summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_iocb.c
AgeCommit message (Collapse)Author
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-03-10scsi: qla2xxx: Fix double free of fcportSaurav Kashyap
The server was crashing after LOGO because fcport was getting freed twice. -----------[ cut here ]----------- kernel BUG at mm/slub.c:371! invalid opcode: 0000 1 SMP PTI CPU: 35 PID: 4610 Comm: bash Kdump: loaded Tainted: G OE --------- - - 4.18.0-425.3.1.el8.x86_64 #1 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 RIP: 0010:set_freepointer.part.57+0x0/0x10 RSP: 0018:ffffb07107027d90 EFLAGS: 00010246 RAX: ffff9cb7e3150000 RBX: ffff9cb7e332b9c0 RCX: ffff9cb7e3150400 RDX: 0000000000001f37 RSI: 0000000000000000 RDI: ffff9cb7c0005500 RBP: fffff693448c5400 R08: 0000000080000000 R09: 0000000000000009 R10: 0000000000000000 R11: 0000000000132af0 R12: ffff9cb7c0005500 R13: ffff9cb7e3150000 R14: ffffffffc06990e0 R15: ffff9cb7ea85ea58 FS: 00007ff6b79c2740(0000) GS:ffff9cb8f7ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b426b7d700 CR3: 0000000169c18002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: kfree+0x238/0x250 qla2x00_els_dcmd_sp_free+0x20/0x230 [qla2xxx] ? qla24xx_els_dcmd_iocb+0x607/0x690 [qla2xxx] qla2x00_issue_logo+0x28c/0x2a0 [qla2xxx] ? qla2x00_issue_logo+0x28c/0x2a0 [qla2xxx] ? kernfs_fop_write+0x11e/0x1a0 Remove one of the free calls and add check for valid fcport. Also use function qla2x00_free_fcport() instead of kfree(). Cc: stable@vger.kernel.org Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240227164127.36465-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: qla2xxx: Fix N2N stuck connectionQuinn Tran
Disk failed to rediscover after chip reset error injection. The chip reset happens at the time when a PLOGI is being sent. This causes a flag to be left on which blocks the retry. Clear the blocking flag. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240227164127.36465-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: qla2xxx: Prevent command send on chip resetQuinn Tran
Currently IOCBs are allowed to push through while chip reset could be in progress. During chip reset the outstanding_cmds array is cleared twice. Once when any command on this array is returned as failed and secondly when the array is initialize to zero. If a command is inserted on to the array between these intervals, then the command will be lost. Check for chip reset before sending IOCB. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240227164127.36465-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-30Merge branch '6.5/scsi-fixes' into 6.6/scsi-stagingMartin K. Petersen
Pull in the fixes tree for a commit that missed 6.5. Also resolve a trivial merge conflict in fnic. * 6.5/scsi-fixes: (36 commits) scsi: storvsc: Handle additional SRB status values scsi: snic: Fix double free in snic_tgt_create() scsi: core: raid_class: Remove raid_component_add() scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5 scsi: ufs: mcq: Fix the search/wrap around logic scsi: qedf: Fix firmware halt over suspend and resume scsi: qedi: Fix firmware halt over suspend and resume scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock scsi: lpfc: Remove reftag check in DIF paths scsi: ufs: renesas: Fix private allocation scsi: snic: Fix possible memory leak if device_add() fails scsi: core: Fix possible memory leak if device_add() fails scsi: core: Fix legacy /proc parsing buffer overflow scsi: 53c700: Check that command slot is not NULL scsi: fnic: Replace return codes in fnic_clean_pending_aborts() scsi: storvsc: Fix handling of virtual Fibre Channel timeouts scsi: pm80xx: Fix error return code in pm8001_pci_probe() scsi: zfcp: Defer fc_rport blocking until after ADISC response scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices scsi: sg: Fix checking return value of blk_get_queue() ... Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-25scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()Nilesh Javali
Sparse warning reported, drivers/scsi/qla2xxx/qla_iocb.c: In function 'qla24xx_build_scsi_type_6_iocbs': >> drivers/scsi/qla2xxx/qla_iocb.c:594:29: warning: variable 'ha' set but not used [-Wunused-but-set-variable] 594 | struct qla_hw_data *ha; | ^~ Remove unused variables 'vha' and 'ha'. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308230757.VKMIztAB-lkp@intel.com/ Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230825070017.46066-1-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMeManish Rangankar
