summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtw89/ser.c
AgeCommit message (Collapse)Author
2025-05-16wifi: rtw89: mcc: deal with non-periodic NoAZong-Zhe Yang
Originally, MCC just took periodic NoA into account. When the connected GO announces non-periodic NoA and GC side is during MCC, sometimes GC cannot receive beacons well if the MCC scheduling conflicts with the non-periodic NoA planning. After the loss exceeds the tolerable amount, beacon filter will report connection loss. However, in this case, the loss is acceptable. So now, MCC will calculate the range of non-periodic NoA. And then, don't care beacon loss during the range. Besides, rtw89_mcc_fill_role_limit() only makes sense for GC. Remove the redundant check of GO. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250511035217.10410-6-pkshih@realtek.com
2025-04-28wifi: rtw89: don't re-randomize TSF of AP/GOZong-Zhe Yang
When APs or GOs are up, their TSF start point are randomized to avoid collisions. However, the TSF of an existing AP/GO would be randomized multiple times. It caused the TSF is discontinuous to the corresponding STA/GC sides. So, once TSF has been randomized, don't re-randomize it unless SER (system error recovery) happens unfortunately. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250422014620.18421-7-pkshih@realtek.com
2025-02-03wifi: rtw89: manual cosmetic along lockdep_assert_wiphy()Ping-Ke Shih
With spatch script, already remove most driver mutex and generate lockdep_assert_wiphy(), and some are needed to refine manually further to be expected: - lockdep_assert_wiphy() always be the first statement in function - return directly rather than unnecessary goto - change assert from mutex to wiphy lock, which script can't convert automatically. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-9-pkshih@realtek.com
2025-02-03wifi: rtw89: remove consumers of driver mutexPing-Ke Shih
All need lock have taken both driver mutex and wiphy lock, so we can remove driver mutex safely by below spatch script. Also, check every lockdep_assert_wiphy() is executed without locks warning at runtime. @ rule1_1 @ @@ - lockdep_assert_held(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); @ rule1_2 @ @@ - guard(mutex)(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); @ rule2_1 @ @@ - mutex_lock(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); ... - mutex_unlock(&rtwdev->mutex); @ rule2_2 @ @@ - mutex_unlock(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); ... - mutex_lock(&rtwdev->mutex); @ rule3_1 @ type t; identifier fn; @@ t fn(struct wiphy *wiphy, ...) { ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(wiphy); ... } @ rule3_1_1 @ type t; identifier fn; @@ t fn(...) { ... struct wiphy *wiphy = ...; ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(wiphy); ... } @ rule3_2 @ type t; identifier fn; @@ t fn(struct ieee80211_hw *hw, ...) { ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(hw->wiphy); ... } @ rule3_2_1 @ type t; identifier fn; @@ t fn(...) { ... struct ieee80211_hw *hw = ...; ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(hw->wiphy); ... } The compiler warnings will be fixed manually by latter patch: rtw89/mac80211.c:371:1: warning: statement expected after label Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-8-pkshih@realtek.com
2025-02-03wifi: rtw89: use wiphy_work() to replace ieee802111_work()Ping-Ke Shih
For certain works protected by driver mutex, use wiphy_work() directly to have wiphy lock held naturally. Then every this kind of works is protected by both wiphy lock and driver mutex. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-3-pkshih@realtek.com
2025-02-03wifi: rtw89: add wiphy_lock() to work that isn't held wiphy_lock() yetPing-Ke Shih
To ensure where are protected by driver mutex can also be protected by wiphy_lock(), so afterward we can remove driver mutex safely. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-2-pkshih@realtek.com
2024-11-27wifi: rtw89: 8922a: configure AP_LINK_PS if FW supportsZong-Zhe Yang
After FW v0.35.46.0, for AP mode, RTL8922A FW supports a new FW feature, called NOTIFY_AP_INFO, to notify driver information related to AP mode. And, one function of it is to monitor PS states of remote stations. Once one of them changes, FW will send a C2H event to tell driver. With this FW feature, we can declare AP_LINK_PS. For now, driver still needs to determine if a frame is ps-poll or U-APSD trigger. So, add the corresponding RX handling in driver, which activates only when at least one AP is running. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241120034054.13575-2-pkshih@realtek.com
