Merge tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt

Microchip AT91 device tree updates for v6.13

It contains:
- device tree support for the Microchip SAM9X7 SoC and the Microchip
  SAM9X75 Curiosity board
- enable power monitor support for SAM9X60-EK, SAMA5D2-ICP,
  SAMA7G45 Curiosity, SAMA7G5-EK boards
- updates the uart nodes with missing properties
- device tree cleanups

* tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
  dt-bindings: arm: add sam9x75 curiosity board
  ARM: dts: at91: sam9x7: add device tree for SoC
  ARM: dts: microchip: Rename LED sub nodes name
  ARM: dts: microchip: Rename the pmic node
  ARM: dts: microchip: Rename the eeprom nodename
  ARM: dts: microchip: sama7g5ek: Add power monitor support
  ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
  ARM: dts: microchip: sama5d2_icp: Add power monitor support
  ARM: dts: microchip: sam9x60ek: Add power monitor support
  ARM: dts: microchip: Unify rng node names
  ARM: dts: microchip: Add trng labels for all at91 SoCs
  ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode

Link: https://lore.kernel.org/r/20241113182050.2176500-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

30 files changed, 1735 insertions, 42 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index 82f37328cc69..7160ec80ac1b 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -106,6 +106,12 @@ properties:
           - const: microchip,sam9x60
           - const: atmel,at91sam9
 
+      - description: Microchip SAM9X7 Evaluation Boards
+        items:
+          - const: microchip,sam9x75-curiosity
+          - const: microchip,sam9x7
+          - const: atmel,at91sam9
+
       - description: Nattis v2 board with Natte v2 power board
         items:
           - const: axentia,nattis-2
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile
index 0c45c8d17468..470fe46433a9 100644
--- a/arch/arm/boot/dts/microchip/Makefile
+++ b/arch/arm/boot/dts/microchip/Makefile
@@ -2,6 +2,7 @@
 # Enables support for device-tree overlays
 DTC_FLAGS_at91-sam9x60_curiosity := -@
 DTC_FLAGS_at91-sam9x60ek := -@
+DTC_FLAGS_at91-sam9x75_curiosity := -@
 DTC_FLAGS_at91-sama5d27_som1_ek := -@
 DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
 DTC_FLAGS_at91-sama5d29_curiosity := -@
@@ -60,6 +61,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 dtb-$(CONFIG_SOC_SAM9X60) += \
 	at91-sam9x60_curiosity.dtb \
 	at91-sam9x60ek.dtb
+dtb-$(CONFIG_SOC_SAM9X7) += \
+	at91-sam9x75_curiosity.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2-2.dtb \
 	at91-kizbox3-hs.dtb \
diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
index 742fcf525e1b..b65f80e1ef05 100644
--- a/arch/arm/boot/dts/microchip/aks-cdu.dts
+++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
@@ -98,23 +98,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
+			label = "red";
 			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
-		green {
+		led-green {
+			label = "green";
 			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
-		yellow {
+		led-yellow {
+			label = "yellow";
 			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		blue {
+		led-blue {
+			label = "blue";
 			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
index 29936bfbeeb7..7f527622d3f2 100644
--- a/arch/arm/boot/dts/microchip/animeo_ip.dts
+++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
@@ -146,23 +146,23 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power_green {
+		led-power-green {
 			label = "power_green";
 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		power_red {
+		led-power-red {
 			label = "power_red";
 			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_green {
+		led-tx-green {
 			label = "tx_green";
 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_red {
+		led-tx-red {
 			label = "tx_red";
 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
index e5e21dff882f..a44d92305dbb 100644
--- a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
@@ -85,7 +85,7 @@
 &i2c1 {
 	status = "okay";
 
