| Age | Commit message (Collapse) | Author |
|---|
|
Rename the sof_ipc4_copier_is_single_format() to
sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of
'format' when we are querying information on the bit depth.
Format is used to describe a combination of parameters (rate, channels,
sample format / bit depth).
Rename the flags used to store the result at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The node_id for multi-gateway ALH DAI's get overwritten with the
group_id during the DAI copier's ipc_prepare op. So, save the ALH
dai_index during the BE DAI hw_params in the dai_index field of struct
ipc4_copier and use that to set the device ID in the configuration blob.
This will avoid errors during copier init after an xrun.
Note that the dai_index is typically set in topology for DMIC/SSP, but
it's not used for ALH. Reclaiming this dai_index field to store the
node_id does not generate a conflict with topology-defined values.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each stream needs a dma_config_tlv. We will handle multi dma_config_tlv
in the follow up commits.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the base_cfg to struct sof_ipc4_gain_data. This struct
describes the message payload passed to the firmware via the mailbox.
It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Separate the IPC message part as struct sof_ipc4_src_data. This struct
describes the message payload passed to the firmware via the mailbox.
It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently IPC4 has no notion of a switch or enum type of control which is
a generic concept in ALSA.
The generic support for these control types will be as follows:
- large config is used to send the channel-value par array
- param_id of a SWITCH type is 200
- param_id of an ENUM type is 201
Each module need to support a switch or/and enum must handle these
universal param_ids.
The message payload is described by struct sof_ipc4_control_msg_payload.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919103115.30783-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We will use the sof_ipc4_copier_is_single_format() function to check if a
ipc4 copier has single format available in ipc4-pcm.c in the next patch.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915093507.7242-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A pipeline is identified by two indices: 'instance_id' and 'pipeline_id'
This is clearly seen in kernel logs when creating a pipeline
"Create widget pipeline.20 instance 0 - pipe 20 - core 0"
but other logs are less clear
"ipc4 set pipeline 1 state 4"
Change definitions and logs to make sure the logs clearly identify
which of the two indices are used in state transitions.
No functional change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds a DMA config TLV structure and the relevant code to
copy this TLV after the gateway configuration. For now this is an
iso-functionality change, the TLVs are not configured just
yet. Additional patches will be needed for DMIC/SSP/ALH (aka
SoundWire).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Starting with LunarLake, the DMIC/SSP/SoundWire audio interfaces will
use the HDaudio DMA. This patch adds the DMA configuration structure
to be passed as a TLV appended at the end of each gateway
configuration.
This patch only provides the definitions for now, the TLV will be
added in the actual blobs separately for each interface.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
LunarLake introduces a new TLV blob passed to the firmware for DMA
configuration. This TLV structure is directly inspired by the ALH
multi-gateway structure used so far. This patch suggest a transition
to the more abstract structure with no references to ALH.
This is an iso-functionality redefinition of structure, the TLV will
be added in a follow-up patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add logic for setting up and tearing down chained DMA connections.
Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.
Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.
Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.
Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some processing modules need the audio formats for all their input and
output pins appended to the base config during module init. So add support
for building the base config extension using the available pin formats
from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The modules currently supported by the SOF firmware use the base module
config containing the audio format for the input/output pin 0 for
initialization. But some processing modules with multiple input/output
pins require the audio formats to be sent with the init instance IPC
payload. Modules that require the base config extension will need to
indicate this in the module information in the firmware manifest.
Introduce a new struct sof_ipc4_base_module_cfg_ext which contains the
pin formats for the input and output pins. This will be appended to the
init instance IPC payload for modules that require it.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the general support of IPC4 effect widgets.
IPC4 effect widgets, known as process modules, can be EQFIR,
EQIIR, KEYWORD_DETECT, KPB, CHAN_SELECTOR, SMART_AMP and etc.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for handling processing modules with different
input/output pin counts, introduce two new tokens for input/output
audio format counts. Use these token values to parse all the available
audio formats from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the field in struct sof_ipc4_available_audio_format and pass the
format list to be searched as an argument to sof_ipc4_init_audio_fmt()
directly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce a new struct sof_ipc4_pin_format which contains the pin index
and the buffer size. Replace the type of available input/output audio
formats in struct sof_ipc4_available_audio_format with this new struct
type and rename them to input_pin_fmts and output_pin_fmts.
Also, add a new token, SOF_TKN_CAVS_AUDIO_FORMAT_PIN_INDEX that will be
used to parse the pin index for the audio format from topology.
Currently we only set the audio format for Pin 0 in topology, so the
default value will be 0 for all audio formats.
Finally, parse the pin_index and the input/output buffer sizes
along with audio formats into the pin_format arrays in struct
sof_ipc4_available_audio_format. This makes the base_config array in struct
sof_ipc4_available_audio_format redundant. So remove it. This change
will allow the addition of audio formats for the non-zero pins in
topology transparent to the topology parser in the kernel.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Do not parse the SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE token as the
dma_buffer_size can be derived from the input/output buffer size and the
type of widget during copier prepare. For the deep buffer case,
introduce a new token that will be used to get the deep buffer DMA size
for the host copier from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_available_audio_format
Add a new field, input_audio_fmts, in struct
sof_ipc4_available_audio_format and parse all the available input audio
formats into this new field and not into the base_config field. This is
preparation to remove the base_config array from the struct
sof_ipc4_available_audio_format.
This simplifies the sof_ipc4_init_audio_fmt()
function as the reference audio format for matching with input params
has the same size.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
New SOF changes require the current set of fixes.
|
|
Token SOF_TKN_SCHED_CORE in topology file can specify the target core for
the pipeline, if it is missing it is going to be 0 (as it is right now).
