diff options
| author | Stefan Ekenberg <stefan.ekenberg@axis.com> | 2024-11-19 08:40:29 +0100 |
|---|---|---|
| committer | Dmitry Baryshkov <dmitry.baryshkov@linaro.org> | 2024-12-20 03:53:02 +0200 |
| commit | 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 (patch) | |
| tree | aa78598d17d3ab5fb84e3d210d15115c3b0cfc07 | |
| parent | 1b684ca15f9d78f45de3cdba7e19611387e16aa7 (diff) | |
drm/bridge: adv7511_audio: Update Audio InfoFrame properly
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
| -rw-r--r-- | drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 14 |
1 files changed, 12 insertions, 2 deletions
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c index 61f4a38e7d2b..8f786592143b 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c @@ -153,7 +153,16 @@ static int adv7511_hdmi_hw_params(struct device *dev, void *data, ADV7511_AUDIO_CFG3_LEN_MASK, len); regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4); - regmap_write(adv7511->regmap, 0x73, 0x1); + + /* send current Audio infoframe values while updating */ + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, + BIT(5), BIT(5)); + + regmap_write(adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME(0), 0x1); + + /* use Audio infoframe updated info */ + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, + BIT(5), 0); return 0; } @@ -184,8 +193,9 @@ static int audio_startup(struct device *dev, void *data) regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0), BIT(7) | BIT(6), BIT(7)); /* use Audio infoframe updated info */ - regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1), + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, BIT(5), 0); + /* enable SPDIF receiver */ if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF) regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, |