Merge tag 'asoc-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.3

Quite a few fixes here but they're all very small and driver specific,
none of them really stand out if you aren't using the relevant hardware
but they're all useful if you do happen to have an affected device.

10 files changed, 83 insertions, 139 deletions

diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index 9f71c06aebf6..209ded16806b 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -39,6 +39,7 @@
 	 mfc0	\dest, CP0_CONFIG, 3
 	andi	\dest, \dest, MIPS_CONF3_MT
 	beqz	\dest, \nomt
+	 nop
 	.endm
 
 .section .text.cps-vec
@@ -223,10 +224,9 @@ LEAF(excep_ejtag)
 	END(excep_ejtag)
 
 LEAF(mips_cps_core_init)
-#ifdef CONFIG_MIPS_MT
+#ifdef CONFIG_MIPS_MT_SMP
 	/* Check that the core implements the MT ASE */
 	has_mt	t0, 3f
-	 nop
 
 	.set	push
 	.set	mips64r2
@@ -310,8 +310,9 @@ LEAF(mips_cps_boot_vpes)
 	PTR_ADDU t0, t0, t1
 
 	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
+	li	t9, 0
+#ifdef CONFIG_MIPS_MT_SMP
 	has_mt	ta2, 1f
-	 li	t9, 0
 
 	/* Find the number of VPEs present in the core */
 	mfc0	t1, CP0_MVPCONF0
@@ -330,6 +331,7 @@ LEAF(mips_cps_boot_vpes)
 	/* Retrieve the VPE ID from EBase.CPUNum */
 	mfc0	t9, $15, 1
 	and	t9, t9, t1
+#endif
 
 1:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
 	li	t1, VPEBOOTCFG_SIZE
@@ -337,7 +339,7 @@ LEAF(mips_cps_boot_vpes)
 	PTR_L	ta3, COREBOOTCFG_VPECONFIG(t0)
 	PTR_ADDU v0, v0, ta3
 
-#ifdef CONFIG_MIPS_MT
+#ifdef CONFIG_MIPS_MT_SMP
 
 	/* If the core doesn't support MT then return */
 	bnez	ta2, 1f
@@ -451,7 +453,7 @@ LEAF(mips_cps_boot_vpes)
 
 2:	.set	pop
 
-#endif /* CONFIG_MIPS_MT */
+#endif /* CONFIG_MIPS_MT_SMP */
 
 	/* Return */
 	jr	ra
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 571a8e6ea5bd..09a51d091941 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -410,16 +410,18 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 static inline unsigned int decode_config0(struct cpuinfo_mips *c)
 {
 	unsigned int config0;
-	int isa;
+	int isa, mt;
 
 	config0 = read_c0_config();
 
 	/*
 	 * Look for Standard TLB or Dual VTLB and FTLB
 	 */
-	if ((((config0 & MIPS_CONF_MT) >> 7) == 1) ||
-	    (((config0 & MIPS_CONF_MT) >> 7) == 4))
+	mt = config0 & MIPS_CONF_MT;
+	if (mt == MIPS_CONF_MT_TLB)
 		c->options |= MIPS_CPU_TLB;
+	else if (mt == MIPS_CONF_MT_FTLB)
+		c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB;
 
 	isa = (config0 & MIPS_CONF_AT) >> 13;
 	switch (isa) {
@@ -559,15 +561,18 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 	if (cpu_has_tlb) {
 		if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
 			c->options |= MIPS_CPU_TLBINV;
+
 		/*
-		 * This is a bit ugly. R6 has dropped that field from
-		 * config4 and the only valid configuration is VTLB+FTLB so
-		 * set a good value for mmuextdef for that case.
+		 * R6 has dropped the MMUExtDef field from config4.
+		 * On R6 the fields always describe the FTLB, and only if it is
+		 * present according to Config.MT.
 		 */
-		if (cpu_has_mips_r6)
+		if (!cpu_has_mips_r6)
+			mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+		else if (cpu_has_ftlb)
 			mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT;
 		else
-			mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+			mmuextdef = 0;
 
 		switch (mmuextdef) {
 		case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index 423ae83af1fb..3375745b9198 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -18,7 +18,7 @@
 	.set pop
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *		       struct thread_info *next_ti, int usedfpu)
+ *		       struct thread_info *next_ti)
  */
 	.align	7
 	LEAF(resume)
@@ -28,30 +28,6 @@
 	cpu_save_nonscratch a0
 	LONG_S	ra, THREAD_REG31(a0)
 
-	/*
-	 * check if we need to save FPU registers
-	 */
-	.set push
-	.set noreorder
-	beqz	a3, 1f
-	 PTR_L	t3, TASK_THREAD_INFO(a0)
-	.set pop
-
-	/*
-	 * clear saved user stack CU1 bit
-	 */
-	LONG_L	t0, ST_OFF(t3)
-	li	t1, ~ST0_CU1
-	and	t0, t0, t1
-	LONG_S	t0, ST_OFF(t3)
-
-	.set push
-	.set arch=mips64r2
-	fpu_save_double a0 t0 t1		# c0_status passed in t0
-						# clobbers t1
-	.set pop
-1:
-
 #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	/* Check if we need to store CVMSEG state */
 	dmfc0	t0, $11,7	/* CvmMemCtl */
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 5087a4b72e6b..ac27ef7d4d0e 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -31,18 +31,8 @@
 #define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
 