Introduce infrastructure in the driver to support the processing of unsolicited LS (Link Service) requests. This will involve the utilization of a new pass-up of unsolicited FC-NVMe request IOCB interface. Unsolicited requests will be submitted to the NVMe transport layer through nvme_fc_rcv_ls_req(). Any received LS responses, which are sent using xmt_ls_rsp(), will be forwarded to the firmware through the existing Pass-Through IOCB interface, responsible for sending FC-NVMe Link Service requests and responses. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230821130045.34850-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: qla2xxx: Allow 32-byte CDBsQuinn Tran
System crashes when a 32-byte CDB was sent to a non T10 PI disk: [ 177.143279] ? qla2xxx_dif_start_scsi_mq+0xcd8/0xce0 [qla2xxx] [ 177.149165] ? internal_add_timer+0x42/0x70 [ 177.153372] qla2xxx_mqueuecommand+0x207/0x2b0 [qla2xxx] [ 177.158730] scsi_queue_rq+0x2b7/0xc00 [ 177.162501] blk_mq_dispatch_rq_list+0x3ea/0x7e0 Current code attempted to use CRC IOCB to send the command but failed. Instead, type 6 IOCB should be used to send the I/O. Clone existing type 6 IOCB code with addition of MQ support to allow 32-byte CDBs to go through. Signed-off-by: Quinn Tran <qutran@marvell.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230817063132.21900-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: qla2xxx: Move resource to allow code reuseQuinn Tran
dsd_list contains a list of dsd buffer resources allocated during traffic time. It resides in the qla_hw_data location where some of the code is not reusable. Move this list to qpair to allow reuse by either single queue or multi queue adapter / code. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230817063132.21900-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: qla2xxx: Fix command flush during TMFQuinn Tran
For each TMF request, driver iterates through each qpair and flushes commands associated to the TMF. At the end of the qpair flush, a Marker is used to complete the flush transaction. This process was repeated for each qpair. The multiple flush and marker for this TMF request seems to cause confusion for FW. Instead, 1 flush is sent to FW. Driver would wait for FW to go through all the I/Os on each qpair to be read then return. Driver then closes out the transaction with a Marker. Cc: stable@vger.kernel.org Fixes: d90171dd0da5 ("scsi: qla2xxx: Multi-que support for TMF") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: qla2xxx: Fix error code in qla2x00_start_sp()Dan Carpenter
This should be negative -EAGAIN instead of positive. The callers treat non-zero error codes the same so it doesn't really impact runtime beyond some trivial differences to debug output. Fixes: 80676d054e5a ("scsi: qla2xxx: Fix session cleanup hang") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/49866d28-4cfe-47b0-842b-78f110e61aab@moroto.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: qla2xxx: Silence a static checker warningDan Carpenter
Smatch and Clang both complain that LOGIN_TEMPLATE_SIZE is more than sizeof(ha->plogi_els_payld.fl_csp). Smatch warning: drivers/scsi/qla2xxx/qla_iocb.c:3075 qla24xx_els_dcmd2_iocb() warn: '&ha->plogi_els_payld.fl_csp' sometimes too small '16' size = 112 Clang warning: include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] __read_overflow2_field(q_size_field, size); When I was reading this code I assumed the "- 4" meant that we were skipping the last 4 bytes but actually it turned out that we are skipping the first four bytes. I have re-written it remove the magic numbers, be more clear and silence the static checker warnings. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/4aa0485e-766f-4b02-8d5d-c6781ea8f511@moroto.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Fix potential NULL pointer dereferenceBikash Hazarika
Klocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validate pointer before dereferencing the pointer. Cc: stable@vger.kernel.org Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: qla2xxx: Fix task management cmd failureQuinn Tran
Task management cmd failed with status 30h which means FW is not able to finish processing one task management before another task management for the same lun. Hence add wait for completion of marker to space it out. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304271802.uCZfwQC1-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com <mailto:himanshu.madhani@oracle.com>> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: qla2xxx: Multi-que support for TMFQuinn Tran
Add queue flush for task management command, before placing it on the wire. Do IO flush for all Request Q's. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304271702.GpIL391S-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com <mailto:himanshu.madhani@oracle.com>> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: edif: Fix performance dip due to lock contentionQuinn Tran
