Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 154 insertions, 9 deletions

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 7c142c17b3f6..7292bfe2f7ca 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -331,6 +331,38 @@ static const struct phylink_mac_ops ksz8_phylink_mac_ops = {
 	.mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi,
 };
 
+static const struct ksz_dev_ops ksz8463_dev_ops = {
+	.setup = ksz8_setup,
+	.get_port_addr = ksz8463_get_port_addr,
+	.cfg_port_member = ksz8_cfg_port_member,
+	.flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
+	.port_setup = ksz8_port_setup,
+	.r_phy = ksz8463_r_phy,
+	.w_phy = ksz8463_w_phy,
+	.r_mib_cnt = ksz8_r_mib_cnt,
+	.r_mib_pkt = ksz8_r_mib_pkt,
+	.r_mib_stat64 = ksz88xx_r_mib_stats64,
+	.freeze_mib = ksz8_freeze_mib,
+	.port_init_cnt = ksz8_port_init_cnt,
+	.fdb_dump = ksz8_fdb_dump,
+	.fdb_add = ksz8_fdb_add,
+	.fdb_del = ksz8_fdb_del,
+	.mdb_add = ksz8_mdb_add,
+	.mdb_del = ksz8_mdb_del,
+	.vlan_filtering = ksz8_port_vlan_filtering,
+	.vlan_add = ksz8_port_vlan_add,
+	.vlan_del = ksz8_port_vlan_del,
+	.mirror_add = ksz8_port_mirror_add,
+	.mirror_del = ksz8_port_mirror_del,
+	.get_caps = ksz8_get_caps,
+	.config_cpu_port = ksz8_config_cpu_port,
+	.enable_stp_addr = ksz8_enable_stp_addr,
+	.reset = ksz8_reset_switch,
+	.init = ksz8_switch_init,
+	.exit = ksz8_switch_exit,
+	.change_mtu = ksz8_change_mtu,
+};
+
 static const struct ksz_dev_ops ksz88xx_dev_ops = {
 	.setup = ksz8_setup,
 	.get_port_addr = ksz8_get_port_addr,
@@ -517,6 +549,60 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.exit = lan937x_switch_exit,
 };
 
+static const u16 ksz8463_regs[] = {
+	[REG_SW_MAC_ADDR]		= 0x10,
+	[REG_IND_CTRL_0]		= 0x30,
+	[REG_IND_DATA_8]		= 0x26,
+	[REG_IND_DATA_CHECK]		= 0x26,
+	[REG_IND_DATA_HI]		= 0x28,
+	[REG_IND_DATA_LO]		= 0x2C,
+	[REG_IND_MIB_CHECK]		= 0x2F,
+	[P_FORCE_CTRL]			= 0x0C,
+	[P_LINK_STATUS]			= 0x0E,
+	[P_LOCAL_CTRL]			= 0x0C,
+	[P_NEG_RESTART_CTRL]		= 0x0D,
+	[P_REMOTE_STATUS]		= 0x0E,
+	[P_SPEED_STATUS]		= 0x0F,
+	[S_TAIL_TAG_CTRL]		= 0xAD,
+	[P_STP_CTRL]			= 0x6F,
+	[S_START_CTRL]			= 0x01,
+	[S_BROADCAST_CTRL]		= 0x06,
+	[S_MULTICAST_CTRL]		= 0x04,
+};
+
+static const u32 ksz8463_masks[] = {
+	[PORT_802_1P_REMAPPING]		= BIT(3),
+	[SW_TAIL_TAG_ENABLE]		= BIT(0),
+	[MIB_COUNTER_OVERFLOW]		= BIT(7),
+	[MIB_COUNTER_VALID]		= BIT(6),
+	[VLAN_TABLE_FID]		= GENMASK(15, 12),
+	[VLAN_TABLE_MEMBERSHIP]		= GENMASK(18, 16),
+	[VLAN_TABLE_VALID]		= BIT(19),
+	[STATIC_MAC_TABLE_VALID]	= BIT(19),
+	[STATIC_MAC_TABLE_USE_FID]	= BIT(21),
+	[STATIC_MAC_TABLE_FID]		= GENMASK(25, 22),
+	[STATIC_MAC_TABLE_OVERRIDE]	= BIT(20),
+	[STATIC_MAC_TABLE_FWD_PORTS]	= GENMASK(18, 16),
+	[DYNAMIC_MAC_TABLE_ENTRIES_H]	= GENMASK(1, 0),
+	[DYNAMIC_MAC_TABLE_MAC_EMPTY]	= BIT(2),
+	[DYNAMIC_MAC_TABLE_NOT_READY]	= BIT(7),
+	[DYNAMIC_MAC_TABLE_ENTRIES]	= GENMASK(31, 24),
+	[DYNAMIC_MAC_TABLE_FID]		= GENMASK(19, 16),
+	[DYNAMIC_MAC_TABLE_SRC_PORT]	= GENMASK(21, 20),
+	[DYNAMIC_MAC_TABLE_TIMESTAMP]	= GENMASK(23, 22),
+};
+
+static u8 ksz8463_shifts[] = {
+	[VLAN_TABLE_MEMBERSHIP_S]	= 16,
+	[STATIC_MAC_FWD_PORTS]		= 16,
+	[STATIC_MAC_FID]		= 22,
+	[DYNAMIC_MAC_ENTRIES_H]		= 8,
+	[DYNAMIC_MAC_ENTRIES]		= 24,
+	[DYNAMIC_MAC_FID]		= 16,
+	[DYNAMIC_MAC_TIMESTAMP]		= 22,
+	[DYNAMIC_MAC_SRC_PORT]		= 20,
+};
+
 static const u16 ksz8795_regs[] = {
 	[REG_SW_MAC_ADDR]		= 0x68,
 	[REG_IND_CTRL_0]		= 0x6E,
@@ -1387,6 +1473,29 @@ static const struct regmap_access_table ksz8873_register_set = {
 };
 
