Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Allwinner A100 RGB LED controller
   - Add support for Maxim 5970 Dual Hot-swap controller

  New Device Support:
   - Add support for AW20108 to Awinic LED driver

  New Functionality:
   - Extend support for Net speeds to include; 2.5G, 5G and 10G
   - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
     via sysfs if required
   - Add support for hardware control in AW200xx

  Fix-ups:
   - Use safer methods for string handling
   - Improve error handling; return proper error values, simplify,
     avoid duplicates, etc
   - Replace Mutex use with the Completion mechanism
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Use generic platform device properties
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Device Tree binding adaptions/conversions/creation
   - Continue work to remove superfluous platform .remove() call-backs
   - Remove superfluous/defunct code
   - Trivial; whitespace, unused variables, spelling, clean-ups, etc
   - Avoid unnecessary duplicate locks

  Bug Fixes:
   - Repair Kconfig based dependency lists
   - Ensure unused dynamically allocated data is freed after use
   - Fix support for brightness control
   - Add missing sufficient delays during reset to ensure correct
     operation
   - Avoid division-by-zero issues"

* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
  leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
  leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  leds: sun50i-a100: Convert to be agnostic to property provider
  leds: max5970: Add missing headers
  leds: max5970: Make use of dev_err_probe()
  leds: max5970: Make use of device properties
  leds: max5970: Remove unused variable
  leds: rgb: Drop obsolete dependency on COMPILE_TEST
  leds: sun50i-a100: Avoid division-by-zero warning
  leds: trigger: Remove unused function led_trigger_rename_static()
  leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
  leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
  dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
  dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
  dt-bindings: leds: awinic,aw200xx: Add AW20108 device
  leds: aw200xx: Add support for aw20108 device
  leds: aw200xx: Improve autodim calculation method
  leds: aw200xx: Enable disable_locking flag in regmap config
  leds: aw200xx: Add delay after software reset
  dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
  ...

1 files changed, 46 insertions, 1 deletions

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index d76214fa9ad8..8e5475819590 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -38,6 +38,16 @@
  * tx -  LED blinks on transmitted data
  * rx -  LED blinks on receive data
  *
+ * Note: If the user selects a mode that is not supported by hw, default
+ * behavior is to fall back to software control of the LED. However not every
+ * hw supports software control. LED callbacks brightness_set() and
+ * brightness_set_blocking() are NULL in this case. hw_control_is_supported()
+ * should use available means supported by hw to inform the user that selected
+ * mode isn't supported by hw. This could be switching off the LED or any
+ * hw blink mode. If software control fallback isn't possible, we return
+ * -EOPNOTSUPP to the user, but still store the selected mode. This is needed
+ * in case an intermediate unsupported mode is necessary to switch from one
+ * supported mode to another.
  */
 
 struct led_netdev_data {
@@ -99,6 +109,18 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
 		    trigger_data->link_speed == SPEED_1000)
 			blink_on = true;
 
+		if (test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_2500)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_5000)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_10000)
+			blink_on = true;
+
 		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
 		    trigger_data->duplex == DUPLEX_HALF)
 			blink_on = true;
@@ -289,6 +311,9 @@ static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
 	case TRIGGER_NETDEV_LINK_10:
 	case TRIGGER_NETDEV_LINK_100:
 	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_LINK_2500:
+	case TRIGGER_NETDEV_LINK_5000:
+	case TRIGGER_NETDEV_LINK_10000:
 	case TRIGGER_NETDEV_HALF_DUPLEX:
 	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
@@ -306,6 +331,7 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 				     size_t size, enum led_trigger_netdev_modes attr)
 {
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
 	unsigned long state, mode = trigger_data->mode;
 	int ret;
 	int bit;
@@ -319,6 +345,9 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	case TRIGGER_NETDEV_LINK_10:
 	case TRIGGER_NETDEV_LINK_100:
 	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_LINK_2500:
+	case TRIGGER_NETDEV_LINK_5000:
+	case TRIGGER_NETDEV_LINK_10000:
 	case TRIGGER_NETDEV_HALF_DUPLEX:
 	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
@@ -337,7 +366,10 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
 	    (test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
 	     test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
-	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode)))
+	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_2500, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_5000, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_10000, &mode)))
 		return -EINVAL;
 
 	cancel_delayed_work_sync(&trigger_data->work);
@@ -345,6 +377,10 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	trigger_data->mode = mode;
 	trigger_data->hw_control = can_hw_control(trigger_data);
 
+	if (!led_cdev->brightness_set && !led_cdev->brightness_set_blocking &&
+	    !trigger_data->hw_control)
+		return -EOPNOTSUPP;
+
 	set_baseline_state(trigger_data);
 
 	return size;
@@ -367,6 +403,9 @@ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
 DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
 DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
 DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
+DEFINE_NETDEV_TRIGGER(link_2500, TRIGGER_NETDEV_LINK_2500);
+DEFINE_NETDEV_TRIGGER(link_5000, TRIGGER_NETDEV_LINK_5000);
+DEFINE_NETDEV_TRIGGER(link_10000, TRIGGER_NETDEV_LINK_10000);
 DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
 DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
 DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
@@ -425,6 +464,9 @@ static struct attribute *netdev_trig_attrs[] = {
 	&dev_attr_link_10.attr,
 	&dev_attr_link_100.attr,
 	&dev_attr_link_1000.attr,
+	&dev_attr_link_2500.attr,
+	&dev_attr_link_5000.attr,
+	&dev_attr_link_10000.attr,
 	&dev_attr_full_duplex.attr,
 	&dev_attr_half_duplex.attr,
 	&dev_attr_rx.attr,
@@ -522,6 +564,9 @@ static void netdev_trig_work(struct work_struct *work)
 			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
 		interval = jiffies_to_msecs(