| Age | Commit message (Collapse) | Author |
|---|
|
As both client and server print the same test name on failure or pass,
add "[server]" so that it's more obvious from a log which side printed
"ok" or "not ok".
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-5-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, tcp_ao tests have two timeouts: TEST_RETRANSMIT_SEC and
TEST_TIMEOUT_SEC [by default 1 and 5 seconds]. The first one,
TEST_RETRANSMIT_SEC is used for operations that are expected to succeed
in order for a test to pass. It is usually not consumed and exists only
to avoid indefinite test run if the operation didn't complete.
The second one, TEST_RETRANSMIT_SEC exists for the tests that checking
operations, that are expected to fail/timeout. It is shorter as it is
fully consumed, with an expectation that if operation didn't succeed
during that period, it will timeout. And the related test that expects
the timeout is passing. The actual operation failure is then
cross-verified by other means like counters checks.
The issue with TEST_RETRANSMIT_SEC timeout is that 1 second is the exact
initial TCP timeout. So, in case the initial segment gets lost (quite
unlikely on local veth interface between two net namespaces, yet happens
in slow VMs), the retransmission never happens and as a result, the test
is not actually testing the functionality. Which in the end fails
counters checks.
As I want tcp_ao selftests to be fast and finishing in a reasonable
amount of time on manual run, I didn't consider increasing
TEST_RETRANSMIT_SEC.
Rather, initially, BPF_SOCK_OPS_TIMEOUT_INIT looked promising as a lever
to make the initial TCP timeout shorter. But as it's not a socket bpf
attached thing, but sock_ops (attaches to cgroups), the selftests would
have to use libbpf, which I wanted to avoid if not absolutely required.
Instead, use a mixed select() and counters polling mode with the longer
TEST_TIMEOUT_SEC timeout to detect running-away failed tests. It
actually not only allows losing segments and succeeding after
the previous TEST_RETRANSMIT_SEC timeout was consumed, but makes
the tests expecting timeout/failure pass faster.
The only test case taking longer (TEST_TIMEOUT_SEC) now is connect-deny
"wrong snd id", which checks for no key on SYN-ACK for which there is no
counter in the kernel (see tcp_make_synack()). Yet it can be speed up
by poking skpair from the trace event (see trace_tcp_ao_synack_no_key).
Fixes: ed9d09b309b1 ("selftests/net: Add a test for TCP-AO keys matching")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20241205070656.6ef344d7@kernel.org/
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-4-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are related TCP-MD5 <=> TCP and TCP-MD5 <=> TCP-AO tests
that can benefit from checking the related counters, not only from
validating operations timeouts.
It also prepares the code for introduction of mixed select()+poll mode,
see the follow-up patches.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-3-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename __test_tcp_ao_counters_cmp() into test_assert_counters_ao() and
test_tcp_ao_key_counters_cmp() into test_assert_counters_key() as they
are asserts, rather than just compare functions.
Provide test_cmp_counters() helper, that's going to be used to compare
ao_info and netns counters as a stop condition for polling the sockets.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-2-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setup trace points, add a new ftrace instance in order to not interfere
with the rest of the system, filtering by net namespace cookies.
Raise a new background thread that parses trace_pipe, matches them with
the list of expected events.
Wiring up trace events to selftests provides another insight if there is
anything unexpected happining in the tcp-ao code (i.e. key rotation when
it's not expected).
Note: in real programs libtraceevent should be used instead of this
manual labor of setting ftrace up and parsing. I'm not using it here
as I don't want to have an .so library dependency that one would have to
bring into VM or DUT (Device Under Test). Please, don't copy it over
into any real world programs, that aren't tests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-8-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On tests that are expecting failure the timeout value is
TEST_RETRANSMIT_SEC == 1 second. Which is big enough for most of devices
under tests. But on a particularly slow machine/VM, 1 second might be
not enough for another thread to be scheduled and attempt to connect().
It is not a problem for tests that expect connect() to succeed as
the timeout value for them (TEST_TIMEOUT_SEC) is intentionally bigger.
One obvious way to solve this would be to increase TEST_RETRANSMIT_SEC.
But as all tests would increase the timeouts, that's going to sum up.
But here is less obvious way that keeps timeouts for expected connect()
failures low: just synchronize the two threads, which will assure that
before counter checks the other thread got a chance to run and timeout
on connect(). The expected increase of the related counter for listen()
socket will yet test the expected failure.
Never happens on my machine, but I suppose the majority of netdev's
connect-deny-* flakes [1] are caused by this.
Prevents the following testing issue:
> # selftests: net/tcp_ao: connect-deny_ipv6
> # 1..21
> # # 462[lib/setup.c:243] rand seed 1720905426
> # TAP version 13
> # ok 1 Non-AO server + AO client
> # not ok 2 Non-AO server + AO client: TCPAOKeyNotFound counter did not increase: 0 <= 0
> # ok 3 AO server + Non-AO client
> # ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
...
