summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_inline.h
AgeCommit message (Collapse)Author
2024-07-10scsi: qla2xxx: Unable to act on RSCN for port onlineQuinn Tran
The device does not come online when the target port is online. There were multiple RSCNs indicating multiple devices were affected. Driver is in the process of finishing a fabric scan. A new RSCN (device up) arrived at the tail end of the last fabric scan. Driver mistakenly thinks the new RSCN is being taken care of by the previous fabric scan, where this notification is cleared and not acted on. The laser needs to be blinked again to get the device to show up. To prevent driver from accidentally clearing the RSCN notification, each RSCN is given a generation value. A fabric scan will scan for that generation(s). Any new RSCN arrive after the scan start will have a new generation value. This will trigger another scan to get latest data. The RSCN notification flag will be cleared when the scan is associate to that generation. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406210538.w875N70K-lkp@intel.com/ Fixes: bb2ca6b3f09a ("scsi: qla2xxx: Relogin during fabric disturbance") Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-05scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()Nilesh Javali
The following call trace was observed: localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092 localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291" localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1 localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022 localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core] localhost kernel: Call Trace: localhost kernel: dump_stack_lvl+0x57/0x7d localhost kernel: check_preemption_disabled+0xc8/0xd0 localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] Use raw_smp_processor_id() instead of smp_processor_id(). Also use queue_work() across the driver instead of queue_work_on() thus avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled. Cc: stable@vger.kernel.org Suggested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230831112146.32595-2-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: qla2xxx: Fix firmware resource trackingQuinn Tran
The storage was not draining I/Os and the work load was not spread out across different CPUs evenly. This led to firmware resource counters getting overrun on the busy CPU. This overrun prevented error recovery from happening in a timely manner. By switching the counter to atomic, it allows the count to be little more accurate to prevent the overrun. Cc: stable@vger.kernel.org Fixes: da7c21b72aa8 ("scsi: qla2xxx: Fix command flush during TMF") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230821130045.34850-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-30Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...
2023-06-14scsi: qla2xxx: Correct the index of arrayBikash Hazarika
Klocwork reported array 'port_dstate_str' of size 10 may use index value(s) 10..15. Add a fix to correct the index of array. Cc: stable@vger.kernel.org Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: qla2xxx: Fix NULL pointer dereference in target modeGleb Chesnokov
When target mode is enabled, the pci_irq_get_affinity() function may return a NULL value in qla_mapq_init_qp_cpu_map() due to the qla24xx_enable_msix() code that handles IRQ settings for target mode. This leads to a crash due to a NULL pointer dereference. This patch fixes the issue by adding a check for the NULL value returned by pci_irq_get_affinity() and introducing a 'cpu_mapped' boolean flag to the qla_qpair structure, ensuring that the qpair's CPU affinity is updated when it has not been mapped to a CPU. Fixes: 1d201c81d4cc ("scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called") Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev> Link: https://lore.kernel.org/r/56b416f2-4e0f-b6cf-d6d5-b7c372e3c6a2@scst.dev Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets calledShreyas Deodhar
In current I/O path, Tx and Rx may not be processed on same CPU. This may lead to thrashing and optimum performance may not be achieved. Pick qpair such that Tx and Rx are processed on same CPU. Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Fix exchange oversubscription for management commandsQuinn Tran
Add resource checking for management (non-I/O) commands. Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Fix exchange oversubscriptionQuinn Tran
In large environment, it is possible to experience command timeout and escalation of path recovery. Currently the driver does not track the number of exchanges/commands sent to FW. If there is a delay for commands at the head of the queue, then this will create back pressure for commands at the back of the queue. Check for exchange availability before command submission. Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-08scsi: qla2xxx: Fix set-but-not-used variable warningsBart Van Assche
Fix the following two compiler warnings: drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’: drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 171 | uint8_t bail; | ^~~~ drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’: drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 2023 | uint8_t bail; | ^~~~ Cc: Arun Easi <arun.easi@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Fixes: feafb7b1714c ("[SCSI] qla2xxx: Fix vport delete issues") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Implement ref count for SRBSaurav Kashyap
