summaryrefslogtreecommitdiff
path: root/drivers/cdx/controller/cdx_controller.c
diff options
context:
space:
mode:
authorVincent Mailhol <mailhol@kernel.org>2025-09-18 18:00:25 +0900
committerMarc Kleine-Budde <mkl@pengutronix.de>2025-09-19 19:03:01 +0200
commitac1c7656fa717f29fac3ea073af63f0b9919ec9a (patch)
tree3517285e06fabf804194a26922f5020a092a7c66 /drivers/cdx/controller/cdx_controller.c
parent38c0abad45b190a30d8284a37264d2127a6ec303 (diff)
can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to directly reach the xmit() function of a CAN driver. The only check which is performed by the PF_PACKET framework is to make sure that skb->len fits the interface's MTU. Unfortunately, because the sun4i_can driver does not populate its net_device_ops->ndo_change_mtu(), it is possible for an attacker to configure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999 After doing so, the attacker could open a PF_PACKET socket using the ETH_P_CANXL protocol: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL)) to inject a malicious CAN XL frames. For example: struct canxl_frame frame = { .flags = 0xff, .len = 2048, }; The CAN drivers' xmit() function are calling can_dev_dropped_skb() to check that the skb is valid, unfortunately under above conditions, the malicious packet is able to go through can_dev_dropped_skb() checks: 1. the skb->protocol is set to ETH_P_CANXL which is valid (the function does not check the actual device capabilities). 2. the length is a valid CAN XL length. And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is not able to correctly handle and will thus misinterpret it as a CAN frame. The driver will consume frame->len as-is with no further checks. This can result in a buffer overflow later on in hi3110_hw_tx() on this line: memcpy(buf + HI3110_FIFO_EXT_DATA_OFF, frame->data, frame->len); Here, frame->len corresponds to the flags field of the CAN XL frame. In our previous example, we set canxl_frame->flags to 0xff. Because the maximum expected length is 8, a buffer overflow of 247 bytes occurs! Populate net_device_ops->ndo_change_mtu() to ensure that the interface's MTU can not be set to anything bigger than CAN_MTU. By fixing the root cause, this prevents the buffer overflow. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-2-0d1cada9393b@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/cdx/controller/cdx_controller.c')
0 files changed, 0 insertions, 0 deletions