User experienced performance dip on measuring IOPS while EDIF enabled. During I/O time, driver uses dma_pool_zalloc() call to allocate a chunk of memory. This call contains a lock behind the scene which contribute to lock contention. Save the allocated memory for reuse and avoid the lock. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Remove dead code (GPNID)Quinn Tran
Remove stale unused code for GPNID. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Fix IOCB resource check warningNilesh Javali
Make qla_get_iocbs_resource() static to fix the warning: >> drivers/scsi/qla2xxx/qla_iocb.c:3820:5: warning: no previous prototype for >> 'qla_get_iocbs_resource' [-Wmissing-prototypes] 3820 | int qla_get_iocbs_resource(struct srb *sp) | ^~~~~~~~~~~~~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Fix exchange oversubscription for management commandsQuinn Tran
Add resource checking for management (non-I/O) commands. Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Fix exchange oversubscriptionQuinn Tran
In large environment, it is possible to experience command timeout and escalation of path recovery. Currently the driver does not track the number of exchanges/commands sent to FW. If there is a delay for commands at the head of the queue, then this will create back pressure for commands at the back of the queue. Check for exchange availability before command submission. Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: qla2xxx: edif: Fix no logout on delete for N2NQuinn Tran
The driver failed to send implicit logout on session delete. For edif, this failed to flush any lingering SA index in FW. Set a flag to turn on implicit logout early in the session recovery to make sure the logout will go out in case of error. Link: https://lore.kernel.org/r/20220608115849.16693-8-njavali@marvell.com Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: qla2xxx: edif: Reduce Initiator-Initiator thrashingQuinn Tran
This patch uses GFFID switch command to scan whether remote device is Target or Initiator mode. Based on that info, driver will not pass up Initiator info to authentication application. This helps reduce unnecessary stress for authentication application to deal with unused connections. Link: https://lore.kernel.org/r/20220607044627.19563-2-njavali@marvell.com Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix N2N inconsistent PLOGIQuinn Tran
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This is not consistent. Delete the session to restart the connection where ELS pass through PLOGI would be used consistently. Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com Fixes: c76ae845ea83 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: qla2xxx: Add qla2x00_async_done() for async routinesSaurav Kashyap
This done routine will delete the timer and check for its return value and decrease the reference count accordingly. This prevents boot hangs reported after commit 31e6cdbe0eae ("scsi: qla2xxx: Implement ref count for SRB") was merged. Link: https://lore.kernel.org/r/20220208093946.4471-1-njavali@marvell.com Fixes: 31e6cdbe0eae ("scsi: qla2xxx: Implement ref count for SRB") Reported-by: Ewan Milne <emilne@redhat.com> Tested-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Implement ref count for SRBSaurav Kashyap
The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21 qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400. qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx] Obvious solution to this is to introduce a reference counter. One reference is taken for the normal code path (the 'good' case) and one for the timeout path. As we always race between the normal good case and the timeout/abort handler we need to serialize it. Also we cannot assume any order between the handlers. Since this is slow path we can use proper synchronization via locks. When we are able to cancel a timer (del_timer returns 1) we know there can't be any error handling in progress because the timeout handler hasn't expired yet, thus we can safely decrement the refcounter by one. If we are not able to cancel the timer, we know an abort handler is running. We have to make sure we call sp->done() in the abort handlers before calling kref_put(). Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Refactor asynchronous command initializationDaniel Wagner
Move common open-coded asynchronous command initializing code such as setting up the timer and the done callback into one function. This is a preparation step and allows us later on to change the low level error flow handling at a central place. Link: https://lore.kernel.org/r/20220110050218.3958-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Fix inconsistent check of db_flagsQuinn Tran
db_flags field is a bit field. Replace value check with bit flag check. Link: https://lore.kernel.org/r/20211026115412.27691-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Do secure PLOGI when auth app is presentQuinn Tran