 const struct ksz_chip_data ksz_switch_chips[] = {
+	[KSZ8463] = {
+		.chip_id = KSZ8463_CHIP_ID,
+		.dev_name = "KSZ8463",
+		.num_vlans = 16,
+		.num_alus = 0,
+		.num_statics = 8,
+		.cpu_ports = 0x4,	/* can be configured as cpu port */
+		.port_cnt = 3,
+		.num_tx_queues = 4,
+		.num_ipms = 4,
+		.ops = &ksz8463_dev_ops,
+		.phylink_mac_ops = &ksz88x3_phylink_mac_ops,
+		.mib_names = ksz88xx_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz8463_regs,
+		.masks = ksz8463_masks,
+		.shifts = ksz8463_shifts,
+		.supports_mii = {false, false, true},
+		.supports_rmii = {false, false, true},
+		.internal_phy = {true, true, false},
+	},
+
 	[KSZ8563] = {
 		.chip_id = KSZ8563_CHIP_ID,
 		.dev_name = "KSZ8563",
@@ -2786,8 +2895,7 @@ static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq)
 	kirq->dev = dev;
 	kirq->masked = ~0;
 
-	kirq->domain = irq_domain_create_simple(of_fwnode_handle(dev->dev->of_node),
-						kirq->nirqs, 0,
+	kirq->domain = irq_domain_create_simple(dev_fwnode(dev->dev), kirq->nirqs, 0,
 						&ksz_irq_domain_ops, kirq);
 	if (!kirq->domain)
 		return -ENOMEM;
@@ -2843,6 +2951,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev);
 static int ksz_setup(struct dsa_switch *ds)
 {
 	struct ksz_device *dev = ds->priv;
+	u16 storm_mask, storm_rate;
 	struct dsa_port *dp;
 	struct ksz_port *p;
 	const u16 *regs;
@@ -2872,10 +2981,14 @@ static int ksz_setup(struct dsa_switch *ds)
 	}
 
 	/* set broadcast storm protection 10% rate */
+	storm_mask = BROADCAST_STORM_RATE;
+	storm_rate = (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
+	if (ksz_is_ksz8463(dev)) {
+		storm_mask = swab16(storm_mask);
+		storm_rate = swab16(storm_rate);
+	}
 	regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL],
-			   BROADCAST_STORM_RATE,
-			   (BROADCAST_STORM_VALUE *
-			   BROADCAST_STORM_PROT_RATE) / 100);
+			   storm_mask, storm_rate);
 
 	dev->dev_ops->config_cpu_port(ds);
 
