diff options
| author | Tristram Ha <tristram.ha@microchip.com> | 2025-08-06 17:54:53 -0700 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2025-08-08 13:18:18 -0700 |
| commit | 829f45f9d992019b49f08ab425ca11288b084aed (patch) | |
| tree | 23b81e42ffaeebb7ba33580fa42036e6027abd9a | |
| parent | fd60d8a086191fe33c2d719732d2482052fa6805 (diff) | |
net: dsa: microchip: Fix KSZ8863 reset problem
ksz8873_valid_regs[] was added for register access for KSZ8863/KSZ8873
switches, but the reset register is not in the list so
ksz8_reset_switch() does not take any effect.
Replace regmap_update_bits() using ksz_regmap_8 with ksz_rmw8() so that
an error message will be given if the register is not defined.
A side effect of not resetting the switch is the static MAC table is not
cleared. Further additions to the table will show write error as there
are only 8 entries in the table.
Fixes: d0dec3333040 ("net: dsa: microchip: Add register access control for KSZ8873 chip")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250807005453.8306-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8.c | 20 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 1 |
2 files changed, 12 insertions, 9 deletions
diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c index 76e490070e9c..c354abdafc1b 100644 --- a/drivers/net/dsa/microchip/ksz8.c +++ b/drivers/net/dsa/microchip/ksz8.c @@ -36,15 +36,14 @@ static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); + ksz_rmw8(dev, addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), - dev->dev_ops->get_port_addr(port, offset), - bits, set ? bits : 0); + ksz_rmw8(dev, dev->dev_ops->get_port_addr(port, offset), bits, + set ? bits : 0); } /** @@ -1955,16 +1954,19 @@ int ksz8_setup(struct dsa_switch *ds) ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); /* Enable aggressive back off algorithm in half duplex mode. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, - SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + if (ret) + return ret; /* * Make sure unicast VLAN boundary is set as default and * enable no excessive collision drop. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + ret = ksz_rmw8(dev, REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + if (ret) + return ret; ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 7292bfe2f7ca..4cb14288ff0f 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1447,6 +1447,7 @@ static const struct regmap_range ksz8873_valid_regs[] = { regmap_reg_range(0x3f, 0x3f), /* advanced control registers */ + regmap_reg_range(0x43, 0x43), regmap_reg_range(0x60, 0x6f), regmap_reg_range(0x70, 0x75), regmap_reg_range(0x76, 0x78), |