diff options
| author | Chintan Vankar <c-vankar@ti.com> | 2025-07-09 16:23:23 +0530 |
|---|---|---|
| committer | Vignesh Raghavendra <vigneshr@ti.com> | 2025-07-10 09:50:14 +0530 |
| commit | 7cc984fb30d5c2a780fee0f4b2d4ad2001961c6b (patch) | |
| tree | 16846cfc7e8e98489705af91bdda7a1af5dedfb2 | |
| parent | 1544bca2f188e47256b61ae5e24ea93a292bb559 (diff) | |
arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot
Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to required nodes to enable Ethernet boot
on SK-AM68.
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://lore.kernel.org/r/20250709105326.232608-2-c-vankar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 5fa70a874d7b..e84c504c87d2 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -344,6 +344,7 @@ J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ >; + bootph-all; }; mcu_mdio_pins_default: mcu-mdio-default-pins { @@ -351,6 +352,7 @@ J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; + bootph-all; }; mcu_mcan0_pins_default: mcu-mcan0-default-pins { @@ -412,6 +414,14 @@ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_gpio0 { status = "okay"; pinctrl-names = "default"; @@ -626,6 +636,7 @@ &davinci_mdio { phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; @@ -635,6 +646,7 @@ &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; + bootph-all; }; &mcu_mcan0 { |