-	pmic: act8865@5b {
+	act8865: pmic@5b {
 		compatible = "active-semi,act8865";
 		reg = <0x5b>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index 3b38707d736e..cdc56b53299d 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -53,17 +53,17 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -260,6 +260,37 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
+		power-monitor@17 {
+			compatible = "microchip,pac1934";
+			reg = <0x17>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIOM";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_MPU";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+		};
+
 		gpio_exp: mcp23008@20 {
 			compatible = "microchip,mcp23008";
 			reg = <0x20>;
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
new file mode 100644
index 000000000000..87b6ea97590b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x7.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X75 Curiosity";
+	compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "USER";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_0>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led_red: led-red {
+			label = "red";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_red_led_gpio_default>;
+		};
+
+		led_green: led-green {
+			label = "green";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_green_led_gpio_default>;
+		};
+
+		led_blue: led-blue {
+			label = "blue";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_blue_led_gpio_default>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx6_default>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			dcdc4: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl {
+	classd {
+		pinctrl_classd_default: classd-default {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu_default: dbgu-default {
+			atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				     <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx6_default: flx6-default {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: key-gpio-default {
+			atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s-default {
+			atmel,pins =
+				<AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SCK */
+				<AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SWS */
+				<AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDIN */
+				<AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDOUT */
+				<AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	led-controller {
+		pinctrl_red_led_gpio_default: red-led-gpio-default {
+			atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_green_led_gpio_default: green-led-gpio-default {
+			atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_blue_led_gpio_default: blue-led-gpio-default {
+			atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0-default {
+			atmel,pins =
+				<AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,				/* PA2 CK  periph A with pullup */
+				<AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA1 CMD periph A with pullup */
+				<AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA0 DAT0 periph A */
+				<AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA3 DAT1 periph A with pullup */
+				<AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA4 DAT2 periph A with pullup */
+				<AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>;	/* PA5 DAT3 periph A with pullup */
+		};
+	};
+}; /* pinctrl */
+
+&poweroff {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&tcb {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
index 95ecb7d040a8..8ac85dac5a96 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -106,7 +106,7 @@
 				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index c173f49cb910..ef11606a82b3 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -75,7 +75,7 @@
 	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	mcp16502@5b {
+	pmic@5b {
 		compatible = "microchip,mcp16502";
 		reg = <0x5b>;
 		lvin-supply = <&reg_5v>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
index 951a0c97d3c6..b6684bf67d3e 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -149,7 +149,7 @@
 	i2c-sda-hold-time-ns = <350>;
 	status = "okay";
 
-	mcp16502@5b {
+	pmic@5b {
 		compatible = "microchip,mcp16502";
 		reg = <0x5b>;
 		lvin-supply = <&reg_5v>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index 5e2bb517a480..9fa6f1395aa6 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -195,7 +195,38 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
-		mcp16502@5b {
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_1";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_2";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+		};
+
+		pmic@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
 			lvin-supply = <&reg_5v>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index 200b20515ab1..e4ae60ef5f8a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -231,7 +231,7 @@
 				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 6680031387e8..4bab3f25b855 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -411,7 +411,7 @@
 				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@54 {
+				eeprom@54 {
 					compatible = "atmel,24c02";
 					reg = <0x54>;
 					pagesize = <16>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
index 820033727088..5662992cf213 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
@@ -87,7 +87,7 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				pmic: act8865@5b {
+				act8865: pmic@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
 					status = "disabled";
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
index 645e49fdb7fe..2dec2218f32c 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -186,6 +186,37 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
+		power-monitor@1f {
+			compatible = "microchip,pac1934";
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCPU";
+			};
+		};
+
 		eeprom@51 {
 			compatible = "atmel,24c02";
 			reg = <0x51>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index ed75d491a246..0f5e6ad438dd 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -244,7 +244,38 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
-		mcp16502@5b {
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCPU";
+			};
+		};
+
+		pmic@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
 			lvin-supply = <&reg_5v>;
diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
index 4624a6f076f8..0bf472b157a5 100644
--- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -127,19 +127,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds2 {
+		led-ds2 {
 			label = "green";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		ds4 {
+		led-ds4 {
 			label = "yellow";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds6 {
+		led-ds6 {
 			label = "red";
 			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
index 720c15472c4a..e8e65e60564d 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -165,7 +165,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 		};
@@ -174,13 +174,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
index 045cb253f23a..a8f523131cd6 100644
--- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
@@ -192,19 +192,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds8 {
+		led-ds8 {
 			label = "ds8";
 			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		ds7 {
+		led-ds7 {
 			label = "ds7";
 			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index ce8baff6a9f4..f25692543d71 100644
--- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -219,13 +219,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
@@ -253,7 +253,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 			pagesize = <128>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
index 6de7a7cd3c07..1e62fd371ddb 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
@@ -14,13 +14,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
index 565b99e79c52..4e7cfbbd4241 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -220,7 +220,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 			vcc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
index c54eb21d5cba..157d306ef5c9 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
@@ -753,7 +753,7 @@
 				status = "disabled";
 			};
 
