drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resume

On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.

When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.

To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.

Fixes: 7875afafba84 ("drm/amd/display: Fix brightness level not retained over reboot")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

2 files changed, 15 insertions, 4 deletions

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index f76d2ef9ca5c..8170923b3c76 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2081,6 +2081,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 
 	dc_hardware_init(adev->dm.dc);
 
+	adev->dm.restore_backlight = true;
+
 	adev->dm.hpd_rx_offload_wq = hpd_rx_irq_create_workqueue(adev);
 	if (!adev->dm.hpd_rx_offload_wq) {
 		drm_err(adev_to_drm(adev), "failed to create hpd rx offload workqueue.\n");
@@ -3436,6 +3438,7 @@ static int dm_resume(struct amdgpu_ip_block *ip_block)
 		dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D0);
 
 		dc_resume(dm->dc);
+		adev->dm.restore_backlight = true;
 
 		amdgpu_dm_irq_resume_early(adev);
 
@@ -9927,7 +9930,6 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
 	bool mode_set_reset_required = false;
 	u32 i;
 	struct dc_commit_streams_params params = {dc_state->streams, dc_state->stream_count};
-	bool set_backlight_level = false;
 
 	/* Disable writeback */
 	for_each_old_connector_in_state(state, connector, old_con_state, i) {
@@ -10047,7 +10049,6 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
 			acrtc->hw_mode = new_crtc_state->mode;
 			crtc->hwmode = new_crtc_state->mode;
 			mode_set_reset_required = true;
-			set_backlight_level = true;
 		} else if (modereset_required(new_crtc_state)) {
 			drm_dbg_atomic(dev,
 				       "Atomic commit: RESET. crtc id %d:[%p]\n",
@@ -10104,13 +10105,16 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
 	 * to fix a flicker issue.
 	 * It will cause the dm->actual_brightness is not the current panel brightness
 	 * level. (the dm->brightness is the correct panel level)
-	 * So we set the backlight level with dm->brightness value after set mode
+	 * So we set the backlight level with dm->brightness value after initial
+	 * set mode. Use restore_backlight flag to avoid setting backlight level
+	 * for every subsequent mode set.
 	 */
-	if (set_backlight_level) {
+	if (dm->restore_backlight) {
 		for (i = 0; i < dm->num_of_edps; i++) {
 			if (dm->backlight_dev[i])
 				amdgpu_dm_backlight_set_level(dm, i, dm->brightness[i]);
 		}
+		dm->restore_backlight = false;
 	}
 }
 
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index 2967cd28efe4..69441980c3fa 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -626,6 +626,13 @@ struct amdgpu_display_manager {
 	u32 actual_brightness[AMDGPU_DM_MAX_NUM_EDP];
 
 	/**
+	 * @restore_backlight:
+	 *
+	 * Flag to indicate whether to restore backlight after modeset.
+	 */
+	bool restore_backlight;
+
+	/**
 	 * @aux_hpd_discon_quirk:
 	 *
 	 * quirk for hpd discon while aux is on-going.