arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts

SolidRun HummingBoard-T has two options for M.2 connector, supporting
either PCI-E or USB-3.1 Gen 1 - depending on configuration of a mux
on the serdes lane.
The required configurations in device-tree were modeled as overlays.

The USB-3.1 overlay uses /delete-property/ to unset a boolean property
on the usb controller limiting it to USB-2.0 by default.
Overlays can not delete a property from the base dtb, therefore this
overlay is at this time useless.

Convert both overlays into full dts by including the base board dts.
While the pcie overlay was functional, both are converted for a
consistent user experience when selecting between the two mutually
exclusive configurations.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-devicetree/CAMuHMdXTgpTnJ9U7egC2XjFXXNZ5uiY1O+WxNd6LPJW5Rs5KTw@mail.gmail.com
Fixes: bbef42084cc1 ("arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20250101-am64-hb-fix-overlay-v2-1-78143f5da28c@solid-run.com
Signed-off-by: Nishanth Menon <nm@ti.com>

3 files changed, 16 insertions, 15 deletions

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index db5ae27467e7..8a4bdf87e2d4 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -42,10 +42,6 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
 
 # Boards with AM64x SoC
-k3-am642-hummingboard-t-pcie-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-pcie.dtbo
-k3-am642-hummingboard-t-usb3-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
index bd9a5caf20da..023b2a6aaa56 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
@@ -2,17 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with PCI-E.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with PCI-E";
+};
+
 &pcie0_rc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_pins>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
index ffcc3bd3c7bc..ee9bd618f370 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
@@ -2,16 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with USB-3.1 Gen 1.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with USB-3.1 Gen 1";
+};
+
 &serdes0 {
 	#address-cells = <1>;
 	#size-cells = <0>;