-			trng@fffcc000 {
+			trng: rng@fffcc000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfffcc000 0x100>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 04a6d716ecaf..36944e18a329 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -186,6 +186,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -388,6 +389,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -439,6 +441,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -486,7 +489,7 @@
 				clock-names = "sha_clk";
 			};
 
-			trng: trng@f0030000 {
+			trng: rng@f0030000 {
 				compatible = "microchip,sam9x60-trng";
 				reg = <0xf0030000 0x100>;
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -598,6 +601,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -649,6 +653,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -700,6 +705,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -751,6 +757,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -821,6 +828,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -891,6 +899,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -961,6 +970,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -1086,6 +1096,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -1137,6 +1148,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
new file mode 100644
index 000000000000..beb1f34b38d3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -0,0 +1,1220 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAM9X7 SoC";
+	compatible = "microchip,sam9x7";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			reg = <0>;
+			device_type = "cpu";
+		};
+	};
+
+	clocks {
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sdmmc0: mmc@80000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@90000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	apb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flx4: flexcom@f0000000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0000000 0x200>;
+			ranges = <0x0 0xf0000000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@f0004000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0004000 0x200>;
+			ranges = <0x0 0xf0004000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+			status = "disabled";
+
+			uart5: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi5: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@f0008000 {
+			compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
+			reg = <0xf0008000 0x1000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		ssc: ssc@f0010000 {
+			compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
+			reg = <0xf0010000 0x4000>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+			clock-names = "pclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(38))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(39))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2s: i2s@f001c000 {
+			compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
+			reg = <0xf001c000 0x100>;
+			interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(36))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(37))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		flx11: flexcom@f0020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0020000 0x200>;
+			ranges = <0x0 0xf0020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+			status = "disabled";
+
+			uart11: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx12: flexcom@f0024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0024000 0x200>;
+			ranges = <0x0 0xf0024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+			status = "disabled";
+
+			uart12: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		pit64b0: timer@f0028000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0028000 0x100>;
+			interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+			clock-names = "pclk", "gclk";
+		};
+
+		sha: crypto@f002c000 {
+			compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
+			reg = <0xf002c000 0x100>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "sha_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(34))>;
+			dma-names = "tx";
+		};
+
+		trng: rng@f0030000 {
+			compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
+			reg = <0xf0030000 0x100>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			status = "disabled";
+		};
+
+		aes: crypto@f0034000 {
+			compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
+			reg = <0xf0034000 0x100>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			clock-names = "aes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(32))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(33))>;
+			dma-names = "tx", "rx";
+		};
+
+		tdes: crypto@f0038000 {
+			compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xf0038000 0x100>;
+			interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(31))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(30))>;
+			dma-names = "tx", "rx";
+		};
+
+		classd: sound@f003c000 {
+			compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
+			reg = <0xf003c000 0x100>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(35))>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pit64b1: timer@f0040000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0040000 0x100>;
+			interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+		};
+
+		can0: can@f8000000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8000000 0x100>, <0x300000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <68 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@f8004000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <69 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		tcb: timer@f8008000 {
+			compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			reg = <0xf8008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
+			clock-names = "t0_clk", "gclk", "slow_clk";
+		};
+
+		flx6: flexcom@f8010000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8010000 0x200>;
+			ranges = <0x0 0xf8010000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@f8014000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8014000 0x200>;
+			ranges = <0x0 0xf8014000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@f8018000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8018000 0x200>;
+			ranges = <0x0 0xf8018000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+			status = "disabled";
+
+			uart8: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx0: flexcom@f801c000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf801c000 0x200>;
+			ranges = <0x0 0xf801c000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@f8020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8020000 0x200>;
+			ranges = <0x0 0xf8020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			status = "disabled";
+
+			uart1: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@f8024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8024000 0x200>;
+			ranges = <0x0 0xf8024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@f8028000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8028000 0x200>;
+			ranges = <0x0 0xf8028000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac: ethernet@f802c000 {
+			compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
+			reg = <0xf802c000 0x1000>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+				     <60 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+				     <61 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 2 */
+				     <62 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 3 */
+				     <63 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 4 */
+				     <64 IRQ_TYPE_LEVEL_HIGH 3>;	/* Queue 5 */
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
+			assigned-clock-rates = <266666666>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@f8034000 {
+			compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
+			reg = <0xf8034000 0x300>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		flx9: flexcom@f8040000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8040000 0x200>;
+			ranges = <0x0 0xf8040000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+			status = "disabled";
+
+			uart9: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@f8044000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8044000 0x200>;
+			ranges = <0x0 0xf8044000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+			status = "disabled";
+
+			uart10: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		matrix: matrix@ffffde00 {
+			compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
+			reg = <0xffffde00 0x200>;
+		};
+
+		pmecc: ecc-engine@ffffe000 {
+			compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
+			reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
+		};
+
+		mpddrc: mpddrc@ffffe800 {
+			compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
+			reg = <0xffffe800 0x200>;
+			clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+			clock-names = "ddrck", "mpddr";
+		};
+
+		smc: smc@ffffea00 {
+			compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
+			reg = <0xffffea00 0x100>;
+		};
+
+		aic: interrupt-controller@fffff100 {
+			compatible = "microchip,sam9x7-aic";
+			reg = <0xfffff100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			atmel,external-irqs = <31>;
+		};
+
+		dbgu: serial@fffff200 {
+			compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+			reg = <0xfffff200 0x200>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			clock-names = "usart";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(28))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(29))>;
+			dma-names = "tx", "rx";
+			atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@fffff400 {
+			compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
+			ranges = <0xfffff400 0xfffff400 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
+			atmel,mux-mask = <
+					 /*  A		B	   C	      D	  */
+					 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000	/* pioA */
+					 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000	/* pioB */
+					 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000	/* pioC */
+					 0x00003fff 0x00003fe0 0x0000003f 0x00000000	/* pioD */
+					 >;
+
+			pioA: gpio@fffff400 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <26>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <22>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			};
+		};
+
+		pmc: clock-controller@fffffc00 {
+			compatible = "microchip,sam9x7-pmc", "syscon";
+			reg = <0xfffffc00 0x200>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@fffffe00 {
+			compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
+			reg = <0xfffffe00 0x10>;
+			clocks = <&clk32k 0>;
+		};
+
+		poweroff: poweroff@fffffe10 {
+			compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
+			reg = <0xfffffe10 0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk32k 0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@fffffe20 {
+			compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xfffffe20 0x20>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@fffffe50 {
+			compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
+			reg = <0xfffffe50 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@fffffe60 {
+			compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+			reg = <0xfffffe60 0x10>;
+		};
+
+		rtc: rtc@fffffea8 {
+			compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
+			reg = <0xfffffea8 0x100>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		watchdog: watchdog@ffffff80 {
+			compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
+			reg = <0xffffff80 0x24>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi
index 5f8e297e19ed..3f99451aef83 100644
--- a/arch/arm/boot/dts/microchip/sama5d2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -1019,7 +1019,7 @@
 				};
 			};
 