2024-09-24wifi: rtw89: tweak driver architecture for impending MLO supportZong-Zhe Yang
The drv_priv hooked to mac80211 become as below. (drv_priv) (instance-0) +---------------+ +-----------+ +----------------+ | ieee80211_vif | <---> | rtw89_vif | -------> | rtw89_vif_link | +---------------+ +-----------+ | +----------------+ | | (instance-1) | +----------------+ +---> | rtw89_vif_link | +----------------+ (drv_priv) (instance-0) +---------------+ +-----------+ +----------------+ | ieee80211_sta | <---> | rtw89_sta | -------> | rtw89_sta_link | +---------------+ +-----------+ | +----------------+ | | (instance-1) | +----------------+ +---> | rtw89_sta_link | +----------------+ The relation bewteen mac80211 link_id and our link instance is like below. |\ (link_id) | \ 0 -------- | | 1 -------- | | ------ instance-0 (link_id: X) -> work on HW band 0 2 -------- | | ... | | ------ instance-1 (link_id: Y) -> work on HW band 1 14 -------- | | | / |/ N.B. For cases of non-MLD connection, we set our link instance-0 active with link_id 0. So, our code flow can be compatible between non-MLD connection and MLD connection. Based on above, we tweak entire driver architecture first. But, we don't dynamically enable multiple links here. That will be handled separately. Most of the things changed here are changing flows to iterate all active links and read bss_conf/link_sta data according to target link. And, for cases of scan, ROC, WOW, we use instance-0 to deal with the request. There are some things listed below, which work for now but need to extend before multiple active links. 1. tx path select suitable link instance among multiple active links 2. rx path determine rx link by PPDU instead of always link instance-0 3. CAM apply MLD pairwise key to any active links dynamically Besides, PS code cannot easily work along with tweaking architecture. With supporting MLO flag (currently false), we disable PS first and will fix it by another commit in the following. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240916053158.47350-8-pkshih@realtek.com
2024-09-24wifi: rtw89: rename rtw89_sta to rtw89_sta_link ahead for MLOZong-Zhe Yang
This is an intermediate version that is separated from subsequent major MLO changes, so some functions' namings are not really determined here. e.g. struct rtw89_sta_link *sta_to_rtwsta_safe(struct ieee80211_sta *sta) No logic is changed. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240916053158.47350-3-pkshih@realtek.com
2024-09-24wifi: rtw89: rename rtw89_vif to rtw89_vif_link ahead for MLOZong-Zhe Yang
This is an intermediate version that is separated from subsequent major MLO changes, so some functions' namings are not really determined here. e.g. struct rtw89_vif_link *vif_to_rtwvif_safe(struct ieee80211_vif *vif) No logic is changed. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240916053158.47350-2-pkshih@realtek.com
2024-05-14wifi: rtw89: ser: avoid multiple deinit on same CAMZong-Zhe Yang
We did deinit CAM in STA iteration in VIF loop. But, the STA iteration missed to restrict the target VIF. So, if there are multiple VIFs, we would deinit a CAM multiple times. Now, fix it. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240509090646.35304-2-pkshih@realtek.com
2023-12-07wifi: rtw89: 8922a: configure CRASH_TRIGGER FW featureZong-Zhe Yang
RTL8922A FW supports CRASH_TRIGGER feature from v0.34.30.0. After it, debugfs fw_crash can accept type 1 on RTL8922A to trigger firmware crash and verify L2 recovery. Besides, RTL8922A sync address offset of reserved payload engine. And, SER (system error recovery) tweaks conversion from WCPU address to indirect access address for RTL8922A. The new conversion works for all supported chips. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231204080751.15354-2-pkshih@realtek.com
2023-11-14wifi: rtw89: pci: stop/start DMA for level 1 recovery according to chip genZong-Zhe Yang
Level 1 recovery is to recover TX/RX rings, so it needs PCI to stop/start DMA. But, different chip gen have different implementations, either register address/mask or function flow. So, configure callback of stop/start DMA by chip gen. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-3-pkshih@realtek.com
2023-08-25wifi: rtw89: mac: generalize code to indirectly access WiFi internal memoryPing-Ke Shih