Firmware will double-check all information retrieved by topology and
report errors if required. This will allow policy and changes in
topologies without a need for a synchronized kernel change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230307123556.31328-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Recent firmware changes modified the curve duration from 32 to 64 bits,
which breaks volume ramps. A simple solution would be to change the
definition, but unfortunately the ASoC topology framework only supports
up to 32 bit tokens.
This patch suggests breaking the 64 bit value in low and high parts, with
only the low-part extracted from topology and high-part only zeroes. Since
the curve duration is represented in hundred of nanoseconds, we can still
represent a 400s ramp, which is just fine. The defacto ABI change has no
effect on existing users since the IPC4 firmware has not been released just
yet.
Link: https://github.com/thesofproject/linux/issues/4026
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110656.1816-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Dmic dai index was set incorrectly to bits 5-7, when it is actually using
just the lowest 3. Fix the macro for setting the bits.
Fixes: aa84ffb72158 ("ASoC: SOF: ipc4-topology: Add support for SSP/DMIC DAI's")
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110730.1995-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
member
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members, instead.
Use the DECLARE_FLEX_ARRAY() helper macro to transform zero-length
arrays in unions with flexible-array members.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
sound/soc/sof/ipc4-control.c:176:77: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:78:29: warning: array subscript 0 is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:80:33: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:95:53: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:96:53: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:93:53: warning: array subscript 0 is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:140:58: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:141:29: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:142:29: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-topology.c:1475:36: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-topology.c:1476:36: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/258
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/Y/gyIg1qZduhigPi@work
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
MOD_INIT_INSTANCE IPC for a copier only contains the sink format for
output pin 0. Any additional output pins that are used need to have their
sink format set using the LARGE_CONFIG_SET IPC message.
Otherwise, firmware will report error or crash due to NULL format is used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230209142123.17193-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the list of pipelines in the PCM stream's pipeline info to trigger
the pipelines in the right order. Add a helper for triggering pipelines
in batch mode that will be used to trigger multiple pipelines at the
same time.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new flag, skip_during_fe_trigger, to struct sof_ipc4_pipeline to
skip triggering pipelines in the FE DAI trigger. Set this flag for the
HDA DAI BE pipelines so that their BE pipeline will not be triggered in
the FE DAI trigger. Also, move the trigger handling for all commands
include START/PAUSE_RELEASE for the HDA DAI's to the backend DAI trigger
ops.
For the SSP/DMIC/SDW cases, remove the BE DAI trigger as they involve no
DMA operations and can be triggered in the FE DAI trigger. This is in
preparation to perform batch triggering of all pipelines for the non-HDA
case.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The corresponding IPC4 module of snd_soc_dapm_buffer widget is module
-to-module copier.
The module-to-module copier is a buffer-like component with demuxing
capabilities.
Rename the host_token_list to common_copier_token_list since it will
be used by host copier and module-to-module copier.
The setup callback is almost the same as sof_ipc4_widget_setup_pcm except
the gtw_cfg data, and the free callback is exactly the same as
sof_ipc4_widget_free_comp_pcm. To reduce the duplication, the commit
reuses the setup and free callbacks.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230126110637.25542-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the domain bit in ipc msg for module initialization is
set to lp (low power) mode for pipeline. This is not correct since
it is for module domain type: ll domain or dp domain which are for
scheduler in fw. If the domain bit is set to 1 fw will process the
module in dp domain or deal it with ll domain. So set domain bit
based on dp domain setting.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SRC module only needs two parameters : base module config
and sink rate. This patch adds prepare and setup for SRC
widgets.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some SoundWire hardware topologies rely on different amplifiers or
capture devices connected on different links. These devices need to be
'aggregated', remain synchronized and be handled as a single logical
device.
In the IPC3 solution, the aggregation for amplifiers was handled by a
firmware 'demux' component. In the IPC4 solution, the demux component is
not needed, the gateway component can handle multiple ALH/DMA transfers
at the same time. This change makes the topology slightly more complicated
in that only one ALH DAI will be connected in the topology with the
gateway. The other DAIs that are part of the 'aggregated' dailink are not
shown in the DAPM graph as connected to the gateway, but they will however
be activated thanks to a feature in soc-dapm.c where events are forwarded
to all DAIs in the dailink (see soc_dapm_stream_event).
The topology also sets the same stream name for all widgets, dais and
dailinks, so a search for the stream name helps identify cases where
SoundWire/ALH aggregation is needed.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220614092630.20144-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add IPC4 SoundWire blob. It includes a common IPC4 gateway and a multiple
ALH configuration struct which is used for storing the aggregated
SoundWire stream information.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-24-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The copier config for SSP and DMIC type DAI copiers needs to be parsed
and matched with the runtime hw_config from the NHLT table. Along with
this, also add the change to set the node_id for these copier types.
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-22-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the dai_config op for IPC4.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing and preparing mixer type widgets. Define the
token ID's and the associated token arrays needed to parse these
widgets.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing and preparing pga type widgets. Define the
token ID's and the associated token arrays needed to parse these
widgets.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define the prepare op for the AIF type widgets for IPC4.
The prepare op is responsible for choosing the input/output audio
formats for these widgets based on the runtime PCM params, assigning the
instance ID and updating the total memory usage for the pipelines these
widgets belong to.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing AIF_IN/AIF_OUT type widgets in IPC4. Add all the
new required token ID's for parsing these widgets to the list of tokens in
enum sof_tokens and the definitions of the token arrays corresponding to
each of the token ID's.
Also, upgrade the sof_widget_parse_tokens() function in the common
topology parser to be able to parse multiple sets of tokens for the
audio format and copier gateway config tokens.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce the topology ops for IPC4. Set the widget_ops and token_list
for parsing the scheduler type widget. Support for other widget types
will be added in the follow up patches.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20220609032643.916882-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