 /*
- * FPU context is saved iff the process has used it's FPU in the current
- * time slice as indicated by TIF_USEDFPU.  In any case, the CU1 bit for user
- * space STATUS register should be 0, so that a process *always* starts its
- * userland with FPU disabled after each context switch.
- *
- * FPU will be enabled as soon as the process accesses FPU again, through
- * do_cpu() trap.
- */
-
-/*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *		       struct thread_info *next_ti, int usedfpu)
+ *		       struct thread_info *next_ti)
  */
 LEAF(resume)
 	mfc0	t1, CP0_STATUS
@@ -50,22 +40,6 @@ LEAF(resume)
 	cpu_save_nonscratch a0
 	sw	ra, THREAD_REG31(a0)
 
-	beqz	a3, 1f
-
-	PTR_L	t3, TASK_THREAD_INFO(a0)
-
-	/*
-	 * clear saved user stack CU1 bit
-	 */
-	lw	t0, ST_OFF(t3)
-	li	t1, ~ST0_CU1
-	and	t0, t0, t1
-	sw	t0, ST_OFF(t3)
-
-	fpu_save_single a0, t0			# clobbers t0
-
-1:
-
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
 	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 4cc13508d967..65a74e4f0f45 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -36,16 +36,8 @@ NESTED(handle_sys, PT_SIZE, sp)
 	lw	t1, PT_EPC(sp)		# skip syscall on return
 
 	subu	v0, v0, __NR_O32_Linux	# check syscall number
-	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
 	addiu	t1, 4			# skip to next instruction
 	sw	t1, PT_EPC(sp)
-	beqz	t0, illegal_syscall
-
-	sll	t0, v0, 2
-	la	t1, sys_call_table
-	addu	t1, t0
-	lw	t2, (t1)		# syscall routine
-	beqz	t2, illegal_syscall
 
 	sw	a3, PT_R26(sp)		# save a3 for syscall restarting
 
@@ -96,6 +88,16 @@ loads_done:
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
 	bnez	t0, syscall_trace_entry # -> yes
+syscall_common:
+	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, illegal_syscall
+
+	sll	t0, v0, 2
+	la	t1, sys_call_table
+	addu	t1, t0
+	lw	t2, (t1)		# syscall routine
+
+	beqz	t2, illegal_syscall
 
 	jalr	t2			# Do The Real Thing (TM)
 
@@ -116,7 +118,7 @@ o32_syscall_exit:
 
 syscall_trace_entry:
 	SAVE_STATIC
-	move	s0, t2
+	move	s0, v0
 	move	a0, sp
 
 	/*
@@ -129,27 +131,18 @@ syscall_trace_entry:
 
 1:	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
+
+	move	v0, s0			# restore syscall
 
-	move	t0, s0
 	RESTORE_STATIC
 	lw	a0, PT_R4(sp)		# Restore argument registers
 	lw	a1, PT_R5(sp)
 	lw	a2, PT_R6(sp)
 	lw	a3, PT_R7(sp)
-	jalr	t0
-
-	li	t0, -EMAXERRNO - 1	# error?
-	sltu	t0, t0, v0
-	sw	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	lw	t1, PT_R2(sp)		# syscall number
-	negu	v0			# error
-	sw	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sw	v0, PT_R2(sp)		# result
+	j	syscall_common
 
-2:	j	syscall_exit
+1:	j	syscall_exit
 
 /* ------------------------------------------------------------------------ */
 
@@ -599,3 +592,5 @@ EXPORT(sys_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 4355 */
 	PTR	sys_execveat
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index a6f6b762c47a..e732981cf99f 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -39,18 +39,11 @@ NESTED(handle_sys64, PT_SIZE, sp)
 	.set	at
 #endif
 
-	dsubu	t0, v0, __NR_64_Linux	# check syscall number
-	sltiu	t0, t0, __NR_64_Linux_syscalls + 1
 #if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
 	ld	t1, PT_EPC(sp)		# skip syscall on return
 	daddiu	t1, 4			# skip to next instruction
 	sd	t1, PT_EPC(sp)
 #endif
-	beqz	t0, illegal_syscall
-
-	dsll	t0, v0, 3		# offset into table
-	ld	t2, (sys_call_table - (__NR_64_Linux * 8))(t0)
-					# syscall routine
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
@@ -59,6 +52,17 @@ NESTED(handle_sys64, PT_SIZE, sp)
 	and	t0, t1, t0
 	bnez	t0, syscall_trace_entry
 