To diagnose abnormal behavior, we need to dump certain internal memory. For example, dump security CAM when debugging encryption/decryption problems, or dump BA CAM when debugging abnormal BlockAck. Since the indirect address and internal memory base address are different between WiFi 6 and 7 chips, add fields to reuse codes. Also, only WiFi 6 chips initialize DMAC and CMAC tables via this indirect interface, so no need to change the constant register address, and new firmware will help to initialize these tables. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230822125822.23817-3-pkshih@realtek.com
2023-05-25wifi: rtw89: tweak H2C TX waiting function for SERZong-Zhe Yang
Some specific H2C (host to chip command) needs waiting until FW ACK by C2H (chip to host event). However, during SER (system error recovery), most interrupts are disabled, so we can't receive C2H immediately. It causes this kind of H2C TX waits will always time out during SER. To save time spent by SER, we don't do these redundant waits. And, to make a difference from -ETIMEDOUT in other cases, we make the function return 1 for SER case. When some H2C callers really catch `ret == 1` at runtime, they can determine whether it's reasonable or not, and consider how to resolve their flow if needed. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230516082441.11154-3-pkshih@realtek.com
2023-05-25wifi: rtw89: ser: reset total_sta_assoc and tdls_peer when L2Zong-Zhe Yang
The total_sta_assoc and the tdls_peer are used for statistics accodring to stations' information. L2 (Level 2) SER (system error recovery) will call ieee80211_restart_hw() which re-invokes sta_state ops. And then, the total_sta_assoc and tdls_peer will be re-increased. In case wrong statistics results, we reset them in SER L2 handling. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230516082441.11154-2-pkshih@realtek.com
2023-05-11wifi: rtw89: ser: L1 add pre-M0 and post-M0 statesZong-Zhe Yang
Newer FW re-design SER (syetem error recovery) L1 (level 1) flow. New L1 flow will expect two extra states before original L1 flow. * Before: fw --- M1 --> driver fw <-- M2 --- driver fw --- M3 --> driver fw <-- M4 --- driver fw --- M5 --> driver * After: fw --- pre-M0 --> driver fw <-- post-M0 --- driver fw --- M1 --> driver fw <-- M2 --- driver fw --- M3 --> driver fw <-- M4 --- driver fw --- M5 --> driver Then before M1, FW gets one more interval to deal with things that FW should have handled well. To consider backward/forward compatibility, FW and driver won't change flow from M1 to M5. (only except that halt trigger control will change a little bit.) So, there will be two differnt starting points of SER L1. * old FW: SER L1 starts from M1 * new FW: SER L1 starts from pre-M0 Then, driver adds the new SER L1 entry and also keep the original one instead of changing it. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230508084335.42953-3-pkshih@realtek.com
2023-03-06wifi: rtw89: fix SER L1 might stop entering LPS issueChih-Kang Chang
When SER L1 triggered, driver need to stop Rx and clear RTW89_FLAG_RUNNING flag. If track_work check RTW89_FLAG_RUNNING simultaneously, it will check failed and never queue track_work again, and LPS won't enter either. Therefore, we cancel delayed work when enter SER L1, and queue delayed work when leave SER L1. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230224082117.21241-1-pkshih@realtek.com
2023-02-13wifi: rtw89: refine packet offload flowChin-Yen Lee
For upcoming firmware, driver needs to do packet offload to firmware to ensure LPS protocol work properly, so we update current connection and disconnect flow to maintain packet offload flow, and integrate with current WoWLAN flow which also needs packet offload. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-3-pkshih@realtek.com
2022-09-19wifi: rtw89: support SER L1 simulationZong-Zhe Yang
SER (system error recovery) can deal with different crash types by different levels of processes. Previous FW crash simulation triggers a CPU exception which is one kind of SER L2 type. It can verify SER L2 flow which includes HW/FW restart. Now, we want to increase crash simulation types. A debug function is added to trigger control error in purpose for SER L1 simulation/verification. And, debugfs fw_crash is extended to accept different parameters. echo 1 > fw_crash: simulate CPU exception as before (keep 1 for compatibility with previous) It will be catched and handled by SER L2. (this requires HW/FW restart) echo 2 > fw_crash: simulate control error It will be catched and handled by SER L1. (driver and FW cooperate to recover this) Besides, in order to apply to the above two cases, rename RTW89_FLAG_RESTART_TRIGGER to RTW89_FLAG_CRASH_SIMULATING and adjust where SER flow clears this bit for both L1 and L2. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220914035034.14521-5-pkshih@realtek.com