For initiator mode, always do secure login when authentication app started. Also remove redundant flags to indicate secure connection. Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Add N2N support for EDIFQuinn Tran
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will pause after PLOGI to allow app to authenticate. Once authentication completes, app will tell driver to do PRLI. Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add encryption to I/O pathQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. After the completion of PLOGI, both sides have authenticated and PRLI completed, encrypted I/Os are allowed to proceed. - Use new firmware API to encrypt traffic on the wire - Add driver parameter to enable|disable EDIF feature # modprobe qla2xxx ql2xsecenable=1 Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add detection of secure deviceQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. There is no FC switch scan service that can indicate whether a device is secure or non-secure. In order to detect whether the remote port supports encrypted operation, driver must first do a PLOGI with the remote device. On completion of the PLOGI, driver will query firmware to see if the device supports secure login. To do that, driver + firmware must advertise the security bit via PLOGI's service parameter. The remote device shall respond using the same service parameter whether it supports it or not. Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add key updateQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. As part of the authentication process, the authentication application will generate a SADB entry (Security Association/SA, key, SPI value, etc). This SADB is then passed to driver to be programmed into hardware. There will be a pair of SADB's (Tx and Rx) for each connection. After some period, the application can choose to change the key. At that time, a new set of SADB pair is given to driver. The old set of SADB will be deleted. Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow adding or deleting SADB entries. Driver will not keep the key in memory. It will pass it to HW. It is assumed that application will assign a unique SPI value to this SADB (SA + key). Driver + hardware will assign a handle to track this unique SPI/SADB. Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add send, receive, and accept for auth_elsQuinn Tran
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add the ability for authentication application to send and retrieve messages as part of the authentication process via existing FC_BSG_HST_ELS_NOLOGIN BSG interface. To send a message, application is expected to format the data in the AUTH ELS format. Refer to FC-SP2 for details. If a message was received, application is required to reply with either a LS_ACC or LS_RJT complete the exchange using the same interface. Otherwise, remote device will treat it as a timeout. Link: https://lore.kernel.org/r/20210624052606.21613-4-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-20scsi: qla2xxx: Use the proper SCSI midlayer interfaces for PIMartin K. Petersen
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags. Link: https://lore.kernel.org/r/20210609033929.3815-4-martin.petersen@oracle.com Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Message-Id: <20210609033929.3815-4-martin.petersen@oracle.com>
2021-06-22scsi: qla2xxx: Add heartbeat checkQuinn Tran
Use "no-op" mailbox command to check if the adapter firmware is still responsive. Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Fix crash in PCIe error handlingQuinn Tran
BUG: unable to handle kernel NULL pointer dereference at (null) IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1715 Comm: kworker/0:2 Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5 Hardware name: HPE Superdome Flex/Superdome Flex, BIOS Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020 Workqueue: events aer_recover_work_func task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000 RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000 RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8 RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000 R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000 R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0 FS: 0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx] report_slot_reset+0x41/0x80 ? merge_result.part.4+0x30/0x30 pci_walk_bus+0x70/0x90 pcie_do_recovery+0x1db/0x2e0 aer_recover_work_func+0xc2/0xf0 process_one_work+0x14c/0x390 Disable board_disable logic where driver resources are freed while OS is in the process of recovering the adapter. Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Fix IOPS drop seen in some adaptersArun Easi