The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21 qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400. qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx] Obvious solution to this is to introduce a reference counter. One reference is taken for the normal code path (the 'good' case) and one for the timeout path. As we always race between the normal good case and the timeout/abort handler we need to serialize it. Also we cannot assume any order between the handlers. Since this is slow path we can use proper synchronization via locks. When we are able to cancel a timer (del_timer returns 1) we know there can't be any error handling in progress because the timeout handler hasn't expired yet, thus we can safely decrement the refcounter by one. If we are not able to cancel the timer, we know an abort handler is running. We have to make sure we call sp->done() in the abort handlers before calling kref_put(). Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Add N2N support for EDIFQuinn Tran
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will pause after PLOGI to allow app to authenticate. Once authentication completes, app will tell driver to do PRLI. Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Fix crash in PCIe error handlingQuinn Tran
BUG: unable to handle kernel NULL pointer dereference at (null) IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1715 Comm: kworker/0:2 Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5 Hardware name: HPE Superdome Flex/Superdome Flex, BIOS Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020 Workqueue: events aer_recover_work_func task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000 RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000 RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8 RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000 R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000 R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0 FS: 0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx] report_slot_reset+0x41/0x80 ? merge_result.part.4+0x30/0x30 pci_walk_bus+0x70/0x90 pcie_do_recovery+0x1db/0x2e0 aer_recover_work_func+0xc2/0xf0 process_one_work+0x14c/0x390 Disable board_disable logic where driver resources are freed while OS is in the process of recovering the adapter. Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-14Merge tag 'spdx-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are some SPDX-specific changes for 5.10-rc1. They include: - driver fixes to make spdxcheck.pl work properly - add GFDL licenses as "deprecated" but required due to some of our documentation using them - add Zlib license as "deprecated" but required because we have code with this license in the tree. - convert some drivers to have SPDX identifiers that previously didn't have them. All have been in linux-next for a very long time with no reported issues" * tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/spdxcheck.py: handle license identifiers in XML comments net/mlx5: IPsec: make spdxcheck.py happy LICENSES/deprecated: add Zlib license text LICENSE: add GFDL deprecated licenses net/qla3xxx: Convert to SPDX license identifiers net/qlge: Convert to SPDX license identifiers net/qlcnic: Convert to SPDX license identifiers scsi/qla2xxx: Convert to SPDX license identifiers scsi/qla4xxx: Convert to SPDX license identifiers
2020-09-22scsi: qla2xxx: Add IOCB resource trackingQuinn Tran
This patch tracks number of IOCB resources used in the I/O fast path. If the number of used IOCBs reach a high water limit, driver would return the I/O as busy and let upper layer retry. This prevents over subscription of IOCB resources where any future error recovery command is unable to cut through. Enable IOCB throttling by default. Link: https://lore.kernel.org/r/20200904045128.23631-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Honor status qualifier in FCP_RSP per specArun Easi
FCP-4 (referred FCP-4 rev-2b) identifies the earlier known "retry delay timer" field as "status qualifier", which is described in SAM-5 and later specs. This fix makes appropriate driver side modifications to honor the new definition. The SAM document referred was SAM-6 rev-5. Link: https://lore.kernel.org/r/20200904045128.23631-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi/qla2xxx: Convert to SPDX license identifiersThomas Gleixner
All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09scsi: qla2xxx: Warn if done() or free() are called on an already freed srbDaniel Wagner
Emit a warning when ->done or ->free are called on an already freed srb. There is a hidden use-after-free bug in the driver which corrupts the srb memory pool which originates from the cleanup callbacks. An extensive search didn't bring any lights on the real problem. The initial fix was to set both pointers to NULL and try to catch invalid accesses. But instead the memory corruption was gone and the driver didn't crash. Since not all calling places check for NULL pointer, add explicitly default handlers. With this we workaround the memory corruption and add a debug help. Link: https://lore.kernel.org/r/20200908081516.8561-2-dwagner@suse.de Reviewed-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-15scsi: Fix trivial spellingKieran Bingham
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Link: https://lore.kernel.org/r/20200609124610.3445662-7-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Fix endianness annotations in header filesBart Van Assche
