Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:

 - updated support for Synaptics RMI4 devices, including support for
   SMBus controllers, firmware update support, sensor tuning, and PS/2
   guest support

 - ALPS driver now supports tracksticks on SS5 controllers

 - i8042 now uses chassis info to skip selftest on Asus laptops as list
   of individual models became too unwieldy

 - miscellaneous fixes to other drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits)
  Input: imx6ul_tsc - generalize the averaging property
  Input: drv260x - use generic device properties
  Input: drv260x - use temporary for &client->dev
  Input: drv260x - fix input device's parent assignment
  Input: synaptics-rmi4 - add support for F34 V7 bootloader
  Input: drv260x - fix initializing overdrive voltage
  Input: ALPS - fix protcol -> protocol
  Input: i8042 - comment #else/#endif of CONFIG_PNP
  Input: lpc32xx-keys - fix invalid error handling of a requested irq
  Input: synaptics-rmi4 - fix debug for sensor clip
  Input: synaptics-rmi4 - store the attn data in the driver
  Input: synaptics-rmi4 - allow to add attention data
  Input: synaptics-rmi4 - f03 - grab data passed by transport device
  Input: synaptics-rmi4 - add support for F03
  Input: imx6ul_tsc - convert int to u32
  Input: imx6ul_tsc - add mask when set REG_ADC_CFG
  Input: synaptics-rmi4 - have only one struct platform data
  Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions
  Input: synaptics-rmi4 - remove mutex calls while updating the firmware
  Input: drv2667 - fix misuse of regmap_update_bits
  ...

1 files changed, 33 insertions, 86 deletions

diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index 2adfd86c869a..0a2b865b1000 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -18,8 +18,6 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -27,7 +25,6 @@
 #include <linux/regulator/consumer.h>
 
 #include <dt-bindings/input/ti-drv260x.h>
-#include <linux/platform_data/drv260x-pdata.h>
 
 #define DRV260X_STATUS		0x0
 #define DRV260X_MODE		0x1
@@ -468,90 +465,39 @@ static const struct regmap_config drv260x_regmap_config = {
 	.cache_type = REGCACHE_NONE,
 };
 
-#ifdef CONFIG_OF
-static int drv260x_parse_dt(struct device *dev,
-			    struct drv260x_data *haptics)
-{
-	struct device_node *np = dev->of_node;
-	unsigned int voltage;
-	int error;
-
-	error = of_property_read_u32(np, "mode", &haptics->mode);
-	if (error) {
-		dev_err(dev, "%s: No entry for mode\n", __func__);
-		return error;
-	}
-
-	error = of_property_read_u32(np, "library-sel", &haptics->library);
-	if (error) {
-		dev_err(dev, "%s: No entry for library selection\n",
-			__func__);
-		return error;
-	}
-
-	error = of_property_read_u32(np, "vib-rated-mv", &voltage);
-	if (!error)
-		haptics->rated_voltage = drv260x_calculate_voltage(voltage);
-
-
-	error = of_property_read_u32(np, "vib-overdrive-mv", &voltage);
-	if (!error)
-		haptics->overdrive_voltage = drv260x_calculate_voltage(voltage);
-
-	return 0;
-}
-#else
-static inline int drv260x_parse_dt(struct device *dev,
-				   struct drv260x_data *haptics)
-{
-	dev_err(dev, "no platform data defined\n");
-
-	return -EINVAL;
-}
-#endif
-
 static int drv260x_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct device *dev = &client->dev;
 	struct drv260x_data *haptics;
+	u32 voltage;
 	int error;
 
-	haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
+	haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
 	if (!haptics)
 		return -ENOMEM;
 
-	haptics->rated_voltage = DRV260X_DEF_OD_CLAMP_VOLT;
-	haptics->rated_voltage = DRV260X_DEF_RATED_VOLT;
-
-	if (pdata) {
-		haptics->mode = pdata->mode;
-		haptics->library = pdata->library_selection;
-		if (pdata->vib_overdrive_voltage)
-			haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage);
-		if (pdata->vib_rated_voltage)
-			haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage);
-	} else if (client->dev.of_node) {
-		error = drv260x_parse_dt(&client->dev, haptics);
-		if (error)
-			return error;
-	} else {
-		dev_err(&client->dev, "Platform data not set\n");
-		return -ENODEV;
+	error = device_property_read_u32(dev, "mode", &haptics->mode);
+	if (error) {
+		dev_err(dev, "Can't fetch 'mode' property: %d\n", error);
+		return error;
 	}
 
-
 	if (haptics->mode < DRV260X_LRA_MODE ||
 	    haptics->mode > DRV260X_ERM_MODE) {
-		dev_err(&client->dev,
-			"Vibrator mode is invalid: %i\n",
-			haptics->mode);
+		dev_err(dev, "Vibrator mode is invalid: %i\n", haptics->mode);
 		return -EINVAL;
 	}
 