-			trng@fc01c000 {
+			trng: rng@fc01c000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfc01c000 0x100>;
 				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
index 39865133aa56..70f380c399ce 100644
--- a/arch/arm/boot/dts/microchip/sama5d3.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -419,7 +419,7 @@
 				clock-names = "tdes_clk";
 			};
 
-			trng@f8040000 {
+			trng: rng@f8040000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xf8040000 0x100>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/microchip/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts
index bffd61397cb5..18943b873fff 100644
--- a/arch/arm/boot/dts/microchip/sama5d34ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts
@@ -36,7 +36,7 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				24c256@50 {
+				eeprom@50 {
 					compatible = "atmel,24c256";
 					reg = <0x50>;
 					pagesize = <64>;
diff --git a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
index 830a0954ba1b..362806afef44 100644
--- a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
@@ -79,7 +79,7 @@
 			};
 
 			i2c1: i2c@f0018000 {
-				pmic: act8865@5b {
+				act8865: pmic@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
 					status = "disabled";
diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
index b253ba33fc38..355132628604 100644
--- a/arch/arm/boot/dts/microchip/sama5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -658,7 +658,7 @@
 				status = "disabled";
 			};
 
-			trng@fc030000 {
+			trng: rng@fc030000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfc030000 0x100>;
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;