+syscall_common:
+	dsubu	t2, v0, __NR_64_Linux
+	sltiu   t0, t2, __NR_64_Linux_syscalls + 1
+	beqz	t0, illegal_syscall
+
+	dsll	t0, t2, 3		# offset into table
+	dla	t2, sys_call_table
+	daddu	t0, t2, t0
+	ld	t2, (t0)		# syscall routine
+	beqz	t2, illegal_syscall
+
 	jalr	t2			# Do The Real Thing (TM)
 
 	li	t0, -EMAXERRNO - 1	# error?
@@ -78,14 +82,14 @@ n64_syscall_exit:
 
 syscall_trace_entry:
 	SAVE_STATIC
-	move	s0, t2
+	move	s0, v0
 	move	a0, sp
 	move	a1, v0
 	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
 
-	move	t0, s0
+	move	v0, s0
 	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
@@ -93,19 +97,9 @@ syscall_trace_entry:
 	ld	a3, PT_R7(sp)
 	ld	a4, PT_R8(sp)
 	ld	a5, PT_R9(sp)
-	jalr	t0
-
-	li	t0, -EMAXERRNO - 1	# error?
-	sltu	t0, t0, v0
-	sd	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	ld	t1, PT_R2(sp)		# syscall number
-	dnegu	v0			# error
-	sd	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sd	v0, PT_R2(sp)		# result
+	j	syscall_common
 
-2:	j	syscall_exit
+1:	j	syscall_exit
 
 illegal_syscall:
 	/* This also isn't a 64-bit syscall, throw an error.  */
@@ -436,4 +430,6 @@ EXPORT(sys_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 5315 */
 	PTR	sys_execveat
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 4b2010654c46..c79484397584 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -52,6 +52,7 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 	and	t0, t1, t0
 	bnez	t0, n32_syscall_trace_entry
 
+syscall_common:
 	jalr	t2			# Do The Real Thing (TM)
 
 	li	t0, -EMAXERRNO - 1	# error?
@@ -75,9 +76,9 @@ n32_syscall_trace_entry:
 	move	a1, v0
 	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
 
-	move	t0, s0
+	move	t2, s0
 	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
@@ -85,19 +86,9 @@ n32_syscall_trace_entry:
 	ld	a3, PT_R7(sp)
 	ld	a4, PT_R8(sp)
 	ld	a5, PT_R9(sp)
-	jalr	t0
+	j	syscall_common
 
-	li	t0, -EMAXERRNO - 1	# error?
-	sltu	t0, t0, v0
-	sd	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	ld	t1, PT_R2(sp)		# syscall number
-	dnegu	v0			# error
-	sd	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sd	v0, PT_R2(sp)		# result
-
-2:	j	syscall_exit
+1:	j	syscall_exit
 
 not_n32_scall:
 	/* This is not an n32 compatibility syscall, pass it on to
@@ -429,4 +420,6 @@ EXPORT(sysn32_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf
 	PTR	compat_sys_execveat		/* 6320 */
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index f543ff4feef9..6369cfd390c6 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -87,6 +87,7 @@ loads_done:
 	and	t0, t1, t0
 	bnez	t0, trace_a_syscall
 
+syscall_common:
 	jalr	t2			# Do The Real Thing (TM)
 
 	li	t0, -EMAXERRNO - 1	# error?
@@ -130,9 +131,9 @@ trace_a_syscall:
 
 1:	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
 
-	move	t0, s0
+	move	t2, s0
 	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
@@ -142,19 +143,9 @@ trace_a_syscall:
 	ld	a5, PT_R9(sp)
 	ld	a6, PT_R10(sp)
 	ld	a7, PT_R11(sp)		# For indirect syscalls
-	jalr	t0
+	j	syscall_common
 
-	li	t0, -EMAXERRNO - 1	# error?
-	sltu	t0, t0, v0
-	sd	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	ld	t1, PT_R2(sp)		# syscall number
-	dnegu	v0			# error
-	sd	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sd	v0, PT_R2(sp)		# result
-
-2:	j	syscall_exit
+1:	j	syscall_exit
 
 /* ------------------------------------------------------------------------ */
 
@@ -584,4 +575,6 @@ EXPORT(sys32_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 4355 */
 	PTR	compat_sys_execveat
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier
 	.size	sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 35b8316002f8..479515109e5b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -338,7 +338,7 @@ static void __init bootmem_init(void)
 		if (end <= reserved_end)
 			continue;
 #ifdef CONFIG_BLK_DEV_INITRD
-		/* mapstart should be after initrd_end */
+		/* Skip zones before initrd and initrd itself */
 		if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
 			continue;
 #endif
@@ -371,6 +371,14 @@ static void __init bootmem_init(void)
 		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 	}
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	/*
+	 * mapstart should be after initrd_end
+	 */
+	if (initrd_end)
+		mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
+#endif
+
 	/*
 	 * Initialize the boot-time allocator with low memory only.
 	 */
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index a31896c33716..bd4385a8e6e8 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -42,6 +42,7 @@
 #include <asm/mmu_context.h>
 #include <asm/time.h>
 #include <asm/setup.h>
+#include <asm/maar.h>
 
 cpumask_t cpu_callin_map;		/* Bitmask of started secondaries */
 
@@ -157,6 +158,7 @@ asmlinkage void start_secondary(void)
 	mips_clockevent_init();
 	mp_ops->init_secondary();
 	cpu_report();
+	maar_init();
 
 	/*
 	 * XXX parity protection should be folded in here when it's converted