@@ -3401,6 +3514,7 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
 		proto = DSA_TAG_PROTO_KSZ8795;
 
 	if (dev->chip_id == KSZ88X3_CHIP_ID ||
+	    dev->chip_id == KSZ8463_CHIP_ID ||
 	    dev->chip_id == KSZ8563_CHIP_ID ||
 	    dev->chip_id == KSZ9893_CHIP_ID ||
 	    dev->chip_id == KSZ9563_CHIP_ID)
@@ -3513,6 +3627,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
 	case KSZ8794_CHIP_ID:
 	case KSZ8765_CHIP_ID:
 		return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+	case KSZ8463_CHIP_ID:
 	case KSZ88X3_CHIP_ID:
 	case KSZ8864_CHIP_ID:
 	case KSZ8895_CHIP_ID:
@@ -3867,6 +3982,9 @@ static int ksz_switch_detect(struct ksz_device *dev)
 	id2 = FIELD_GET(SW_CHIP_ID_M, id16);
 
 	switch (id1) {
+	case KSZ84_FAMILY_ID:
+		dev->chip_id = KSZ8463_CHIP_ID;
+		break;
 	case KSZ87_FAMILY_ID:
 		if (id2 == KSZ87_CHIP_ID_95) {
 			u8 val;
@@ -4108,6 +4226,17 @@ static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p,
 	return p->bands - 1 - band;
 }
 
+static u8 ksz8463_tc_ctrl(int port, int queue)
+{
+	u8 reg;
+
+	reg = 0xC8 + port * 4;
+	reg += ((3 - queue) / 2) * 2;
+	reg++;
+	reg -= (queue & 1);
+	return reg;
+}
+
 /**
  * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection)
  *                      for a port on KSZ88x3 switch
@@ -4143,6 +4272,8 @@ static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port,
 		 * port/queue
 		 */
 		reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue);
+		if (ksz_is_ksz8463(dev))
+			reg = ksz8463_tc_ctrl(port, queue);
 
 		/* Clear WFQ enable bit to select strict priority scheduling */
 		ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0);
@@ -4178,6 +4309,8 @@ static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port)
 		 * port/queue
 		 */
 		reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue);
+		if (ksz_is_ksz8463(dev))
+			reg = ksz8463_tc_ctrl(port, queue);
 
 		/* Set WFQ enable bit to revert back to default scheduling
 		 * mode
@@ -4325,7 +4458,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
 	struct ksz_device *dev = ds->priv;
 	int ret;
 
-	if (is_ksz8(dev) && !ksz_is_ksz88x3(dev))
+	if (is_ksz8(dev) && !(ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)))
 		return -EOPNOTSUPP;
 
 	if (qopt->parent != TC_H_ROOT) {
@@ -4339,13 +4472,13 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
 		if (ret)
 			return ret;
 
-		if (ksz_is_ksz88x3(dev))
+		if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev))
 			return ksz88x3_tc_ets_add(dev, port,
 						  &qopt->replace_params);
 		else
 			return ksz_tc_ets_add(dev, port, &qopt->replace_params);
 	case TC_ETS_DESTROY:
-		if (ksz_is_ksz88x3(dev))
+		if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev))
 			return ksz88x3_tc_ets_del(dev, port);
 		else
 			return ksz_tc_ets_del(dev, port);
@@ -4688,7 +4821,16 @@ int ksz_switch_macaddr_get(struct dsa_switch *ds, int port,
 
 	/* Program the switch MAC address to hardware */
 	for (i = 0; i < ETH_ALEN; i++) {
-		ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]);
+		if (ksz_is_ksz8463(dev)) {
+			u16 addr16 = ((u16)addr[i] << 8) | addr[i + 1];
+
+			ret = ksz_write16(dev, regs[REG_SW_MAC_ADDR] + i,
+					  addr16);
+			i++;
+		} else {
+			ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i,
+					 addr[i]);
+		}
 		if (ret)
 			goto macaddr_drop;
 	}
@@ -5297,6 +5439,9 @@ int ksz_switch_register(struct ksz_device *dev)
 						&dev->ports[port_num].interface);
 
 				ksz_parse_rgmii_delay(dev, port_num, port);
+				dev->ports[port_num].fiber =
+					of_property_read_bool(port,
+							      "micrel,fiber-mode");
 			}
 			of_node_put(ports);
 		}