arm64: dts: ti: k3-am62-ti-ipc-firmware: Refactor IPC cfg into new dtsi

The TI K3 AM62 SoCs have multiple programmable remote processors like
R5F, M4F etc. The TI SDKs for AM62 SoCs offer sample firmwares which
could be run on these cores to demonstrate an "echo" IPC test. Those
firmware require certain memory carveouts to be reserved from system
memory, timers to be reserved, and certain mailbox configurations for
interrupt based messaging. These configurations could be different for a
different firmware.

While DT is not meant for system configurations, at least refactor these
configurations from board level DTS into a dtsi for now. This dtsi for
TI IPC firmware is board-independent and can be applied to all boards
from the same SoC Family. This gets rid of code duplication and allows
more freedom for users developing custom firmware (or no firmware) to
utilize system resources better; easily by swapping out this dtsi. To
maintain backward compatibility, the dtsi is included in all boards.

Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de> # phycore-am62x
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-32-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

5 files changed, 59 insertions, 175 deletions

diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 75b7e64f6659..eeca643fedbe 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -52,18 +52,6 @@
 			no-map;
 		};
 
-		mcu_m4fss_dma_memory_region: memory@9cb00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: memory@9cc00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
-			no-map;
-		};
-
 		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9da00000 0x00 0x100000>;
@@ -245,20 +233,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
 &main_pktdma {
 	bootph-all;
 };
@@ -364,13 +338,6 @@
 	};
 };
 
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -399,13 +366,4 @@
 	status = "okay";
 };
 
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-	status = "okay";
-};
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
index 621fb6c52db1..7a4cffc27bda 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -54,18 +54,6 @@
 			linux,cma-default;
 		};
 
-		mcu_m4fss_dma_memory_region: memory@9cb00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: memory@9cc00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
-			no-map;
-		};
-
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -298,20 +286,6 @@
 	pinctrl-0 = <&epwm2_pins_default>;
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -362,24 +336,6 @@
 	status = "okay";
 };
 
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-	status = "okay";
-};
-
 &mcu_pmx0 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
@@ -543,3 +499,5 @@
 		};
 	};
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..ea69fab9b52b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_m4fss_dma_memory_region: memory@9cb00000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9cb00000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_m4fss_memory_region: memory@9cc00000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9cc00000 0x00 0xe00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 5ecdd833587e..dc4b228a9fd7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -206,18 +206,6 @@
 			no-map;
 		};
 
-		mcu_m4fss_dma_memory_region: memory@9cb00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: memory@9cc00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
-			no-map;
-		};
-
 		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9da00000 0x00 0x100000>;
@@ -1334,38 +1322,6 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-	status = "okay";
-};
-
 /* Verdin CAN_1 */
 &main_mcan0 {
 	pinctrl-names = "default";
@@ -1549,3 +1505,5 @@
 	pinctrl-0 = <&pinctrl_wkup_uart0>;
 	status = "disabled";
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 05cba3cfc79e..241902fc1cf2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -58,18 +58,6 @@
 			linux,cma-default;
 		};
 
-		mcu_m4fss_dma_memory_region: memory@9cb00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: memory@9cc00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
-			no-map;
-		};
-
 		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9da00000 0x00 0x100000>;
@@ -477,38 +465,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-	status = "okay";
-};
-
 &usbss0 {
 	bootph-all;
 	status = "okay";
@@ -601,3 +557,5 @@
 	pinctrl-0 = <&main_epwm1_pins_default>;
 	status = "okay";
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"