Annotate members of FC protocol and firmware dump data structures as big endian. Annotate members of RISC control structures as little endian. Annotate mailbox registers as little endian. Annotate the mb[] arrays as CPU-endian because communication of the mb[] values with the hardware happens through the readw() and writew() functions. readw() converts from __le16 to u16 and writew() converts from u16 to __le16. Annotate 'handles' as CPU-endian because for the firmware these are opaque values. Link: https://lore.kernel.org/r/20200518211712.11395-15-bvanassche@acm.org CC: Hannes Reinecke <hare@suse.de> Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into ↵Bart Van Assche
lower case This was suggested by Daniel Wagner. Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Add a shadow variable to hold disc_state history of fcportShyam Sundar
This patch adds a shadow variable to hold disc_state history for the fcport and prints state transition when the logging is enabled. Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-08scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVMEMartin Wilck
Avoid an uninitialized value (0) for ha->fc4_type_priority being falsely interpreted as NVMe priority. Not strictly needed any more after the previous patch, but makes the fc4_type_priority handling more explicit. Link: https://lore.kernel.org/r/20191107224839.32417-3-martin.wilck@suse.com Tested-by: David Bond <dbond@suse.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-09scsi: qla2xxx: Dual FCP-NVMe target port supportMichael Hernandez
Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same WWN. The driver now offers a user option by way of NVRAM parameter to allow users to choose, on a per port basis, the kind of FC-4 type they would like to prioritize for login. Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.com Signed-off-by: Michael Hernandez <mhernandez@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Introduce the function qla2xxx_init_sp()Bart Van Assche
This patch does not change any functionality but makes the next patch easier to read. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Uninline qla2x00_init_timer()Bart Van Assche
Since qla2x00_init_timer() is not used for I/O commands there is no need to inline this function. Hence uninline this function. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Move qla2x00_is_reserved_id() from qla_inline.h into qla_init.cBart Van Assche
The previous patch moved all qla2x00_is_reserved_id() callers into qla_init.c. Hence also move the qla2x00_is_reserved_id() definition into qla_init.c. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Move qla2x00_clear_loop_id() from qla_inline.h into qla_init.cBart Van Assche
Since qla2x00_clear_loop_id() is not in the hot path, uninline it. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Move qla2x00_set_reserved_loop_ids() definitionBart Van Assche
Since qla2x00_set_reserved_loop_ids() only has a single caller, move it into the source file from where it is called. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Move qla2x00_set_fcport_state() from a .h into a .c fileBart Van Assche
The qla2x00_set_fcport_state() function is not in the hot path so move its definition from a .h into a .c file. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03scsi: qla2xxx: Set the qpair in SRB to NULL when SRB is releasedGiridhar Malavali
This patch sets QPair pointer to NULL to prevent abort command racing ahead of normal command completion handling during scsi_done call. Signed-off-by: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11scsi: qla2xxx: Add mode control for each physical portQuinn Tran
Add ability to allow each physical port to control operating mode. Current code forces all ports to behave in one mode (i.e. initiator, target or dual). This patch allows user to select the operating mode for each port. - Driver must be loaded in dual mode to allow resource allocation modprobe qla2xxx qlini_mode=dual - In addition user can make adjustment to exchange resources using following command echo 1024 > /sys/class/scsi_host/host<x>/ql2xiniexchg echo 1024 > /sys/class/scsi_host/host<x>/ql2xexchoffld - trigger mode change and new setting of ql2xexchoffld|ql2xiniexchg echo [<value>] > /sys/class/scsi_host/host<x>/qlini_mode where, value can be one of following - enabled - disabled - dual - exclusive Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11scsi: qla2xxx: Move {get|rel}_sp to base_qpair structQuinn Tran
Currently, qla2x00_[get_sp|rel_sp] routines does {get|release} of srb resource/srb_mempool directly from qla_hw_data. qla2x00_start_sp() is used to issue management commands through the default Request Q 0 & Response Q 0 or base_qpair. This patch moves access of these resources through base_qpair. Instead of having knowledge of specific Q number and lock to rsp/req queue, this change will key off the qpair that is assigned to the srb resource. This lays the ground work for other routines to see this resource through the qpair. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-08-02scsi: qla2xxx: Migrate NVME N2N handling into state machineQuinn Tran
This patch fixes regression introduced for the N2N support for FC-NVMe. For FC-NVMe with N2N connection, instead of FW initiating the Login, Driver starts Login process. This patch migrates that new process from a standalone path into existing session management state machine. With this state change now driver will not wait for pull NPort ID from FW. Fixes: edd05de197592 ("scsi: qla2xxx: Changes to support N2N logins") Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Prevent sysfs access when chip is downQuinn Tran
Prevent user from sending commands through sysfs while firmware is not running or reset is in progress. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: qla2xxx: Fix unintialized List head crashQuinn Tran