2022-09-19wifi: rtw89: 8852c: support fw crash simulationZong-Zhe Yang
With FW >= v0.27.40.0, 8852C FW has feature to handle crash simulation. Besides, use RTW89_WCPU_BASE_MASK to replace use of RTW89_WCPU_BASE_ADDR and work for both 8852A and 8852C. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220914035034.14521-4-pkshih@realtek.com
2022-09-02wifi: rtw89: correct BA CAM allocationPing-Ke Shih
BA CAM entries are global resource of hardware, so move the bitmap and instances to rtw89_cam_info, and then use link list from rtw89_sta to these instances. To check the allocation, add ba_cam to debugfs: map: mac_id: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 addr_cam: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bssid_cam: 01 00 00 00 00 00 00 00 sec_cam: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ba_cam: 03 00 00 00 00 00 00 00 VIF [0] 94:08:53:8e:ef:21 bssid_cam_idx=0 addr_cam_idx=0 -> bssid_cam_idx=0 sec_cam_bitmap=00 00 00 00 00 00 00 00 STA [0] 38:78:62:8b:cb:c6 addr_cam_idx=0 -> bssid_cam_idx=0 sec_cam_bitmap=00 00 00 00 00 00 00 00 ba_cam tid[6]=0, tid[1]=1 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220816013247.6243-4-pkshih@realtek.com
2022-09-02rtw89: ser: leave lps with mutexZong-Zhe Yang
Calling rtw89_leave_lps() should hold rtwdev::mutex. So, fix it. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220704023453.19935-5-pkshih@realtek.com
2022-09-02wifi: rtw89: initialize entity and configure default chandefZong-Zhe Yang
While idle, we need a default chandef to set channel for things, such as scan. Before support of mac80211 chanctx, mac80211 would configure a default one on ieee80211_hw::conf::chandef. And we just queried it whenever we did set channel. However, after support of mac80211 chanctx, the flow won't work like before. Besides, we don't now query chandef from ieee80211_hw::conf::chandef either. So, similar to mac80211 without using chanctx, we configure the default chandef with ieee80211_channel of index 0 in 2GHz. Although we have not added the support of mac80211 chanctx here, this configuration should be compatible before that. So, we commit this ahead. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809104952.61355-10-pkshih@realtek.com
2022-06-21wifi: rtw89: allocate BSSID CAM per TDLS peerPing-Ke Shih
In STA mode, if peer is TDLS. Allocate a BSSID CAM entry with peer's address to match address properly, and then hardware can ACK peer's packets and receive packets to driver. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220610072610.27095-4-pkshih@realtek.com
2022-06-21wifi: rtw89: allocate address CAM and MAC ID to TDLS peerPing-Ke Shih
Normally, we only allocate an address CAM and single one MAC ID to AP in STA mode. To support TDLS, we handle TDLS peers like AP handles stations. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220610072610.27095-2-pkshih@realtek.com
2022-04-12rtw89: rtw89_ser: add const to struct state_ent and event_entJoe Perches
Change the struct and the uses to const to reduce data. $ size drivers/net/wireless/realtek/rtw89/ser.o* (x86-64 defconfig w/ rtw89) text data bss dec hex filename 3741 8 0 3749 ea5 drivers/net/wireless/realtek/rtw89/ser.o.new 3437 312 0 3749 ea5 drivers/net/wireless/realtek/rtw89/ser.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2fd88e6119f62b968477ef9781abb1832d399fd6.camel@perches.com
2022-04-12rtw89: ser: fix unannotated fall-throughZong-Zhe Yang
add `break` to fix warning of unannotated fall-through between switch labels. Fixes: 14f9f4790048 ("rtw89: ser: control hci interrupts on/off by state") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408001353.17188-2-pkshih@realtek.com
2022-04-06rtw89: support FW crash simulationZong-Zhe Yang
Originally, there is already a mechanism, SER (system error recover), to deal with HW/FW recovery. After FW v0.13.36.0, FW supports a H2C (host to chip) command to make a CPU exception. Then, SER is supposed to catch this FW crash and do L2 reset. This feature is a simulation to verify if flow of recovering from FW crash works. Usage of fw_crash debugfs is as the following. $ echo 1 > fw_crash // trigger FW crash and wait SER handling $ cat fw_crash // return 0 if restart has been done Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220314071250.40292-9-pkshih@realtek.com
