diff options
| author | Luca Weiss <luca.weiss@fairphone.com> | 2022-10-28 09:54:05 +0200 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2022-11-07 17:25:46 -0600 |
| commit | ce1b5eb74b3ef042b1c797f04e8683e7cad34ae6 (patch) | |
| tree | c930d4a4e15351418c40c9c7ce1c52a5eb53ab87 | |
| parent | 16c0c46f38183573de5361d278772cfed2090b1c (diff) | |
arm64: dts: qcom: pm6150l: add temp sensor and thermal zone config
Add temp-alarm device tree node and a default configuration for the
corresponding thermal zone for this PMIC. Temperatures are based on
downstream values, except for trip2 where 125°C is used instead of 145°C
due to limitations without a configured ADC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221028075405.124809-2-luca.weiss@fairphone.com
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pm6150l.dtsi | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 8a7c18b134c7..0cf99a53a309 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -5,6 +5,37 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm6150l-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm6150l_lsid4: pmic@4 { compatible = "qcom,pm6150l", "qcom,spmi-pmic"; @@ -12,6 +43,13 @@ #address-cells = <1>; #size-cells = <0>; + pm6150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm6150l_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; |