Merge tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT Changes for 4.8 #2:
 - New board: at91sam9260ek
 - Fixes for the sam9_l9260
 - Sama5d2 Xplained PMIC fix
 - Addition of the PMU node for the sama5d2

* tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: sama5d2_xplained: Update the pmic node
  ARM: dts: at91: sama5d2: add PMU node
  ARM: dts: at91: sam9_l9260: Modify information in LED nodes.
  ARM: dts: at91: sam9_l9260: Add pinctrl information to ethernet node.
  ARM: dts: at91: add at91sam9260ek board DT

Signed-off-by: Olof Johansson <olof@lixom.net>

5 files changed, 259 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 141f2e7a2e97..6dfefa36e7de 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	evk-pro3.dtb \
 	tny_a9260.dtb \
 	usb_a9260.dtb \
+	at91sam9260ek.dtb \
 	at91sam9261ek.dtb \
 	at91sam9263ek.dtb \
 	at91-sam9_l9260.dtb \
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index 349a46189bf1..814753ab26a0 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -49,6 +49,7 @@
 			};
 
 			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
 				phy-mode = "mii";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -105,11 +106,16 @@
 	leds {
 		compatible = "gpio-leds";
 
-		b0 {
-			label = "b0";
-			gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
 		};
 
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index eb4f1ac96271..0b9a59d5fdac 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -158,56 +158,64 @@
 				i2c-sda-hold-time-ns = <350>;
 				status = "okay";
 
-				pmic: act8865@5b {
-					compatible = "active-semi,act8865";
+				pmic@5b {
+					compatible = "active-semi,act8945a";
 					reg = <0x5b>;
 					active-semi,vsel-high;
+					active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+					active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+					active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+					active-semi,input-voltage-threshold-microvolt = <6600>;
+					active-semi,precondition-timeout = <40>;
+					active-semi,total-timeout = <3>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 					status = "okay";
 
 					regulators {
-						vdd_1v35_reg: DCDC_REG1 {
+						vdd_1v35_reg: REG_DCDC1 {
 							regulator-name = "VDD_1V35";
 							regulator-min-microvolt = <1350000>;
 							regulator-max-microvolt = <1350000>;
 							regulator-always-on;
 						};
 
-						vdd_1v2_reg: DCDC_REG2 {
+						vdd_1v2_reg: REG_DCDC2 {
 							regulator-name = "VDD_1V2";
 							regulator-min-microvolt = <1100000>;
 							regulator-max-microvolt = <1300000>;
 							regulator-always-on;
 						};
 
-						vdd_3v3_reg: DCDC_REG3 {
+						vdd_3v3_reg: REG_DCDC3 {
 							regulator-name = "VDD_3V3";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};
 
-						vdd_fuse_reg: LDO_REG1 {
+						vdd_fuse_reg: REG_LDO1 {
 							regulator-name = "VDD_FUSE";
 							regulator-min-microvolt = <2500000>;
 							regulator-max-microvolt = <2500000>;
 							regulator-always-on;
 						};
 
-						vdd_3v3_lp_reg: LDO_REG2 {
+						vdd_3v3_lp_reg: REG_LDO2 {
 							regulator-name = "VDD_3V3_LP";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};
 
-						vdd_led_reg: LDO_REG3 {
+						vdd_led_reg: REG_LDO3 {
 							regulator-name = "VDD_LED";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};
 
-						vdd_sdhc_1v8_reg: LDO_REG4 {
+						vdd_sdhc_1v8_reg: REG_LDO4 {
 							regulator-name = "VDD_SDHC_1V8";
 							regulator-min-microvolt = <1800000>;
 							regulator-max-microvolt = <1800000>;
@@ -309,6 +317,21 @@
 					bias-disable;
 				};
 
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
 				pinctrl_flx0_default: flx0_default {
 					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
 						 <PIN_PB29__FLEXCOM0_IO1>;
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
new file mode 100644
index 000000000000..0a29bd0dd9bf
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -0,0 +1,211 @@
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			gpio-key,wakeup;
+		};
+
+		btn4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2827e7ab5ebc..5d63206aab91 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -72,6 +72,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
 	memory {
 		reg = <0x20000000 0x20000000>;
 	};