net: phy: realtek: create rtl8211f_config_rgmii_delay()

The control flow in rtl8211f_config_init() has some pitfalls which were
probably unintended. Specifically it has an early return:

	switch (phydev->interface) {
	...
	default: /* the rest of the modes imply leaving delay as is. */
		return 0;
	}

which exits the entire config_init() function. This means it also skips
doing things such as disabling CLKOUT or disabling PHY-mode EEE.

For the RTL8211FS, which uses PHY_INTERFACE_MODE_SGMII, this might be a
problem. However, I don't know that it is, so there is no Fixes: tag.
The issue was observed through code inspection.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 39 insertions, 26 deletions

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 417f9a88aab6..896351022682 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -587,22 +587,11 @@ static int rtl8211c_config_init(struct phy_device *phydev)
 			    CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
 }
 
-static int rtl8211f_config_init(struct phy_device *phydev)
+static int rtl8211f_config_rgmii_delay(struct phy_device *phydev)
 {
-	struct rtl821x_priv *priv = phydev->priv;
-	struct device *dev = &phydev->mdio.dev;
 	u16 val_txdly, val_rxdly;
 	int ret;
 
-	ret = phy_modify_paged_changed(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1,
-				       RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF,
-				       priv->phycr1);
-	if (ret < 0) {
-		dev_err(dev, "aldps mode  configuration failed: %pe\n",
-			ERR_PTR(ret));
-		return ret;
-	}
-
 	switch (phydev->interface) {
 	case PHY_INTERFACE_MODE_RGMII:
 		val_txdly = 0;
@@ -632,34 +621,58 @@ static int rtl8211f_config_init(struct phy_device *phydev)
 				       RTL8211F_TXCR, RTL8211F_TX_DELAY,
 				       val_txdly);
 	if (ret < 0) {
-		dev_err(dev, "Failed to update the TX delay register\n");
+		phydev_err(phydev, "Failed to update the TX delay register: %pe\n",
+			   ERR_PTR(ret));
 		return ret;
 	} else if (ret) {
-		dev_dbg(dev,
-			"%s 2ns TX delay (and changing the value from pin-strapping RXD1 or the bootloader)\n",
-			str_enable_disable(val_txdly));
+		phydev_dbg(phydev,
+			   "%s 2ns TX delay (and changing the value from pin-strapping RXD1 or the bootloader)\n",
+			   str_enable_disable(val_txdly));
 	} else {
-		dev_dbg(dev,
-			"2ns TX delay was already %s (by pin-strapping RXD1 or bootloader configuration)\n",
-			str_enabled_disabled(val_txdly));
+		phydev_dbg(phydev,
+			   "2ns TX delay was already %s (by pin-strapping RXD1 or bootloader configuration)\n",
+			   str_enabled_disabled(val_txdly));
 	}
 
 	ret = phy_modify_paged_changed(phydev, RTL8211F_RGMII_PAGE,
 				       RTL8211F_RXCR, RTL8211F_RX_DELAY,
 				       val_rxdly);
 	if (ret < 0) {
-		dev_err(dev, "Failed to update the RX delay register\n");
+		phydev_err(phydev, "Failed to update the RX delay register: %pe\n",
+			   ERR_PTR(ret));
 		return ret;
 	} else if (ret) {
-		dev_dbg(dev,
-			"%s 2ns RX delay (and changing the value from pin-strapping RXD0 or the bootloader)\n",
-			str_enable_disable(val_rxdly));
+		phydev_dbg(phydev,
+			   "%s 2ns RX delay (and changing the value from pin-strapping RXD0 or the bootloader)\n",
+			   str_enable_disable(val_rxdly));
 	} else {
-		dev_dbg(dev,
-			"2ns RX delay was already %s (by pin-strapping RXD0 or bootloader configuration)\n",
-			str_enabled_disabled(val_rxdly));
+		phydev_dbg(phydev,
+			   "2ns RX delay was already %s (by pin-strapping RXD0 or bootloader configuration)\n",
+			   str_enabled_disabled(val_rxdly));
 	}
 
+	return 0;
+}
+
+static int rtl8211f_config_init(struct phy_device *phydev)
+{
+	struct rtl821x_priv *priv = phydev->priv;
+	struct device *dev = &phydev->mdio.dev;
+	int ret;
+
+	ret = phy_modify_paged_changed(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1,
+				       RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF,
+				       priv->phycr1);
+	if (ret < 0) {
+		dev_err(dev, "aldps mode  configuration failed: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	ret = rtl8211f_config_rgmii_delay(phydev);
+	if (ret)
+		return ret;
+
 	if (!priv->has_phycr2)
 		return 0;