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao/results/681741/6-connect-deny-ipv6/stdout
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-7-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not safe to use '%zu' specifier for printing uint64_t on 32-bit
systems. For uint64_t, we should use the 'PRIu64' macro from
the inttypes.h library. This ensures that the uint64_t is printed
correctly from the selftests regardless of the system architecture.
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
[Added missing spaces in fail/ok messages and uint64_t cast in
setsockopt-closed, as otherwise it was giving warnings on 64bit.
And carried it to netdev ml]
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-6-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests here check not only that connect()/accept() for
TCP-AO/TCP-MD5/non-signed-TCP combinations do/don't establish
connections, but also counters: those are per-AO-key, per-socket and
per-netns.
The counters are checked on the server's side, as the server listener
has TCP-AO/TCP-MD5/no keys for different peers. All tests run in
the same namespaces with the same veth pair, created in test_init().
After close() in both client and server, the sides go through
the regular FIN/ACK + FIN/ACK sequence, which goes in the background.
If the selftest has already started a new testing scenario, read
per-netns counters - it may fail in the end iff it doesn't expect
the TCPAOGood per-netns counters go up during the test.
Let's just kill both TCP-AO sides - that will avoid any asynchronous
background TCP-AO segments going to either sides.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20240201132153.4d68f45e@kernel.org/T/#u
Fixes: 6f0c472a6815 ("selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket tests")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240202-unsigned-md5-netns-counters-v1-1-8b90c37c0566@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In unsigned-md5 selftests ip_route_add() is not needed in
client_add_ip(): the route was pre-setup in __test_init() => link_init()
for subnet, rather than a specific ip-address.
Currently, __ip_route_add() mistakenly always sets VRF table
to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5
tests debugging. That also explains, why ip_route_add_vrf() ignored
EEXIST, returned by fib6.
Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected
that those selftests may add the same (duplicate) routes.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a handful of spelling mistakes in test messages in the
TCP-AIO selftests. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test plan was (most of tests have all 3 client types):
1. TCP-AO listen (INADDR_ANY)
2. TCP-MD5 listen (INADDR_ANY)
3. non-signed listen (INADDR_ANY)
4. TCP-AO + TCP-MD5 listen (prefix)
5. TCP-AO subprefix add failure [checked in setsockopt-closed.c]
6. TCP-AO out of prefix connect [checked in connect-deny.c]
7. TCP-AO + TCP-MD5 on connect()
8. TCP-AO intersect with TCP-MD5 failure
9. Established TCP-AO: add TCP-MD5 key
10. Established TCP-MD5: add TCP-AO key
11. Established non-signed: add TCP-AO key
Output produced:
> # ./unsigned-md5_ipv6
> 1..72
> # 1592[lib/setup.c:239] rand seed 1697567046
> TAP version 13
> ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2
> ok 2 AO server (INADDR_ANY): AO client: connected
> ok 3 AO server (INADDR_ANY): MD5 client
> ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1
> ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1
> ok 6 AO server (INADDR_ANY): unsigned client
> ok 7 AO server (AO_REQUIRED): AO client: connected
> ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6
> ok 9 AO server (AO_REQUIRED): unsigned client
> ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2
> ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1
> ok 12 MD5 server (INADDR_ANY): AO client
> ok 13 MD5 server (INADDR_ANY): MD5 client: connected
> ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks
> ok 15 MD5 server (INADDR_ANY): no sign client
> ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1
> ok 17 no sign server: AO client
> ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2
> ok 19 no sign server: MD5 client
> ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2
> ok 21 no sign server: no sign client: connected
> ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1
> ok 23 AO+MD5 server: AO client (matching): connected
> ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10
> ok 25 AO+MD5 server: AO client (misconfig, matching MD5)
> ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3
> ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4
> ok 28 AO+MD5 server: AO client (misconfig, non-matching)
> ok 29 AO+MD5 server: MD5 client (matching): connected
> ok 30 AO+MD5 server: MD5 client (matching): no counter checks
> ok 31 AO+MD5 server: MD5 client (misconfig, matching AO)
> ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3
> ok 33 AO+MD5 server: MD5 client (misconfig, non-matching)
> ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4
> ok 35 AO+MD5 server: no sign client (unmatched): connected
> ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1
> ok 37 AO+MD5 server: no sign client (misconfig, matching AO)
> ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3
> ok 39 AO+MD5 server: no sign client (misconfig, matching MD5)
> ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2
> ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented
> ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks
> ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented
> ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks
> ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected
> ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14
> ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected
> ok 48 TCP-MD5 established: add TCP-AO key: no counter checks
> ok 49 non-signed established: add TCP-AO key: postfailed as expected
> ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1
> ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service
> ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service
> ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N)
> ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0)
> ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0)
> ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N)
> ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
