| Age | Commit message (Collapse) | Author |
|---|
|
The PCC driver now handles mapping and unmapping of shared memory
areas as part of pcc_mbox_{request,free}_channel(). Without these before,
this Kunpeng HCCS driver did handling of those mappings like several
other PCC mailbox client drivers.
There were redundant operations, leading to unnecessary code. Maintaining
the consistency across these driver was harder due to scattered handling
of shmem.
Just use the mapped shmem and remove all redundant operations from this
driver.
Cc: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
String assembly should use sysfs_emit_at() instead of sysfs_emit().
Fixes: 23fe8112a231 ("soc: hisilicon: kunpeng_hccs: Add used HCCS types sysfs")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250314100143.3377268-1-lihuisong@huawei.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into arm/drivers
HiSilicon driver updates for v6.13
- Add the sysfs to show all HCCS types used on the platform
- Add the low power feature for HCCS by adjusting the lane number
- Few cleanups and improvements: correct a PCC typo, verify the die, port
information, base address and size, update the lane_mode to max_lane_num
* tag 'hisi-drivers-for-6.13' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: Support low power feature for the specified HCCS type
soc: hisilicon: kunpeng_hccs: Add used HCCS types sysfs
soc: hisilicon: kunpeng_hccs: Fix the 'lane_mode' field name in port info structure to 'max_lane_num'
soc: hisilicon: kunpeng_hccs: Add the check for base address and size of shared memory
soc: hisilicon: kunpeng_hccs: Return failure on having not die or port information
soc: hisilicon: kunpeng_hccs: Fix a PCC typo
Link: https://lore.kernel.org/r/671B3FBD.8050905@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/soc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way do a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Herve Codina <herve.codina@bootlin.com> # for fsl/qe/{qmc,tsa}.c
Acked-by: Bjorn Andersson <andersson@kernel.org> # qcom parts
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed
Link: https://lore.kernel.org/r/20241029074859.509587-2-u.kleine-koenig@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
HCCS type
Add the low power feature for the specified HCCS type by increasing
and decreasing the used lane number of these HCCS ports on platform.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Kunpeng_hccs driver supports multiple HCCS types used on one platform at
the same time. In this case, to find which HCCS types are used on the
platform the user needs to scan the type attribute of all ports, which is
unfriendly to the user. In addition, the aggregated information is also
useful for global control like the low power feature.
So add the sysfs to show all HCCS types used on the platform.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
structure to 'max_lane_num'
The lane mode of HCCS port is an information to user, and actually comes
from the maximum lane number. But it is good and easy for driver to use
the maximum lane number. So fix the 'lane_mode' field name in port info
structure to 'max_lane_num'.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
shared memory
If the shmem_base_addr from PCCT is zero, hccs_register_pcc_channel will
return success. And then driver will access to illegal address when send
PCC command. In addition, the size of shared memory used for communication
between driver and platform is fixed, namely 64 Bytes which is
unchangeable. So add the verification for hardening code.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
information
Driver is unavailable if all die number or all port number obtained from
firmware are zero. Although this is unlikely, just to harden the code.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Fix a PCC typo.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
The kunpeng_hccs driver depends on the Platform Communication Channel
Driver. If the PCC driver is not enabled, this driver will be failed
to probe. And since the PCC driver depends on the MAILBOX, replace
the MAILBOX dependency with the PCC.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
attribute
The hccs_get_all_port_attr() is used to obtain the attribute of all the
ports on a specified DIE from the firmware. However this interface doesn't
ensure whether the firmware reports the complete attribute of all the ports
or not. So this patch adds the check for this.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
interrupt ack
Support the platform with PCC type3 and interrupt ack. And a version
specific structure is introduced to handle the difference between the
device in the code.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Remove an unused blank line.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Driver gets the PCC channel id by using the PCC GAS in _CRS.
But, currently, if the firmware has no _CRS method on platform, there
is not any failure log. So this patch adds the log for this.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Fix some incorrect format strings.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20230925095532.1984344-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Use the newly defined common and generic PCC shared memory region
related macros in this driver to replace the locally defined ones.
Cc: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20230927-pcc_defines-v2-4-0b8ffeaef2e5@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
This patch fixes some sparse warnings about incorrect type.
The address about PCC communication space should use '__iomem' tag.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308151142.dH5Muhva-lkp@intel.com/
Fixes: 886bdf9c883b ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20230816073706.33297-1-lihuisong@huawei.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When the mailbox subsystem is disabled, the driver fails to link, so add
an explicit dependency. Some other drivers use 'select' here, but the
dependency seems more logical and more common.
Fixes: 886bdf9c883bc ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Printing a size_t using the %lu format string causes a warning on
architectures that define the type as 'unsigned int':
In file included from include/linux/device.h:15,
from include/linux/acpi.h:14,
from drivers/soc/hisilicon/kunpeng_hccs.c:25:
drivers/soc/hisilicon/kunpeng_hccs.c: In function 'hccs_get_bd_info':
drivers/soc/hisilicon/kunpeng_hccs.c:441:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
Use the correct %zu format instead.
Fixes: 886bdf9c883bc ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch creates chip, die and port directory based on the actual
hardware implementation of platform. Some sysfs entries under these
directories are created to query the health status and port information
of HCCS.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
The Huawei Cache Coherence System (HCCS) is a multi-chip interconnection
bus protocol. This driver is aimed to support some features about HCCS on
Kunpeng SoC, like, querying the health status of HCCS.
This patch adds the probing of HCCS driver, and obtains all HCCS port
information by the dimension of chip and die on platform.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
