Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.

Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.

This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:

- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.

This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.

---

Matti Vaittinen (6):
  dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
  dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
  mfd: Support ROHM BD9576MUF and BD9573MUF
  wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
  regulator: Support ROHM BD9576MUF and BD9573MUF
  MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers

 .../bindings/mfd/rohm,bd9576-pmic.yaml        | 129 +++++++
 .../regulator/rohm,bd9576-regulator.yaml      |  33 ++
 MAINTAINERS                                   |   4 +
 drivers/mfd/Kconfig                           |  11 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rohm-bd9576.c                     | 130 +++++++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/bd9576-regulator.c          | 337 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |  13 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/bd9576_wdt.c                 | 295 +++++++++++++++
 include/linux/mfd/rohm-bd957x.h               |  61 ++++
 include/linux/mfd/rohm-generic.h              |   2 +
 14 files changed, 1028 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 drivers/regulator/bd9576-regulator.c
 create mode 100644 drivers/watchdog/bd9576_wdt.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

8 files changed, 13 insertions, 9 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 0837ae0e0c5e..e731db900ee0 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1061,7 +1061,7 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 	switch (speed) {
 	case 2000:
 		reg |= PORT_OVERRIDE_SPEED_2000M;
-		/* fallthrough */
+		fallthrough;
 	case SPEED_1000:
 		reg |= PORT_OVERRIDE_SPEED_1000M;
 		break;
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c
index 629bf14128a2..5ae3d9783b68 100644
--- a/drivers/net/dsa/b53/b53_serdes.c
+++ b/drivers/net/dsa/b53/b53_serdes.c
@@ -170,7 +170,7 @@ void b53_serdes_phylink_validate(struct b53_device *dev, int port,
 	switch (lane) {
 	case 0:
 		phylink_set(supported, 2500baseX_Full);
-		/* fallthrough */
+		fallthrough;
 	case 1:
 		phylink_set(supported, 1000baseX_Full);
 		break;
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index bafddb35f3a9..5ebff986a1ac 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -566,7 +566,7 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_RGMII:
 		id_mode_dis = 1;
-		/* fallthrough */
+		fallthrough;
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		port_mode = EXT_GPHY;
 		break;
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index dc999406ce86..3cb22d149813 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1083,7 +1083,7 @@ static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
 		interface = PHY_INTERFACE_MODE_GMII;
 		if (gbit)
 			break;
-		/* fall through */
+		fallthrough;
 	case 0:
 		interface = PHY_INTERFACE_MODE_MII;
 		break;
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8dcb8a49ab67..1aaf47a0da2b 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -566,7 +566,7 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 	case P5_INTF_SEL_PHY_P0:
 		/* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
 		val |= MHWTRAP_PHY0_SEL;
-		/* fall through */
+		fallthrough;
 	case P5_INTF_SEL_PHY_P4:
 		/* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
 		val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
@@ -1326,14 +1326,17 @@ mt7530_setup(struct dsa_switch *ds)
 
 			if (phy_node->parent == priv->dev->of_node->parent) {
 				ret = of_get_phy_mode(mac_np, &interface);
-				if (ret && ret != -ENODEV)
+				if (ret && ret != -ENODEV) {
+					of_node_put(mac_np);
 					return ret;
+				}
 				id = of_mdio_parse_addr(ds->dev, phy_node);
 				if (id == 0)
 					priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
 				if (id == 4)
 					priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
 			}
+			of_node_put(mac_np);
 			of_node_put(phy_node);
 			break;
 		}
@@ -1501,7 +1504,7 @@ unsupported:
 		phylink_set(mask, 100baseT_Full);
 
 		if (state->interface != PHY_INTERFACE_MODE_MII) {
-			phylink_set(mask, 1000baseT_Half);
+			/* This switch only supports 1G full-duplex. */
 			phylink_set(mask, 1000baseT_Full);
 			if (port == 5)
 				phylink_set(mask, 1000baseX_Full);
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 7a71c9902e73..f0dbc05e30a4 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -875,7 +875,7 @@ static uint64_t _mv88e6xxx_get_ethtool_stat(struct mv88e6xxx_chip *chip,
 		break;
 	case STATS_TYPE_BANK1:
 		reg = bank1_select;
-		/* fall through */
+		fallthrough;
 	case STATS_TYPE_BANK0:
 		reg |= s->reg | histogram;
 		mv88e6xxx_g1_stats_read(chip, reg, &low);
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index c69d9592a2b7..04bfa6e465ff 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -400,6 +400,7 @@ static int felix_parse_ports_node(struct felix *felix,
 		if (err < 0) {
 			dev_err(dev, "Unsupported PHY mode %s on port %d\n",
 				phy_modes(phy_mode), port);
+			of_node_put(child);
 			return err;
 		}
 
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index c3f6f124e5f0..5a28dfb36ec3 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -3415,7 +3415,7 @@ static int sja1105_check_device_id(struct sja1105_private *priv)
 
 	sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID);
 
-	for (match = sja1105_dt_ids; match->compatible; match++) {
+	for (match = sja1105_dt_ids; match->compatible[0]; match++) {
 		const struct sja1105_info *info = match->data;
 
 		/* Is what's been probed in our match table at all? */