2022-04-06rtw89: ser: dump fw backtrace while L2 resetZong-Zhe Yang
Read FW backtrace entry through FW reserved payload engine, and then add FW backtrace dump during SER (system error recover) L2 reset process. It contains a list of RA (return address) and SP (stack pointer) which gives us a chance to trace back the call stack of FW. Moreover, if core dump might have wrong content due to error during dumping, we won't invoke device core dump framework. For this case, rtw89_ser_cd_free() is added to free buffer by ourselves. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220314071250.40292-7-pkshih@realtek.com
2022-04-06rtw89: ser: dump memory for fw payload engine while L2 resetZong-Zhe Yang
When FW encounters exception or assertion, SER L2 reset process will start. It will dump some error information and re-download FW eventually. Since such errors are usually critical, we would like to keep more information about error to increase possibility of analysis and debugging FW. We first add FW payload engine (fw reserved playoad engine, fw_rsvd_ple) memory dump. FW will record things like CPU registers, backtrace entry, etc. in it for debugging. Moreover, device core dump framework is used and wrapped to collect kinds of dumps during SER L2 reset process. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220314071250.40292-6-pkshih@realtek.com
2022-04-06rtw89: ser: control hci interrupts on/off by stateZong-Zhe Yang
While SER (system error recover) is processing, it's supposed to mean something is under recovery. So, disable interrupts (excluding the one of halt which could be used during SER) to avoid unexpected behavior. And then, enable interrupts after SER is done. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220314071250.40292-5-pkshih@realtek.com
2022-04-06rtw89: mac: correct decision on error status by scenarioZong-Zhe Yang
The raw error code might combine error scenario and error status. But, the error scenario isn't parsed previously. It makes us mishandle cpu exception and assertion. Now, we correct the error status for them. Besides, a few uses of error status are refined. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220314071250.40292-4-pkshih@realtek.com
2022-04-06rtw89: ser: fix CAM leaks occurring in L2 resetZong-Zhe Yang
The CAM, meaning address CAM and bssid CAM here, will get leaks during SER (system error recover) L2 reset process and ieee80211_restart_hw() which is called by L2 reset process eventually. The normal flow would be like -> add interface (acquire 1) -> enter ips (release 1) -> leave ips (acquire 1) -> connection (occupy 1) <(A) 1 leak after L2 reset if non-sec connection> The ieee80211_restart_hw() flow (under connection) -> ieee80211 reconfig -> add interface (acquire 1) -> leave ips (acquire 1) -> connection (occupy (A) + 2) <(B) 1 more leak> Originally, CAM is released before HW restart only if connection is under security. Now, release CAM whatever connection it is to fix leak in (A). OTOH, check if CAM is already valid to avoid acquiring multiple times to fix (B). Besides, if AP mode, release address CAM of all stations before HW restart. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220314071250.40292-2-pkshih@realtek.com
2021-10-13rtw89: add Realtek 802.11ax driverPing-Ke Shih
This driver named rtw89, which is the next generation of rtw88, supports Realtek 8852AE 802.11ax 2x2 chip whose new features are OFDMA, DBCC, Spatial reuse, TWT and BSS coloring; now some of them aren't implemented though. The chip architecture is entirely different from the chips supported by rtw88 like RTL8822CE 802.11ac chip. First of all, register address ranges are totally redefined, so it's impossible to reuse register definition. To communicate with firmware, new H2C/C2H format is proposed. In order to have better utilization, TX DMA flow is changed to two stages DMA. To provide rich RX status information, additional RX PPDU packets are added. Since there are so many differences mentioned above, we decide to propose a new driver. It has many authors, they are listed in alphabetic order: Chin-Yen Lee <timlee@realtek.com> Ping-Ke Shih <pkshih@realtek.com> Po Hao Huang <phhuang@realtek.com> Tzu-En Huang <tehuang@realtek.com> Vincent Fann <vincent_fann@realtek.com> Yan-Hsuan Chuang <tony0620emma@gmail.com> Zong-Zhe Yang <kevin_yang@realtek.com> Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211008035627.19463-1-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-07-25 15:28:56 +0000