In case of IOCB Queue full or system where memory is low and driver receives large number of RSCN storm, the stale sp pointer can stay on gpnid_list resulting in page_fault. This patch fixes this issue by initializing the sp->elem list head and removing sp->elem before memory is freed. Following stack trace is seen 9 [ffff987b37d1bc60] page_fault at ffffffffad516768 [exception RIP: qla24xx_async_gpnid+496] 10 [ffff987b37d1bd10] qla24xx_async_gpnid at ffffffffc039866d [qla2xxx] 11 [ffff987b37d1bd80] qla2x00_do_work at ffffffffc036169c [qla2xxx] 12 [ffff987b37d1be38] qla2x00_do_dpc_all_vps at ffffffffc03adfed [qla2xxx] 13 [ffff987b37d1be78] qla2x00_do_dpc at ffffffffc036458a [qla2xxx] 14 [ffff987b37d1bec8] kthread at ffffffffacebae31 Fixes: 2d73ac6102d9 ("scsi: qla2xxx: Serialize GPNID for multiple RSCN") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: qla2xxx: remove irq save in qla2x00_poll()Sebastian Andrzej Siewior
In commit d2ba5675d899 ("[SCSI] qla2xxx: Disable local-interrupts while polling for RISC status.") added a local_irq_disable() before invoking the ->intr_handler callback. The function, which was used in this callback, did not disable interrupts while acquiring the spin_lock so a deadlock was possible and this change was one possible solution. The function in question was qla2300_intr_handler() and is using spin_lock_irqsave() since commit 43fac4d97a1a ("[SCSI] qla2xxx: Resolve a performance issue in interrupt"). I checked all other ->intr_handler callbacks and all of them use the irqsave variant so it is safe to remove the local_irq_save() block now. Cc: qla2xxx-upstream@qlogic.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09scsi: qla2xxx: Fix race condition between iocb timeout and initialisationBen Hutchings
qla2x00_init_timer() calls add_timer() on the iocb timeout timer, which means the timeout function pointer and any data that the function depends on must be initialised beforehand. Move this initialisation before each call to qla2x00_init_timer(). In some cases qla2x00_init_timer() initialises a completion structure needed by the timeout function, so move the call to add_timer() after that. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-12scsi: qla2xxx: Fix function argument descriptionsBart Van Assche
Bring the kernel-doc headers in sync with the function argument lists. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-03scsi: qla2xxx: Use IOCB path to submit Control VP MBX commandQuinn Tran
Use IOCB patch to submit Control VP MBX command to reduce bottle-neck for mbx interface. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-08scsi: qla2xxx: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: qla2xxx-upstream@qlogic.com Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Bart Van Assche <Bart.VanAssche@wdc.com>
2017-06-27scsi: qla2xxx: Add function call to qpair for door bellQuinn Tran
Add call back to door bell for qpair. This help reduce access to qla_hw_data structure, in order to reduce cach thrash. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27scsi: qla2xxx: Enable Target Multi QueueQuinn Tran
Enable Multi Queue for Target mode. At Initiator LUN scan time, each LUN is assign to a QPair. Each QPair is affinitize to certain CPU. When new cmd arrives from the wire, the lunid is used to search for qpair. The qpair's affinitized cpuid will be used to queue up the work element. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27scsi: qla2xxx: Combine Active command arrays.Quinn Tran
Merge active/outstanding cmd arrays from target side and initiator side together in prepration for Target Multi Queue support. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qla2xxx: Add ql2xiniexchg parameterQuinn Tran
Previously, the ql2xexchoffld module parameter was used to control the max number of exchanges to be offload onto host memory. Module parameter ql_dm_tgt_ex_pct was used to control the percentage of exchanges allocated to the Target side. With this patch, module parameter ql_dm_tgt_ex_pct is no longer used to control exchanges for the driver. New module parameter ql2xiniexchg is added to control exchanges between target mode and initiator mode. With the updated module parameters, users can control the exact number of exchanges for either Initiator or Target. The exchange offload feature will be automatically enabled when the total number of exchanges exceeds 2048 limit. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-24scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctxJoe Carnuccio
Fixes following signature in the stack trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000374 IP: [<ffffffffa06ec8eb>] qla2x00_sp_free_dma+0xeb/0x2a0 [qla2xxx] Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-09qla2xxx: Simplify usage of SRB structure in driverJoe Carnuccio
This patch simplifies SRB structure usage in driver. - Simplify sp->done() and sp->free() interfaces. - Remove sp->fcport->vha to use vha pointer from sp. - Use sp->vha context in qla2x00_rel_sp(). Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-09qla2xxx: Add framework for async fabric discoveryQuinn Tran
Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-12-14scsi: qla2xxx: Add multiple queue pair functionality.Michael Hernandez
Replaced existing multiple queue functionality with framework that allows for the creation of pairs of request and response queues, either at start of day or dynamically. Queue pair creation depend on module parameter "ql2xmqsupport", which need to be enabled to create queue pair. Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-07-25 20:49:58 +0000