+	error = device_property_read_u32(dev, "library-sel", &haptics->library);
+	if (error) {
+		dev_err(dev, "Can't fetch 'library-sel' property: %d\n", error);
+		return error;
+	}
+
 	if (haptics->library < DRV260X_LIB_EMPTY ||
 	    haptics->library > DRV260X_ERM_LIB_F) {
-		dev_err(&client->dev,
+		dev_err(dev,
 			"Library value is invalid: %i\n", haptics->library);
 		return -EINVAL;
 	}
@@ -559,40 +505,44 @@ static int drv260x_probe(struct i2c_client *client,
 	if (haptics->mode == DRV260X_LRA_MODE &&
 	    haptics->library != DRV260X_LIB_EMPTY &&
 	    haptics->library != DRV260X_LIB_LRA) {
-		dev_err(&client->dev,
-			"LRA Mode with ERM Library mismatch\n");
+		dev_err(dev, "LRA Mode with ERM Library mismatch\n");
 		return -EINVAL;
 	}
 
 	if (haptics->mode == DRV260X_ERM_MODE &&
 	    (haptics->library == DRV260X_LIB_EMPTY ||
 	     haptics->library == DRV260X_LIB_LRA)) {
-		dev_err(&client->dev,
-			"ERM Mode with LRA Library mismatch\n");
+		dev_err(dev, "ERM Mode with LRA Library mismatch\n");
 		return -EINVAL;
 	}
 
-	haptics->regulator = devm_regulator_get(&client->dev, "vbat");
+	error = device_property_read_u32(dev, "vib-rated-mv", &voltage);
+	haptics->rated_voltage = error ? DRV260X_DEF_RATED_VOLT :
+					 drv260x_calculate_voltage(voltage);
+
+	error = device_property_read_u32(dev, "vib-overdrive-mv", &voltage);
+	haptics->overdrive_voltage = error ? DRV260X_DEF_OD_CLAMP_VOLT :
+					     drv260x_calculate_voltage(voltage);
+
+	haptics->regulator = devm_regulator_get(dev, "vbat");
 	if (IS_ERR(haptics->regulator)) {
 		error = PTR_ERR(haptics->regulator);
-		dev_err(&client->dev,
-			"unable to get regulator, error: %d\n", error);
+		dev_err(dev, "unable to get regulator, error: %d\n", error);
 		return error;
 	}
 
-	haptics->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
+	haptics->enable_gpio = devm_gpiod_get_optional(dev, "enable",
 						       GPIOD_OUT_HIGH);
 	if (IS_ERR(haptics->enable_gpio))
 		return PTR_ERR(haptics->enable_gpio);
 
-	haptics->input_dev = devm_input_allocate_device(&client->dev);
+	haptics->input_dev = devm_input_allocate_device(dev);
 	if (!haptics->input_dev) {
 		dev_err(&client->dev, "Failed to allocate input device\n");
 		return -ENOMEM;
 	}
 
 	haptics->input_dev->name = "drv260x:haptics";
-	haptics->input_dev->dev.parent = client->dev.parent;
 	haptics->input_dev->close = drv260x_close;
 	input_set_drvdata(haptics->input_dev, haptics);
 	input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
@@ -600,8 +550,7 @@ static int drv260x_probe(struct i2c_client *client,
 	error = input_ff_create_memless(haptics->input_dev, NULL,
 					drv260x_haptics_play);
 	if (error) {
-		dev_err(&client->dev, "input_ff_create() failed: %d\n",
-			error);
+		dev_err(dev, "input_ff_create() failed: %d\n", error);
 		return error;
 	}
 
@@ -613,21 +562,19 @@ static int drv260x_probe(struct i2c_client *client,
 	haptics->regmap = devm_regmap_init_i2c(client, &drv260x_regmap_config);
 	if (IS_ERR(haptics->regmap)) {
 		error = PTR_ERR(haptics->regmap);
-		dev_err(&client->dev, "Failed to allocate register map: %d\n",
-			error);
+		dev_err(dev, "Failed to allocate register map: %d\n", error);
 		return error;
 	}
 
 	error = drv260x_init(haptics);
 	if (error) {
-		dev_err(&client->dev, "Device init failed: %d\n", error);
+		dev_err(dev, "Device init failed: %d\n", error);
 		return error;
 	}
 
 	error = input_register_device(haptics->input_dev);
 	if (error) {
-		dev_err(&client->dev, "couldn't register input device: %d\n",
-			error);
+		dev_err(dev, "couldn't register input device: %d\n", error);
 		return error;
 	}