| Age | Commit message (Collapse) | Author |
|---|
|
It becomes possible to do discards after a journal flush, which
naturally the journal code is reponsible for.
A prior refactoring seems to have broken this - which went unnoticed
because the foreground allocator path can also trigger discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a mount option for rewinding the journal, bringing the entire
filesystem to where it was at a previous point in time.
This is for extreme disaster recovery scenarios - it's not intended as
an undelete operation.
The option takes a journal sequence number; the desired sequence number
can be determined with 'bcachefs list_journal'
Caveats:
- The 'journal_transaction_names' option must have been enabled (it's on
by default). The option controls emitting of extra debug info in the
journal, so we can see what individual transactions were doing;
It also enables journalling of keys being overwritten, which is what
we rely on here.
- A full fsck run will be automatically triggered since alloc info will
be inconsistent. Only leaf node updates to non-alloc btrees are
rewound, since rewinding interior btree updates isn't possible or
desirable.
- We can't do anything about data that was deleted and overwritten.
Lots of metadata updates after the point in time we're rewinding to
shouldn't cause a problem, since we segragate data and metadata
allocations (this is in order to make repair by btree node scan
practical on larger filesystems; there's a small 64-bit per device
bitmap in the superblock of device ranges with btree nodes, and we try
to keep this small).
However, having discards enabled will cause problems, since buckets
are discarded as soon as they become empty (this is why we don't
implement fstrim: we don't need it).
Hopefully, this feature will be a one-off thing that's never used
again: this was implemented for recovering from the "vfs i_nlink 0 ->
subvol deletion" bug, and that bug was unusually disastrous and
additional safeguards have since been implemented.
But if it does turn out that we need this more in the future, I'll
have to implement an option so that empty buckets aren't discarded
immediately - lagging by perhaps 1% of device capacity.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Users seem to be assuming that the 'dropped unflushed entries' message
at the end of journal read indicates some sort of problem, when it does
not - we expect there to be entries in the journal that weren't
commited, it's purely informational so that we can correlate journal
sequence numbers elsewhere when debugging.
Shorten the log message a bit to hopefully make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a tracepoint for any time we return an error and unwind.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The new guard(), scoped_guard() allow for more natural code.
Some of the uses with creative flow control have been left.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More stack usage work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's uncomon to have multiple devices with journalling only on a subset,
but can be specified with the 'data_allowed' option. We need to know if
we're doing data/metadata writes to multiple devices, as that requires
issuing flushes before the journal writes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix an infinite loop when bkey_i->k.u64s is 0.
This only happens in userspace, where 'bcachefs list_journal' can print
the entire contents of the journal, and non-dirty entries aren't
validated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Don't print a checksum error when we first read a journal entry: we
print a checksum error later if we'll be using the journal entry.
- Continuing with the theme of of improving error messages and grouping
errors into a single log message per error, print a single 'checksum
error' message per journal entry, and use bch2_journal_ptr_to_text()
to print out where on the device it was.
- Factor out checksum error messages and checking for missing journal
entries into helpers, bch2_journal_read() has gotten obnoxiously big.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to delay checksumming the journal write; we don't know the
blocksize until after we allocate the write.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More error message cleanup: instead of multiple printk()s per error, we
want to be building up a single error message in a printbuf, so that it
can be printed with indenting that shows grouping and avoid errors
getting interspersed or lost in the log.
This gets rid of most calls to bch2_fs_emergency_read_only(). We still
have calls to
- bch2_fatal_error()
- bch2_fs_fatal_error()
- bch2_fs_fatal_err_on()
that need work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Make the locking easier to follow; also take io_refs earlier, in
__journal_write_alloc().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Refactor a couple of structs that contain flexible arrays in the
middle by replacing them with unions.
So, with these changes, fix the following warnings:
fs/bcachefs/disk_accounting.c:429:51: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/bcachefs/ec_types.h:8:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Convert device IO refs to enumerated_refs, for easier debugging of
refcount issues.
Simple conversion: enumerate all users and convert to the new helpers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_print_string_as_lines() is a low level helper that allows messages
longer than 1k to be printed without truncation.
But we should always be printing with the helpers that take a filesystem
object, if we're in fsck they direct output to the userspace process
controlling fsck instead of the dmesg log.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Replace u64 with __le64 to match the expected parameter type. Ensure consistency both in function calls and within the function itself.
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now have separate per device io_refs for read and write access.
This fixes a device removal bug where the discard workers were still
running while we're removing alloc info for that device.
It's also a bit of hardening; we no longer allow writes to devices that
are read-only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a journal entry type for logging - but logging a bkey, not a string;
to be used for data move path debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't care about errors from asynchronous ops that were because we
did an emergency shutdown; silence them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add the new helper printbuf_indent_add_nextline(), and use it in
__bch2_fsck_err() to centralize setting the indentation of multiline
fsck errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We want to log errors all at once, not spread across multiple printks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Replace these with proper private error codes, so that when we get an
error message we're not sifting through the entire codebase to see where
it came from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Found with CC=clang W=1
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The next patch implementing freezing will change bch2_dev_get_ioref() to
sleep if a device is currently frozen.
Add an annotation and fix the journal code accordingly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More prep work for automatically kicking devices out after too many IO
errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since we're increasing the number of 'struct journal_bufs', we don't
want them all permanently holding onto buffers for the journal data -
that'd be 16 * 2MB = 32MB, or potentially more.
Add a single-element mempool (open coded, since buffer size varies),
this also means we won't be hitting the memory allocator every time we
open and close a journal entry/buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
System performance is particularly sensitive to journal write latency,
the number of outstanding journal writes is bounded and we can't issue
journal flushes until other journal writes have completed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This lets us print the exact location in the journal if it was found in
the journal, or correctly print if it was found in the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This lets us use darray macros on dev_alloc_list (and it will become a
darray eventually, when we increase the maximum number of devices).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When allocating a journal write fails, then retries after doing
discards, we were failing to count already allocated replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
kill another standard error code use
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new parameter to bkey validate functions, and use it to improve
invalid bkey error messages: we can now print the btree and depth it
came from, or if it came from the journal, or is a btree root.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Remove hard-coded strings by using the helper function str_write_read().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prefer bch2_btree_id_to_text() - it prints out the integer ID when
unknown.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Needed for improved userspace cmd_list_journal
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the jset_entry_dev_usage is malformed, and too small, our nr_entries
calculation will be incorrect - just bail out.
Reported-by: syzbot+05d7520be047c9be86e0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bio_kmalloc may return NULL, will cause NULL pointer dereference.
Add check NULL return for bio_kmalloc in journal_read_bucket.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Fixes: ac10a9611d87 ("bcachefs: Some fixes for building in userspace")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add the __counted_by compiler attribute to the flexible array members
devs to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Increment nr_devs before adding a new device to the devs array and
adjust the array indexes accordingly. Add a helper macro for adding a
new device.
In bch2_journal_read(), explicitly set nr_devs to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
