed by 8922AE so leave it as empty. The ::bb_sethw is to implement conditional parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240120003831.7014-4-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-07-31 01:55:23 +0000