Removing the response queue processing in the send path is showing IOPS drop. Add back the process_response_queue() call in the send path. Link: https://lore.kernel.org/r/20210329085229.4367-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: qla2xxx: Fix endianness annotationsBart Van Assche
Fix all recently introduced endianness annotation issues. Link: https://lore.kernel.org/r/20210320232359.941-4-bvanassche@acm.org Cc: Quinn Tran <qutran@marvell.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: qla2xxx: Replace __qla2x00_marker()'s missing underscoresLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla2xxx/qla_iocb.c:508: warning: expecting prototype for qla2x00_marker(). Prototype was for __qla2x00_marker() instead Link: https://lore.kernel.org/r/20210303144631.3175331-16-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: qla2xxx: Enable NVMe CONF (BIT_7) when enabling SLERSaurav Kashyap
Enable NVMe confirmation bit in PRLI. Link: https://lore.kernel.org/r/20210111093134.1206-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: qla2xxx: Wait for ABTS response on I/O timeouts for NVMeBikash Hazarika
FW needs to wait for an ABTS response before completing the I/O. Link: https://lore.kernel.org/r/20210111093134.1206-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-14Merge tag 'spdx-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are some SPDX-specific changes for 5.10-rc1. They include: - driver fixes to make spdxcheck.pl work properly - add GFDL licenses as "deprecated" but required due to some of our documentation using them - add Zlib license as "deprecated" but required because we have code with this license in the tree. - convert some drivers to have SPDX identifiers that previously didn't have them. All have been in linux-next for a very long time with no reported issues" * tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/spdxcheck.py: handle license identifiers in XML comments net/mlx5: IPsec: make spdxcheck.py happy LICENSES/deprecated: add Zlib license text LICENSE: add GFDL deprecated licenses net/qla3xxx: Convert to SPDX license identifiers net/qlge: Convert to SPDX license identifiers net/qlcnic: Convert to SPDX license identifiers scsi/qla2xxx: Convert to SPDX license identifiers scsi/qla4xxx: Convert to SPDX license identifiers
2020-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-09-29scsi: qla2xxx: Fix buffer-buffer credit extraction errorQuinn Tran
Current code uses wrong mailbox option to extract bbc from firmware. This field is nested inside of PLOGI payload. Extract bbc from PLOGI template payload. Link: https://lore.kernel.org/r/20200929102152.32278-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Add SLER and PI control supportSaurav Kashyap
BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15 of special feature control block for enabling SLER in FW. Set bit 8 (SLER supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_14 of special feature control block for enabling PI Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_13 for NVMe Async events. Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Add IOCB resource trackingQuinn Tran
This patch tracks number of IOCB resources used in the I/O fast path. If the number of used IOCBs reach a high water limit, driver would return the I/O as busy and let upper layer retry. This prevents over subscription of IOCB resources where any future error recovery command is unable to cut through. Enable IOCB throttling by default. Link: https://lore.kernel.org/r/20200904045128.23631-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Performance tweakQuinn Tran
Move statistics fields from vha struct to qpair to reduce memory thrashing. Link: https://lore.kernel.org/r/20200904045128.23631-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi/qla2xxx: Convert to SPDX license identifiersThomas Gleixner
All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-30scsi: qla2xxx: Make __qla2x00_alloc_iocbs() initialize 32 bits of ↵Bart Van Assche
request_t.handle The request_t 'handle' member is 32-bits wide, hence use wrt_reg_dword(). Change the cast in the wrt_reg_byte() call to make it clear that a regular pointer is casted to an __iomem pointer. Note: 'pkt' points to I/O memory for the qlafx00 adapter family and to coherent memory for all other adapter families. This patch fixes the following Coverity complaint: CID 358864 (#1 of 1): Reliance on integer endianness (INCOMPATIBLE_CAST) incompatible_cast: Pointer &pkt->handle points to an object whose effective type is unsigned int (32 bits, unsigned) but is dereferenced as a narrower unsigned short (16 bits, unsigned). This may lead to unexpected results depending on machine endianness. Link: https://lore.kernel.org/r/20200629225454.22863-7-bvanassche@acm.org Fixes: 8ae6d9c7eb10 ("[SCSI] qla2xxx: Enhancements to support ISPFx00.") Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-07-31 01:53:59 +0000